The door interlocking system is used to control the entry of a person to a secure area such as a clean room, research lab, etc. where dust or small particles may be a problem or security is of high concern. In its simplest form, the door interlocking is composed of 2 doors that are electrically interlocked in such a way that the doors cannot be opened simultaneously. Another example of Door Interlocking is Man trap The 8 Door Interlocking Terminal can handle up to 8 doors ( 16 IN/OUT switches ).Thus logic can be built up around the number maximum number of doors ( 8 ) i.e. the manner in which they need to open or close. The Pass-through authorization is validated by a switch or the DIT can operate in a switch-less mode. Spectra’s DIT800 from the Enclava series caters to this requirement of 8 Door Interlocking. Features: • Door Interlocking with Buzzer and Led indicator: Door Interlocking Terminal (DIT) controls interlocking of doors 8 doors using DOTL signals. For user interface there is one switch at entry and EXIT side of a door. Buzzer and LED indicators are used to provide users with visual feedback as to when a door may be accessed. For user convenience, a green light is typically used to signify that a door is ready for access and a red light to indicate that a door is un-accessible. (Additional capability providing Digital outputs which may be utilized for up to 4 more relays controlled by the DIT) • Operations: Only one door may be unlocked or open at one time. Unlocking or opening one door automatically secures all other doors within the designated area. Lock relay contacts will allow low voltage red and green LEDs to be utilized for user feedback. • Programmable: Door interlocking groups can be programmed for 8 doors. User can program interlocking groups through serial communication. • Supports switch less operation: DIT can be used without switch in which led will indicates that user can open the door or not. Switch less operation is same as with switch except that all locks will remain open initially and will get closed if one of the doors of interlocking group is open. Advantages: • Easy to install and configure • Switchless operation • Cost saving For more feel free to reach out to us in case any clarification is required. Resilient Technologies M. No. - +91 9810995267 Visit on: www.resilienttec.com Corporate office: 578 | UdyogVihar Phase V | Gurgaon – 122001 Branch office: 465 | Pocket E-16 | Rohini | New Delhi – 110085
Metrial:HDPE&PET.1.8*6m,2.0*6m also as your requairement iso9001 sgs ,4kg
Please contact us for further information Please contact us for further information
Please contact us for further information Please contact us for further information
Automatic Optical Turnstile Factory Optical turnstile Main Functions: (1) Optical turnstile Easy to install, use and maintain. (2) When power off, the barrier arms will keep open (for safety). (3) Infrared sensor function. (4) Optical turnstile can be integrated with magnetic card, barcode scanner, counter, swallow machine, token accepter, and fingerprint machine and so on by standard electrical interface. Optical turnstile Specifications Sheet: Automatic Optical Turnstile Factory Item: Description: Material: 304 S/S, Arm- Plexiglas Thickness of Ply: 1.2mm (Standard) Dimensions: (L)1200* (W)280 *(H)990 (mm) Finishing: Brushed (Standard) / Fingerprint processing Pass width: 550mm Weight: 80Kg Operation direction: Single direction / Bi-direction Power Voltage: AC220V +/- 10V 50Hz AC110V +/- 10V 60Hz Optical turnstile Specific Function: (1) Optical turnstile alarms automatically if someone passed illegally. (2) The whole system runs smoothly, low noise, no mechanical impact. (3) If someone stands in the lane, the optical turnstile will not pen even the card reader gives relay signal to the barrier. (4) Anti-trailing function, the barrier will lock if someone wants to burst in without swiping the card. (5) When power off, Optical turnstile arms will open automatically, to meet the special needs of users and fire safety requirements. (6) Infrared sense to prevent pinch pedestrians. (7) Standard communication interface, can connect with most of access control parts, also can control and manage wireless by computer. (8) When connect the access control system, you can know how many person through the machine by computer directly. (9) Passing direction will be shown by LED and passengers will know which direction is allowed to pass. (10) By software, the people who can pass through or not can be set to meet special request. (11) Automatic reset function. When the Optical turnstile receives an open single, but passenger do not pass through the Optical turnstile hallway within a specific time (Default 5s), machine arm will lock again. Limit passing time can be set. (12) ISO 9001 Quality Assurance and CE certification. Automatic Optical Turnstile Factory Infrared sensor Function: (1) Anti-pinch function: When people stand in the middle lane, Flap Arm will not close. (2) Illegal intrusion alarm function: When people illegal to pass, Flap will alarm automatically (3) Reverse intrusion closing function: When you swiped card if another people pass from the reverse side, Flap Arm will automatically close. (4)Anti-Trailing function: If someone wants to trail with you without swiped the card, Flap Arm will be locked automatically. Optical turnstile Applications: Amusement Park Airport Buildings offices Enterprises Exhibition centers Entertainment centers Industrial Living garden Museums Railways Stadium Seaports Ski resorts Schools Shops Supermarkets Subway Public Park Water Park And so on Contact info: Company Name: Daosafe Technology Co., Ltd. Export Standard Wooden Package
Access Control System Tripod Turnstile Gate Tripod Turnstile Main Functions: (1) Tripod Turnstile Easy to install, use and maintain. (2) Tripod Turnstile direction can be set as single-direction or bi-direction. (3) Arms auto drop when power off, complying with fire safety requirements. (4) Tripod Turnstile can be integrated with magnetic card, barcode scanner, counter, swallow machine, token accepter, and fingerprint machine and so on by standard electrical interface. Tripod Turnstile Specifications Sheet: Item: Description: Framework: 304 (Standard). Thickness of Ply: 1.2mm (Standard). Dimensions: (L)1200* (W)280 *(H)990 (mm) Finishing: Brushed (Standard) / Fingerprint processing Pass width: ¡¡¡ì1500mm (Can be customized)) Weight: 55Kg Operation direction: Single direction / Bi-direction Power Voltage: AC220V +/- 10V 50Hz AC110V +/- 10V 60Hz Work Environment: Indoor / Outdoor Pass rate: 35person/ minute Power Consumption: 20W/24V Operating Temp.: -15oC ~ 60oC Operating Humidity: 0 ~ 95% without concretion Emergency: Automatic arm drop down Input: 12v dry contact Access Control System Tripod Turnstile Gate Tripod Turnstile Specific Function: (1) Electromagnet lock, photoelectric unlock, long service life, High operation dependability and fast response. (2) The whole system runs smoothly, low noise, no mechanical impact. (3) Tripod Turnstile Self-test function, when power on, system restoration automatic. (4) Tripod Turnstile working modes selectable: bi-direction card reading; One direction cards reading and another no reading; one direction card reading and another freely. Working modes can be set in the control panel. (5) When power off, Tripod Turnstile arms will drop automatically, to meet the special needs of users and fire safety requirements. While power on later, arm should be lift by hand. (6) Tripod Turnstile easy integrate with computer to control and manage hallway access. (7) When connect the access control system, you can know how many person through the machine by computer directly. (8) Tripod Turnstile passing direction will be shown by LED and passengers will know which direction is allowed to pass. (9) Card reading memory or card reading without memory function can be set in the control panel menu according to your request. (10) By software, the people who can pass through or not can be set to meet special request. (11) Automatic reset function. When the Tripod Turnstile receives an open single, but passenger do not pass through the Tripod Turnstile hallway within a specific time (Default 5s), machine arm will lock again. Limit passing time can be set. (12) ISO 9001 Quality Assurance and CE certification. Access Control System Tripod Turnstile Gate Tripod Turnstile Applications Amusement Park Airport Buildings offices Enterprises Exhibition centers Entertainment centers Industrial Living garden Museums Railways Stadium Seaports Ski resorts Schools Shops Supermarkets Public Park Water Park And so on Contact info: Company Name: Daosafe Technology Co., Ltd. Export Standard Wooden Package
8 antennas high power gps/ wifi/ 315/ 433 jammer Cdma800: 850-960mhz, gsm1800: 1805-1880mhz (dcs), gsm1900: 1920-1990mhz (pcs), 3g: 2110-2170mhz, gps: 1570-1580mhz, wifi 2.4g: 2400-2500mhz, 315: 315mhz, 433: 433mhz Total output power: 20w power supply: 50-60hz, 100-240v ac Jamming range: up to 70m, the jamming radius still depends on the strength signal in given area Dimension: 370x 140 x 51mm Full set weight: 4.0kg Nutral package
8 antennas high power lojack/ wifi/ vhf/ uhf jammer Cdma800: 850-960mhz, gsm1800: 1805-1880mhz (dcs), gsm1900: 1920-1990mhz (pcs), 3g: 2110-2170mhz, lojack: 167-175mhz, wifi 2.4g: 2400-2500mhz, vhf: 135-174mhz, uhf: 400-470mhz Total output power: 20w power supply: 50-60hz, 100-240v ac Jamming range: up to 70m, the jamming radius still depends on the strength signal in given area Dimension: 370x 140 x 51mm Full set weight: 4.0kg Nutral package
6 antennas high power portable 3g/ wifi/ gpsl1 jammer ( with dip switch) Cdma: 850-894mhz, gsm: 925-960mhz, dcs/pcs:1805-1990mhz, 3g: 2110-2170mhz, wi-fi: 2400-2500mhz, gpsl1: 1500-1600mhz Output power: 3w power supply: 50-60hz, 100-240v ac Jamming range: up to 20m, the jamming radius depends on the strength signal in given area Deminsion: 133x75x35mm, not include antennas Full set weight: 0.95kg Nutral package
Color:Silver Rated voltage:DC6V Card reading distance:0-20mm Undervoltage alarm:4.4V +/- 0.2V Operating frequency:13.56MHZ Door thickness:40-50mm Size:246mm*77mm*179mm Weight:3500g The lock core:International standard 5 bolt structure Apply range:hotels,office buildings,residential buildings,and so on Size:246mm*77mm*179mm Weight:3500g
Power supply 6~36V DC Battery capacity 465mAh GSM bands 850/900/1800/1900MHz Standby current
Product description 1. Material: carbon steel. 2.Valve:1/2" corrosion-resistant brass galvanized ball valve. 3. Water supply: 1/2" ips. 4. Water outlet: 5/4" ips. 5. Flow control: 9-11l/min. 6. Hydraulic pressure: 0.2mpa-0.6mpa. 7. Original water: clean or leached water. 8. Operation condition: eye wash & shower option for almost every industrial situation. 1/pcs in wooden cartoon
1. Valve: 1/2" corrosion-resistant brass galvanized ball valve. 2. Water supply: 1/2" ips. 3. Water outlet: 5/4 ips. 4. Flow control: 9-11 l/min. 5. Hydraulic pressure: 0.2-0.6 mpa. 6. Original water: clean or leached water. 7. Operation condition: eye wash & shower option for almost every industrial situation. For metal eyewash, the foot control is optional as request. 1/pcs in wooden carton
1. Head: 10" abs in safety yellow head. 2. Valve: shower valve is made of the 1" corrosion-resistant brass galvanized ball valve. Eyewash valve is made of the 1/2" corrosion-resistant brass galvanized ball valve. 3. Water supply and outlet: 5/4" ips. 4. Flow control: 114l/min. 5. Hydraulic pressure: 0.2mpa-0.8mpa. 6. Original water: clean or leached water. 7. Operation condition: eye wash & shower option for almost every industrial situation. 1/pc in wooden carton
Bd-580a is an outdoor freeze-resistant eye wash/shower for emergency aid and first treatment with water tank, which can be used in the areas from -40 , the water tank is made of stainless steel with electric heating storage tank system, the water volume is 350l, but can be made it according to customer's request. It is mainly composed of pipe (ss304 or carbon steel), heating tape, inner heat layer, outside heat layer. 1. Head: 10" abs in safety yellow head. 2. Valve: shower valve is made of the 1" corrosion-resistant ss304 ball valve. Eyewash valve is made of the 1/2" corrosion-resistant ss304 ball valve. 3. Water supply and outlet: 1" ips. Water outlet: 5/4" ips. 4. Flow control: 114l/min. Hydraulic pressure: 0.2mpa-0.8mpa. 5. Voltage:220v-250v. 6. Original water: clean or leached water. 7. Operation condition: eyewash & shower option for almost every industrial situation. 8. Notification of operation: it can be used in explosion proof area and inflammable environment 1/pc in wooden carton
Bd-560d is an anti-freeze and automatic emptying stainless steel combination eyewash/shower to wash body and eyes. The water supply system can be used by foot pedal. When the washing is finished, you should leave from the foot plate, the water supply system will be closed and water in pipe will be emptied, result in anti-freezing function in the outside door in winter. 1. Head: 10" abs in safety yellow head. 2. Valve: water supply valve is made of the 1" ss304 triple ball valve. Shower valve is made of the 1" ss304 ball valve. Eyewash valve is made of the 1/2" ss304 ball valve. 3. Water supply and outlet: 1" ips. 4. Flow control: 114l/min. 5. Hydraulic pressure: 0.2mpa-0.8mpa. 6. Original water: clean or leached water. 7. Operation condition: eyewash & shower option for almost every industrial situation. 8. Notification of operation: use it in the lower polluted chemical environment. Please choose the ss316 when the acidity is too high. 1/pc in wooden cartoon
Our detector is equipped with power and 2-step led indicators, which provide clear information about power and alarm. The state-of-the-art sensing element is ul approved, which ensures the reliability of the detector. The various models provide different solutions to protect household from any possible damage which might be caused from gas applications. You can also have ags-4xx series detecting both co and lng for a complete protection. This product series is CE approved. 120*41(mm), 310g
Specially designed for ac power line protection against damaging high voltage surges from lightning & inductive switching. Providing protection for equipments or instruments whose power consumption is below 10a We provide a complete product series to protect different telecommunication or video signal transmission devices. Ars-004-s45 is perfect for internet equipments, ars-004-n11 can be applied to protect telephone, fax machine, xdsl or adsl devices, and ars-001-rxx is designed to protect surveillance camera and cable tv line. For this model, we inlcude several different options of connectors, f female, f male, bnc female or bnc male connector.
Technical Advantage 1 The System is made of communication command, electronic maps, video transmission, computer network, monitoring and management features,so that it can make real-time and continuous monitor,command and management of the moving objects on the land, sea and air 3D wide-area space, 2 The System uses advanced video image digital compression technology, can have a high-speed transmission of video images by wireless mobile communication channel 3 Optimized system integration management software, implement and improve the ability of decision support and command function in relevant field, improve the ability to respond quickly to incidents. Function: Video surveillance and voice intercom function Remote control function Alarm triggering the transfer Serial data acquisition and transmission GPS positioning and trajectory search The remote SMS sending and parameter configuration functions Specification Video Input: 1 channel analog video input Audio Input: 1 channel MIC input Audio output :Built-in speaker, support for external headphones Alarm Input: 1 channel alarm input, realize by alarm button GPS positioning: built-in GPS positioning module Local video / image capture:Support SD card storage, realize by video / capture button Local video display:Show Equipment management menu on screen, built-in LCD-TFT color display with a resolution of 320x240 OSD control menu 186;operate by Equipment management menu on the LCD screen Network Communication:wireless network communication, support the EVDO WCDMA,TDSCDMA WIFI Wireless LAN Communication :supports IEEE802.11b / g Local Wired Network Communications: Support 10/100M interface, with routing function USB Extension Supports external USB devices The Built-in Battery: 7.4V/2200mAh Rechargeable lithium battery Working time R4 hours Standby time: R10 hours Application Achieve and improve the rapid response capability of handling emergencies in the related areas ,play an important part in prevention and security. The National Security Office, Public security, armed police, fire control, civil defense, Offshore rescue, electrical, hydraulic, metallurgy, mining, petroleum, Chemical, construction, docks, inspection and quarantine, urban transport, highway regulatory and other important places. (At the same time,it can meet the demand of home, small business or industry-specific user monitoring applications) Model NO.:AN-81 Certificate: CE,RoHS SDK: Free Service: Pre and After Sale Service Export Markets: Global Trademark: OEM/ODM Packing: Carton Box Origin: Shenzhen China
Feature: compact and refined appearance, a sense of high-grade metal, easy to carry high recognition rateon the difficulty fingerprints wear-resistant, anti-shock destructive ... high success rate of logining fingerprint wide temperature range: suitable for particularly cold or particularly hot areas strong antistatic ability: dry sao easily from the static region is very suitable Specification Identification mode: a large area optical recognition acquisition window Frr0.01% Far0.0001% Identification speed:
