Find Verified Blood Pressure Monitors Suppliers, Manufacturers and Wholesalers

SC 1001 CHEMARA-S-FAST
Fast drying non flammable solvents use for
industrial and metal cleaning applications
25lit , 200lit
SC 1003/ CC1B
Chemara Industrial
degreaser solvent
High Flash Point (60-65 C) degreaser.
Formulated product of emulsifying
surfactants and hydrocarbon solvents
designed for specific cleaning of storage
tanks, surfaces, barges, ship bulk tanks and
heavy crude cleaning applications.
20lit, 200lit
SC1004/ CC1B
Chemara EMULSIFYING
COLD CLEANER
High flash point(80 – 90 C) emulsifying cold
cleaner is a formulated product of
emulsifying surfactants and hydrocarbon
solvents designed for specific cleaning of
storage tanks, surfaces, barges, ship bulk
tanks and heavy crude cleaning
applications.
208 LIT
SC1005 CHEMARA CLEAN
Nonflammable and noncorrosive solvent
degreaser formulation and It is designed
for a variety of cleaning applications and
will effectively remove grease, tar, oil and
wax. It is used to clean electrical motors,
switch gears.
25Lit, 200Lit
SC1006 CHEMARA-SOL
Solvent degreaser used for cleaning of oily
surfaces, metals, equipments and engines
and automobile spare parts.
25lit , 200lit
SC1007 CHEMARA-BRON
Special solvent degreaser, biodegradable
environmental friendly and alternative of
chlorinated solvent degreasers. Used for
cleaning of metal surfaces, electrical
devices, equipments and all industrial
applications.
25lit, 200lit
SC1008 CHEMARA FLUSH OIL
Specially formulated aromatic solvent for
cleaning of extruder nozzles eg:
petrochemical industries.
25 lit and
200lit
WSP1001
Chemara 1CS20R-9503
(Catalyzed Sodium
Sulfite)
Chemara-1CS20R-9503 is a catalyzed
sodium sulfite based oxygen scavenger
designed to protect low to medium
pressure boiler systems against oxygen
induced corrosion from the feed water



SC 1001 CHEMARA-S-FAST
Fast drying non flammable solvents use for
industrial and metal cleaning applications
25lit , 200lit
SC 1003/ CC1B
Chemara Industrial
degreaser solvent
High Flash Point (60-65 C) degreaser.
Formulated product of emulsifying
surfactants and hydrocarbon solvents
designed for specific cleaning of storage
tanks, surfaces, barges, ship bulk tanks and
heavy crude cleaning applications.
20lit, 200lit
SC1004/ CC1B
Chemara EMULSIFYING
COLD CLEANER
High flash point(80 – 90 C) emulsifying cold
cleaner is a formulated product of
emulsifying surfactants and hydrocarbon
solvents designed for specific cleaning of
storage tanks, surfaces, barges, ship bulk
tanks and heavy crude cleaning
applications.
208 LIT
SC1005 CHEMARA CLEAN
Nonflammable and noncorrosive solvent
degreaser formulation and It is designed
for a variety of cleaning applications and
will effectively remove grease, tar, oil and
wax. It is used to clean electrical motors,
switch gears.
25Lit, 200Lit
SC1006 CHEMARA-SOL
Solvent degreaser used for cleaning of oily
surfaces, metals, equipments and engines
and automobile spare parts.
25lit , 200lit
SC1007 CHEMARA-BRON
Special solvent degreaser, biodegradable
environmental friendly and alternative of
chlorinated solvent degreasers. Used for
cleaning of metal surfaces, electrical
devices, equipments and all industrial
applications.
25lit, 200lit
SC1008 CHEMARA FLUSH OIL
Specially formulated aromatic solvent for
cleaning of extruder nozzles eg:
petrochemical industries.
25 lit and
200lit
WSP1001
Chemara 1CS20R-9503
(Catalyzed Sodium
Sulfite)
Chemara-1CS20R-9503 is a catalyzed
sodium sulfite based oxygen scavenger
designed to protect low to medium
pressure boiler systems against oxygen
induced corrosion from the feed water

Sand blasting sand
Materials which can be Sandblasted:

Sandblasting Process
Glass
Stone
Metals
Wood
Plastics Steel
Brass
Aluminum
Silver
Materials Required for Sandblasting Process:

Abrasive Media grit size 80 grit around 0.007
Sand Produces free silica: cause of silicosis, a lung disease
Aluminum OxideLasts 30-40 X over sand.
Silicon Carbide Lasts at least 40-50X over sand.
Garnet
Glass Beads
Black Magic
Walnut Shells
Plastic Pellets

Description
Sandblasting is also known as abrasive blasting. Basically, it is the operation of forcibly propelling a stream of abrasive material against a surface. The sandblasting operation is done under high pressure to smooth a rough surface, roughen a smooth/Shape the surface to remove its contaminants. There are several variants of sandblasting process like bead blasting, Soda blasting and shot blasting. Before sandblasting, it is mandatory to know about its materials and the pros and cons. If your job profile is related to sandblasting or you owned a company that involved in the same process, you need to stay with us. In this article, we will discuss sand blasting machines materials and its pros and corns. But before it, let me also clear some of the details of its operation.

There are Two Types of Sandblasting Processes:

Water-Driven It is applied for reducing surface deterioration, most commonly water driven process is used for brick or concrete surfaces preparation.

Air-Driven This process is best suited for metal surfaces, to prevent moisture buildup and avoid water intrusion in the surface.

Sandblasting is the process of propelling abrasive by using the pressurized liquid or compressed gas as propellant. There are many generic terms for this process that is generally related to the sandblasting abrasive media used for this process. Here are the details of abrasive materials.

Frac Sand
What Is Fracking?

Fracking. We have heard the term, but do we know what it means Fracking is short for hydraulic fracturing. It's a method of extracting natural gas and oil from shale deposits deep within the earth. Water, chemicals, and sand are pumped into these shale deposits under very high pressure which causes the shale to fracture, releasing the natural gas and oil trapped within. The slurry of water, chemicals, gas, and oil are then slowly pumped back out, leaving the sand to hold the fractures open so the mixture can be removed. As the slurry of chemicals, water, sand, gas and oil is pumped back out of the ground, it is separated into its different components and stored in tanks.

Description
Frac sand gets its name from its use in hydraulic fracturing (fracking), a completion method used by oil and natural gas companies to produce natural gas, natural gas liquids, and oil from unconventional, low permeability reservoirs such as shale.

It is a high-purity quartz sand with very round grains. It is very durable and provides a crush-resistant material used in oil and gas industries for hydraulic fracturing (also called fracking).

Proppants used in the petroleum industry must meet very demanding specifications. The typical characteristics of high quality frac sand include:

High-purity silica sand a grain size that is perfectly matched to job requirements a round shape that allows it to be carried in hydraulic fracturing fluid with little turbulence durability to resist the crushing forces of closing fractures.
It comes in various sizes. It can be as small as 0.1 millimeter in diameter to over 2 millimeters in diameter. Most frac sand used in oil and gas industries are between 0.4 and 0.8 millimeters in size.

Why Frac Sand Makes a Good Proppant?

After the surface pumps are turned off, the fractures contract but do not close completely because they are propped open by billions of grains of it. This occurs when there is sufficient sand remaining in the rock to resist the force of the closing fractures.

Description
Marble Chips are metamorphic rocks formed by the alteration of limestone by heat and pressure. In its pure form, marble is a white stone with a
crystalline and sugary appearance, consisting of calcium carbonate CaCO3. Usually, marble contains other minerals, including quartz, graphite, pyrite, and iron oxides. It is used for its chemical properties in pharmaceuticals and agriculture. It is used for its optical properties in cosmetics, paint, and paper. They are used as Industrial Raw Materials with other industrial raw material products such as Silica Flour, Limestone, Aggregate, Quicklime, Talc, Volcanic Rock and Abrasives.

Marble is usually a light-colored rock. It is one of the most effective acid-neutralization materials. Being composed of calcite, marble has a hardness of three on the Mohs hardness scale. As a result, marble is easy to carve, and that makes it useful for producing sculptures and ornamental objects. After being sanded with progressively finer abrasives, marble can be polished to a high luster. This allows attractive pieces of marble to be cut, polished, and used as floor tiles, architectural panels, facing stone, window sills, stair treads, columns, and many other pieces of decorative stone. Marble chips work best when used in paths and patios as a substitute for gravel. Although gravel often is used as inorganic mulch around plants, marble chip mulch's reflected sunlight can be too intense for plants in full-sun locations. Today, marble is quarried all around the world and is used to create giant monuments, it is used in building, even down to applications as simple as kitchen counter tops. Itâ??s classified as a metamorphic stone, which means that it has changed composition over time from one type of rock to another.
Also used in:

Building Stone
Countertops and sinks
Floor tiles
Terrazzo marble chips mixed with concrete to form floors.
Tomb Stone