Gypsum board, cement board, ceiling tiles, mineral fibre tiles, fastners, steel profiles, access panel.
Over Print Varnish provides glossy finish and protection from print scuff. Can be applied as: Spot Varnish were design elements can be highlighted and enhance. Solid Varnish were whole label has glossy finish.
Over Lamination provides glossy finish and protection from scratches while increasing its durable characteristic of resisting water and UV exposure
Decorative surface mounted lighting fixture water and dust proof with flexible design for Compact fluorescent and LED light source. High Efficacy of 110LM/W and has variety of housing finish (White, Gray, Black)
Direct print instantly Digital Label Printing showcases high quality print and maximum efficiency with decoration, die cutting, UV LED curing and finishing, all inline. Allowing on-demand printing, shorter turnaround time and modification of image (Variable Data)
EWH water heaters with the brand name ( STAR ) a trusted name which enjoys the confidence and support from our satisfied customers. Our products range with sizes from 30 Liters to 100 Liters and the outer body is made of EPOXY which increase the products rust resistant and improve its resistant against external weather factors. Design and Formations: • Star Water Heater tank made from iron panels according to the specifications. • Insulation layer to preserve the temperature for long period and prevent the leakage. • The external cover painted by resistance layer to the rust and weather factors. • Water intake and out put pines rust proof. • High quality heat unit. • High quality lower safety valve. • Easily control of the temperature. • Available with following sizes: • 30 liters, 50 liters, 80liters and 100 liters (Electricity 220/127). Storage / Tankless Storage Installation Wall Mounted Certification SASO, ISO Housing Material Stainless Steel Capacity 50 Power (W) 1200 Voltage (V) 220 Place of Origin Saudi Arabia Brand Name Star Electrical Water Heaters Model Number Star 30 Liter Water Heater vertical or horizontal White.
EWH water heaters with the brand name ( STAR ) a trusted name which enjoys the confidence and support from our satisfied customers. Our products range with sizes from 30 Liters to 100 Liters and the outer body is made of EPOXY which increase the products rust resistant and improve its resistant against external weather factors. Design and Formations: • Star Water Heater tank made from iron panels according to the specifications. • Insulation layer to preserve the temperature for long period and prevent the leakage. • The external cover painted by resistance layer to the rust and weather factors. • Water intake and out put pines rust proof. • High quality heat unit. • High quality lower safety valve. • Easily control of the temperature. • Available with following sizes: • 30 liters, 50 liters, 80liters and 100 liters (Electricity 220/127). Storage / Tankless Storage Installation Wall Mounted Certification SASO, ISO Housing Material Stainless Steel Capacity 100 Power (W) 1200 Voltage (V) 220 Place of Origin Saudi Arabia Brand Name Star Electrical Water Heaters Model Number Star 100 Liter Water Heater vertical or horizontal White.
WB1001/ CC1001 JANITOL PLUS Janitol Plus is Blend of anionic and nonionic surfactants and sequestering agents, water soluble alkaline multipurpose heavy duty degreaser for industrial cleaning and oilfield Rig washing applications. 25L, 200L WB1002 CHEMARA WB51 Chemara-WB51 is Water based Heavy Duty degreaser, blend of surfactants and non caustic alkaline detergents, and de rusters specifically formulated to melt away oily deposits from hard surfaces, Rigs and oilfield equipment. 25L, 200L WB1003 CHEMARA SLICK Chemara Slick is formulation of Alkaline detergents and water soluble solvents to remove the grease, paraffin, light oils and heavy oils. Used for cleaning of rig wash and equipment cleaning applications in the oil fields. 25L, 200L WB1004 CHEMARA-AC1100 Chemara-AC1100 is inhibited hydrochloric acid, used for scale removing applications. 1000L , IBC WB1005 CHEMARA-AC1101 Chemara-AC1101 is Sulfamic acid-powder chemical, used for descaling applications in various industries and power generation plants. 25 kg WB1006 CHEMARA-ALBRITE Chemara-ALBRITE is blend of inorganic acid and surfactants, specially designed for cleaning of aluminum metal surfaces. 25L ,200L WB-1007 CHEMARA-ALKLIN CHEMARA-ALKLIN is a heavy duty Alkaline degreaser developed to meet the heavy duty degreasing applications, for removal of grease, oil, dirt and phosphate etc. can be used as a spray cleaning or dip tank applications for the removal of heavy grease and oils. 25 L, 200L WB- 1008 CHEMARA-TANKLEEN CHEMARA-Tankleen is a water soluble low foam degreaser used for degreasing and cleaning of a wide variety of surfaces and equipment. It is ideally suited for degreasing and cleaning of ISO cargo tanks. 25L, 200L WB- 1009 CHEMARA-ALKALINE CLEANER CHEMARA-ALKALINE CLEANER is a water soluble low foam degreaser used for degreasing and cleaning of engines, rigs, "off road" equipment, marine tanks, concrete floors and wall tires. WB1001/ CC1001 JANITOL PLUS Janitol Plus is Blend of anionic and nonionic surfactants and sequestering agents, water soluble alkaline multipurpose heavy duty degreaser for industrial cleaning and oilfield Rig washing applications. 25L, 200L WB1002 CHEMARA WB51 Chemara-WB51 is Water based Heavy Duty degreaser, blend of surfactants and non caustic alkaline detergents, and de rusters specifically formulated to melt away oily deposits from hard surfaces, Rigs and oilfield equipment. 25L, 200L WB1003 CHEMARA SLICK Chemara Slick is formulation of Alkaline detergents and water soluble solvents to remove the grease, paraffin, light oils and heavy oils. Used for cleaning of rig wash and equipment cleaning applications in the oil fields. 25L, 200L WB1004 CHEMARA-AC1100 Chemara-AC1100 is inhibited hydrochloric acid, used for scale removing applications. 1000L , IBC WB1005 CHEMARA-AC1101 Chemara-AC1101 is Sulfamic acid-powder chemical, used for descaling applications in various industries and power generation plants. 25 kg WB1006 CHEMARA-ALBRITE Chemara-ALBRITE is blend of inorganic acid and surfactants, specially designed for cleaning of aluminum metal surfaces. 25L ,200L WB-1007 CHEMARA-ALKLIN CHEMARA-ALKLIN is a heavy duty Alkaline degreaser developed to meet the heavy duty degreasing applications, for removal of grease, oil, dirt and phosphate etc. can be used as a spray cleaning or dip tank applications for the removal of heavy grease and oils. 25 L, 200L WB- 1008 CHEMARA-TANKLEEN CHEMARA-Tankleen is a water soluble low foam degreaser used for degreasing and cleaning of a wide variety of surfaces and equipment. It is ideally suited for degreasing and cleaning of ISO cargo tanks. 25L, 200L WB- 1009 CHEMARA-ALKALINE CLEANER CHEMARA-ALKALINE CLEANER is a water soluble low foam degreaser used for degreasing and cleaning of engines, rigs, "off road" equipment, marine tanks, concrete floors and wall tires.
Description Industrial Raw Materials are used for buffing, sanding, grinding, or polishing with other products such as Silica Flour, Limestone, Aggregate, Quicklime, Talc, Volcanic Rock and Calcium Carbonate. An abrasive is a material, often a mineral, that is used to shape or finish a workpiece through rubbing which leads to part of the workpiece being worn away by friction. While finishing a material often means polishing it to gain a smooth, reflective surface, the process can also involve roughening as in satin, matte or beaded finishes. As long as the abrasive itself is harder than the material you are trying to finish, an abrasive will be a very effective way of honing down any material to prepare it for use. Industrial Raw Materials Abrasives consist of minerals that can be either naturally-occurring or synthetic, such as calcite, emery, pumice, sandstone, garnet, borazon, ceramic, steel abrasive, and silicon carbide. When used for industrial applications such as mining, construction, railroad, and wholesale/retail operations, usage falls into several different categories: bonded, coated and others. A grinding wheel is a good example of a bonded abrasive, operated at very high speed to finish any material which is pressed against it. Sandpaper is the most commonly used coated abrasive, and is affixed to a backing material, such as paper or metal. While sandblasting a stream of Industrial Raw Materials Abrasives is thrown out on the surface of the workpiece to make it smooth or to remove the contaminants from the surface. Apart from this, these are used in automotive paints. Calcium carbonate is also an Abrasive that is used in toothpaste. In this particular application, hardness of the Abrasive is more than that of the contaminating agent but less than that of the tooth enamel. This helps in removing the bacterial plague without damaging the tooth enamel. Abrasives are also used in the processing of jewelry pieces.
Description Marble Powder Calcium Carbonate is considered the second purest source of calcium carbonate in nature, where the percentage of calcium carbonate reaches 97% CaCo3. After the stage of mining and extracting raw marble from our quarries in the Kingdom, it is crushed in our crushers to get marble chips. Then sorting it from impurities, sifting it, and grinding it to get marble powder called calcium carbonate. It is used in many industries after being sifted and classified in our factories. It can also be used to equalize the pH to reach PH7 in water treatment projects. It contains more than 19.5% of magnesium oxide and more than 29% of calcium oxide. It is less than 0.3% of silicon oxide, less than 0.7% of alumina oxide, and less than 0.1% of iron oxide, (or less than 0.03-0.04% of iron oxide for unpainted glass). Dolomite marble powder is added in sizes from 100-250 microns. In the coating industry (paints), marble powder calcium carbonate is an essential material, as it forms from 30 - 40% of the paint components and is preferred over calcium carbonate powder due to its crystalline nature. The powder is included in the process of manufacturing paint as a filler to improve some of the paint's natural properties such as thermal resistance, thermal conductivity, density, controlling viscosity, preventing flow, reducing oil absorption, and increasing hardness, by combining it with particles of colored or adhesive materials to form a cohesive and stable material with a high flow. The granular size of the powder should not exceed 20 microns. Some of the paints used in exterior wall cladding require marble powder in sizes 0.3 to 1.2 mm. In the plastics industry, marble powder is used as a basic material in the manufacture of many plastic products such as water and drainage pipes, electrical cables, some parts of electrical equipment, some auto parts, children toys, plastic bags, tableware food preservatives and dishes, decorations, and others. It improves the physical properties of the plastic product, it makes it resistant to deformation as it increases its hardness and resistance by increasing the modulus of elasticity. It reduces the thermal expansion coefficient, makes it have a good external appearance and soft touch, and keeps it from sloughing. In addition, it makes it easy to form by increasing its fluidity and dispersion and reducing production costs.
Description Industrial Raw Quicklime Mineral also known as calcium oxide CaO is a term commonly applied to several related materials. Pure lime is calcium oxide CaO formed by burning a form of calcium carbonate such as limestone or marble CaCO3. Calcium oxide is a key ingredient for the process of making cement. As a cheap and widely available alkali. About 50% of the total quicklime production is converted to calcium hydroxide before use. Both quick- and hydrated lime are used in the treatment of drinking water. Quicklime is used as Industrial Raw Materials with other industrial raw material products such as Silica Flour, Limestone, Aggregate, Talc, Volcanic Rock, Abrasives and Calcium Carbonate. The quicklime products are often ground into a fine powder referred to as PULVERIZED QUICKLIME that is ideal for mixing with additives or other materials to result in specialized blended composites. Due to the chemical nature of some additives, the quicklime can become Fluidized, that is, having properties of being highly fluid. The fluidized quicklime is ideal for use with special material handling systems for optimum flowability and to avoid clogging. Quicklime can also be hydrated with water, in a process commonly referred to as slaking, resulting in HYDRATED QUICKLIME (or calcium hydroxide), a dry free-flowing powder product that is practical and efficient for many uses. The relationship of quicklime and hydrated lime The word lime is also used to refer to calcium hydroxide and its chemical formula is Ca (OH) 2, and it is formed by the reaction of calcium oxide also with water. Calcium hydroxide is also known as hydrated lime, or hydrogenated lime while calcium oxide is known as quicklime. Both articles are rules. There are a wide variety of uses for hydrated lime. It uses an auxiliary material for smelting in the production of iron. It is also used to purify aluminum, copper, and zinc, and remove the hardness of water by removing certain minerals from them. It also plays an important role in wastewater treatment. And we find many farmers spread lime in their fields to neutralize soil acidity. Homeowners also use it in their gardens to prevent algae growth. Lime helps hold soil in foundations of roads and runways. In the leather industry, it is used in tanneries to remove hair from animal hides. The mortar that is placed between the tiles or stones in the walls of buildings consists of a mixture of lime, sand, and water. It is also one of the most important components of gypsum, and one of the most important components of a type of cement called Portland cement.
