With prepainted steel sheets on both sides and foam of 40 kgs/cum density.
Our company is providing eps panels that are insulated applications, which are food processing areas, roofing, wall cladding, partition, walk on ceilings, prefabricated shelters, accommodation shelters, health centers and many more. The panels are manufactured through a computerized continuous line and with pre-painted galvanized steel sheets (ppgs) and pre painted galvalume steel sheets. The density of expanded polystyrene foam (eps) sandwiched between two fascias is 8-30 kg/ m3. Construction pre-engineered & fewer components, internationally accepted & meets the building code Higher energy savings due to low thermal conductivity Flexibility in design and choosing various options on fascia of panels & colors All weather proof construction & maintenance free Modular in nature and pre-engineered for precision and simplified construction Options available with various finishes like ppgs / ppgs and ppgl / ppgl Walls of different height, yet sturdy and strong construction Light weight panels which is easy to lift and erect at any height inside the plant or any other place Frameless construction and ease of design, supply and erect for any types of construction Insulated panels and saves the energy These insulated panels gives long lasting value with controlled quality Accuracy & speed of construction and caters for better functionality & application
1.Total Thickness:16mm/18mm/20mm/25mm/50mm 2.Surface material:galvanized steel plate-0.25mm / 0.27mm 3.Mid content material:polyurethane sandwich foam 4.Back material:aluminum foil cloth
Vacuum insulated panel (VIP) VIP in English is the short form for vacuum insulated panel. It is one of the insulated materials, composed of the core filling materials with vacuum protection surface layer compound together. It effectively avoids air convection caused by heat transfer, therefore coefficient of thermal conductivity can be greatly reduced, less than 0.0025 w/m.k, and it does not contain any OD (Ozone Depleting Substances) material with the characteristics of environmental protection and energy saving. By present VIP is the world's most advanced material of the efficient heat preservation. Vacuum insulated panel (VIP) is the most advanced material in contemporary world for refrigeration, freezing, insulation and fireproofing, architectural building etc.
Vacuum insulated panel (VIP) http://www.pvd-metallizer.com VIP in English is the short form for vacuum insulated panel. It is one of the insulated materials, composed of the core filling materials with vacuum protection surface layer compound together. It effectively avoids air convection caused by heat transfer, therefore coefficient of thermal conductivity can be greatly reduced, less than 0.0025 w/m.k, and it does not contain any OD (Ozone Depleting Substances) material with the characteristics of environmental protection and energy saving. By present VIP is the world's most advanced material of the efficient heat preservation. Vacuum insulated panel (VIP) is the most advanced material in contemporary world for refrigeration, freezing, insulation and fireproofing, architectural building etc.
These are versatile, high tech and vacuum insulated panels utilised in insulating building. The main focussed areas are 1. Pitched roof or flat roof or terrace. 2. Interior walls or facades. 3. Floors 4. Thermal bridges. Technical details 1. Thermal coductivity 00.0042 w/mk. 2. High thermal resistance r value of 3.28 m2k/w at 20 mm thickness. 3. Heat resistance upto 80 deg c. 4. Moisture resistance upto 60%. 5. Non combustible, 6. No harmful respirable fibers. For more details please find attached catalogue 1200mm x 600mm x 25mm
Vacuum insulating panel can be widely use in fridge, freezer, refrigerator, refrigerated containers, ice thermal insulation systems of chamfer of adiabatic heat preservation material. The core materials through maximize internal vacuum to isolate heat conduction, achieve the goal of energy saving; heat preservation, it is the heat preservation material upgrades, change a product, realized the heat preservation material thickness is reduced by half, energy-saving province electricity half of the effect. Currently vacuum insulating board is mainly used in refrigerator fields, have energy-saving, wall thin and effective volume big advantages. Meet the future development banned cfc insulation product revolutionary requirements. It meets the future development banned cfc insulation product revolutionary requirements. Custom packaging
Vaccum Insulation Boards (Fumed Silica). It is widely used on refrigeration and building. The dimension is according to customer requirements. The application temperature is 70 and -40.
1. Thickness : 50mm 2. Width : 1m 3. Length : 11.8m 4. Color : customized 5. Both side : ppgi 6. Pu foam density : 30kg/m3 7. Ppgi thickness : 0.5mm
GOOT Vacuum Insulation Panel (VIP) is a new highly-efficient thermal insulation material which was developed in 2006. The VIP s are constructed using a special technique by inserting the open-celled filler into a centralized sealed barrier. Using the core material which provides the structural strength and resistance for heat transfer makes the VIP extremely efficient in low thermal conductivity that has less than 0.005w/m.k. The VIP has been proven to exceed its performance than the conventional insulations by far. Vacuum Insulation panels are our new high- efficient thermal insulation. It is created by inserting the open celled filler into a centralized sealed barrier. The core material provides the structural strength and resistance to heat transfer. Applications: Cold insulated equipments of different industries Shipping containers Spaceflight/ Aviation Communication/ transportation Medical Refrigerators and freezers Marine and recreational refrigeration vehicles Civil refrigeration equipment Insulation for construction Advantages: 7- 10 times better insulation value then conventional insulations Thin wall, small volume, lightweight Extremely low thermal conductivity 0.005w/m.k Resistance to heat transfer among the gas molecules Non-ODS material Not harmful for the environment Meets all insulating requirements Specification: 1) Compressive Strength: 0.14MPa - 0.25MPa 2) Thickness: 10 - 35mm 3) Maximum Dimensions: 1600 x 700 x 35mm 4) Core Material: Superfine fibreglass 5) Thermal Conductivity: less than 4mw/m.k(under standard environmental condition: ambient temperature 24 C, relative humidity 50%) 6) Density: about 230kg/m3 7) Internal Pressure: 0.1Pa 8) Operating Ambient: -50 ~ 70 centi degree 9) External Tolerance of VIP: 1mm 10) Packing: carton with foam and air bubble film 11) Service life: 10-15 years under standard environmental condition 600*400*10mm, paper carton packing
Vokesi®HVIP is a micro porous thermal insulation panel with excellent insulating properties. The core material of Vokesi®HVIP is fumed Silica.It's sealed with an air barrier film under vacuum.The thermal conductivity
Thickness: 20mm Density: 52 kg/m3 ¡¨¤ 3% Panel diameter: 4000mm x 1200mm Thermal conductivity: 0.020 -0.21w/mk Aluminum foil: 80 |¨¬m both sides Aluminum finish: embossed Fire and smoke classification: non-combustible class ¡¡ãa¡¡à Carton
Phenolic foam pre-insulated ducting panel compounded with aluminum foil is of high strength, which takes phenolic foam as the core material with reinforcing the aluminum foil on both sides. Its a kind of noncombustible material which gives off no smoke and no poisonous gas when exposing to fire. Its bending strenght reaches over 1mpa and the thermal conductivity index 0.020w/mk. The phenolic foam can be fabricated into all kinds of rectangular(bended) ducts by cutting and adhesive connecting, then can be assembled into the air ducts of different Specifications by using the fire-proof flange and adhesive. Its widely used for the ventilation systems of central air conditioning units in hotels, apartments, hospitals, office buildings and other deluxe buildings. 3900*1200*20 12piece in one box and one 40ft container can load 3032.64 sqm
Dust Free Clean Room Handicraft Insulated Sandwich Panel Characteristics: clean room handmade sandwich panel has high corrosion resistance, as it uses PET color coating steel sheet as surface (galvanized steel sheet, stainless steel sheet, aluminium can be other options ). Core material is either fire proof materials or fire retardant materials, which will be neither melt nor breakdown droppings when burning. Handmade sandwich panel is an excellent composite building materials for construction and decoration till now, with its high strength, high impact-resistant, earthquake-resistant, and convenient assemble. SPECIFICATION Regular thickness: 50mm, 75mm, 100mm Regular width: 980mm, 1180mm (non standard width can be from 300mm ~ 1180mm) Regular length: 1000mm ~ 6000mm (it depends on projects�?? demand and the container limit ) Applicable core materials: magnesium, rock wool, glass wool, polyurethane (PU) and polystyrene (EPS) etc. �??Installation structure : connected by aluminium profile PRODUCT INQUIRY Price term: EXW, FOB, CNF, CIF Payment term: T/T, L/C Production time : within 15 days after order confirmed. Order quantity: MOQ 300 SQM Container Loading: rough 1000 SQM/40HQ Packing way : bulk pack, standard wooden pallet, wooden case or as request APPLICATION FIELD Applicable field : it is widely used as wall panels or ceiling panels for clean room projects or construction buildings like hospitals, clinics, food factory, pharmaceutical factory, eletronics factory, chemicals workshop, beverage factory, lab, purification field and so on.
Thickness: 20mm Density: 52 kg/m3 ¡¨¤ 3% Panel diameter: 4000mm x 1200mm Thermal conductivity: 0.020 -0.21w/mk Aluminum foil: 80 |¨¬m both sides Aluminum finish: embossed Fire and smoke classification: non-combustible class ¡¡ãa¡¡à Carton
Thickness: 20mm Density: 52 kg/m3 ¡¨¤ 3% Panel diameter: 4000mm x 1200mm Thermal conductivity: 0.020 -0.21w/mk Aluminum foil: 80 |¨¬m both sides Aluminum finish: embossed Fire and smoke classification: non-combustible class ¡¡ãa¡¡à Carton
Horizontal continuous production line for VIP vacuum insulated panel Our company produces various models of production line for vacuum insulated panel (VIP) as per customerâ??s technical requirements, enabling to meet their actual demands. Model XF2000-V/S production line for VIP/STP vacuum insulated panel with structure of the world's first horizontal continuous production line, with features of stable good quality and high efficiency, is an exclusive one in the world and it can achieve the capacity of 8 pieces per minute of VIP/STP panels sized 600X400X65mm.(Specifications of VIP/STP panels can be made as per customers specific demands and requirements. The maximum VIP/STP panel size 1500mmX2000mmX55mm.). Vacuum insulated panel (referred to as VIP in short form) is a newly developed efficient insulation material in recent years with very low thermal conductivity. Its structure consists of 3 parts as insulation material in the core, gas collecting material called Getter and membrane walls used to prevent air from entering the panel called Barrier. It is made by the principle of vacuum insulation through powerful evacuation with vacuum pumps to realize the maximum internal vacuum pressure to prevent heat conduction, which can effectively avoid the three ways as conduction, convection and radiation to achieve insulation and energy-saving purposes. Vacuum insulated panel, one of the vacuum insulation material with low thermal conductivity and excellent properties of thermal insulation and environmental protection, is currently the world's most efficient insulation products. It is a perfect substitute for traditional insulation material and products, extensively used in refrigerators, freezers, water heaters, refrigerated containers, building materials for facades or exterior walls. Its thermal conductivity can be achieved less than 1.5mw/m.k.
"ISO" in the context of polyisocyanurate insulation typically refers to the insulation material's type or category rather than an acronym. Polyisocyanurate is a type of rigid foam insulation known for its high thermal resistance (R-value) and effectiveness in providing thermal insulation.
XPS Insulation (Extruded Polystyrene): "XPS" commonly refers to extruded polystyrene insulation. This type of insulation is known for its closed-cell structure, providing good thermal resistance and moisture resistance. It is often used in various construction applications, such as insulating walls, roofs, and foundations. B1 Fire Rating: The "B1" component might refer to a fire rating. In some fire classification systems, materials are rated based on their fire resistance, and "B1" could indicate a certain level of fire resistance. For example, in the European fire classification system (Euroclass), B1 represents a material with limited combustibility.
AL FOIL, FOAM, PET, Glass fiber cloths etc. Building insulation lamination
