Certification: portable air foam spraying gun is in accordance with the IMO"international code for fire safety system. SOLAS 1974, as amended.In accordance with GB/T3571. Rated working pressure: 0.5Mpa working pressure: 0.3-0.7Mpa Mixed flow rate: 400L/min Water output: 400L/min Foam output: 1.5m3min Foam distribution: >15m
Introduction: Included the following items 1, Helmet 2. Clothes 3. Trouses 4. Belt 5. Fire proof Boot 6. Gloves Description strengthed the shoulder, elbow, knee. Hem with large pockets, pocket bottom corners have a water drain hole. Reflecting sign belt, seam, sleeve seam, batwing joints in main stitch are double needle, and using the Fang anti- temperature line. Cuff trousers, leather bags, waterproof rib cuffs, and a thumb ring buckle design, rib cuff material for aromatic fiber. Elastic belt use strong elastic rubber band. Garment fit, with high protection grade, ightweight non-removable integrated fire protective clothing Specifications 1. EN469 SRO fire-proof fabrics fire suit/firefighter suit for fireman 2.Application: Used for protection for firemen Clothing Construction: Jacket Material: Composite cloth with fire resistant layer, waterproof and breathable layer, heat protective layer, comfortable layer Reflective band; American 3M company Color: Purplish blue Characteristics: 1. Fire Resistance Performance: Damaged Lengthâ?¤ 10cm Continued Burning Timeâ?¤ 2s 2. TPP(heat protective performance)â?¥ 28cal/cm2 3. Weightâ?¤ 3.5kg/set 4. Breathable capacity â?¥ 5000g/square meter 24h 5. Anti-static water-pressure â?¥ 17000PA Material: Out: SRO fire-proof fabrics XBD(210±10.5)g/m2 Moisture Barrier: Non-woven Aramid + PTFE(105±10)g/m2 Thermal Barrier: Retardant Insulation Blankets 716# (150±20)g/m2 Pillow top: Cotton Muslin (120±12)g/m2 32*32 75*75 Dupont Reflective Strip Standard: EN469 ZGZ-ZPJY-001:2009 & GA10-2002
Size: 620*590*525mm Weight: 70kg Max power: 13hp Max capacity: 47.5t/h Presseure: more than 0.5mpa
Size: assorted Material: stainless steel / Q235
Coupling type: Nakajima Nominal diameter: 40mm, 50mm, 65mm Material: rubber, aluminum Suitable medium: water
DESCRIPTION Type: PP24C Service Pressure: 0.5-1.0MPa Max Service Pressure: 1.0mpa Spray Capacity: mixed liquids 24l/s, water24l/s Range: more than 40m Horizontal rotary: more than +- 180degrees Max angle of elevation: more than +- 70 degrees Max angle of depression: less than -60degrees Allowable error of discharge capacity: +- 8% Foaming times(at 20degree): more than 6 25% discharge time(at 20 degree): more than 2.5min Effluent capacity: 85T/H Connection Flang: DN80
Technical: ship-proof, stab-proof,acid and alkali-resistant
SCBA comply with IMO MSC.339.(91) resolution amendment "International Fire Safety System" (FSS code)
Product Attribute: Place of Origin: Taiwan More > Model/Item No.: AVH517 Brand: AVTECH Last
DESCRIPTION Introductions: 1.firefighting equipment Approval:ABS,CCS,BV,DNVetc 2.fire fighting equipment material :stainless steel 3.Capacity of fire monitor/fire pump : 160m3/h,180m3/h ,360m3/h ,600m3/h , 900m3/h , 1200m3/h , 3600m3/h ,etc 4.firefighting equipment Type:Supply external Fire Fighting Systems , FiFi1/4,FiFi1/2, FiFi 1, FiFi 2 , etc 5.Fire Fighting System Engine:Cummins Engine or the demands you need 6.Fire fighting equipment Include:fire pump,fire monitor,with diesel Engine 7.Firefighting equipment color:red Technical Parameters for Maritime Fire Fighting Fifi 3/ Firefighting 1 And 2 Firefighting Class System. 1.FiFi Class 2 System 7200m3/h Diesel Engine Driven Fire Pumps: 2X3600m3/h Fire Monitors:4X1800m3/h@150m, Remote Control System 2.FiFi Class 1 System 2400m3/h Diesel Engine Drivenor Electric Motor Driven Fire Pumps: 2X1200m3/h or one 2400m3/h Fire Monitors:2X1200m3/h@120m Remote Control System 3..FiFi 1/2 System Diesel Engine Driven or Electric Motor Driven Fire pumps: 1200m3/h Fire Monitors:2X600m3/h@120m or1X1200m3/h@120m Remote Control System 4.None Classed Fi-Fi System Diesel Engine Drivenor Electric Motor Driven Fire pumps:2X300m3/h@145m Fire Monitors:2X300m3/h@85m 5. None Classed Fi-Fi System 6.Fire Pump Unit, fire pumpCapacity: 4200m3/h,3600 m3/h, 2400 m 3/h, 1800 m3/h, 1200 m3/h, 600 m3/h, 300 m3/h,250 m3/h ,ect Certificate: CCS BV ABS DNV and other Class 7. Fire monitor Including fire water monitor , foam monitor , powder monitor with Electric/hydraulic romote control and hand whell REMARK:Designated the best solution for you,according to your requirements. Above just for your guidence. If you need this products For ship,pls provide the below information for external Fire Fighting Systems 1. Capacity of the Fire monitor for this Fire Fighting Systems (m3/h) 2. Fire pump Capacity for Fire Fighting Systems(m3/h) 3.Need the diesel Engine for fire pump 4.Any special brand demands for diesel fire pump engine Related pictures Maritime Fire Fighting Fifi 3/ Firefighting 1 And 2fir Firefighting Class System(fire monitor,fire pump,diesel engine for firefighting equipment)
Fire Extinguishing Ball is a fully automatic fire extinguisher. When throw into or rolling to fire, it will explode and make huge noise to catch everyone's attention nearby. You can also place it where the hot spots are such as flammable objects, circuit breaker box and gas tank. In case of fire, it will put out the fire by itself thus guarding lives and property. Features: * Reaction time: 3-5 seconds * Auto spray/manual * Everyone can be easy to use * High security * Environmental harmless dry powder and safe for users * No need to do regular inspection every year, the life span is 5 years Descriptions: * Product name: AFO fire extinguisher ball * AFO HS: 842410000 * Instruction: Fixed position by automatic fire sensor and/ or throw in fire area * Content: Environmental harmless dry powder * Automatic reaction time: 3-5 seconds * Effective extinguish area: 3 m3 * Validity: 5 years * Shape: ball type * GW: 1.3~1.5kgs If you would like to get more information of fire extinguisher ball, fire extinguisher, fire ball, AFO; please contact us by email. All business inquires are replied within 24 hours. Welcome to order by OEM and ODM!
Fangzhan SCBA Features and BenefitsFangzhan combined proven concepts to develop a better SCBA - an SCBA that, after every design change, was taken back to firefighters like you for testing and to make sure it was right. The result of hundreds of hours of design, engineering, and testing: an innovative way to think about the SCBA, placing the firefighter at the center of the design process. Specifications,TypeOpen-circuit pressure demand self-contained breathing apparatus,Facepiece MaterialButyl rubber,Head HarnessSilicone or Kevlar,AlarmsBell, plain whistle or warbling whistle,Second Stage RegulatorPilot valve,Heads-Up DisplayLED style,Cylinder Pressures2216 or 4500 psig,Cylinder Durations30-, 45- or 60-minutesRecommended Industries/Use,Fire Protection,Forestry,Government,Military,Mining,Municipal Services,Nuclear,Oil and GasHazards,Airborne Particulates,Biohazard,Chemical,Confined Space,Contamination,Extreme Environment,Explosion,Fire,Gas, Vapors, Smoke,Welding FlashRegulations,EN136 EN137 ,MSC339 (91)
I.SummarizeAs individual protective equipment for personnel respiratory, , gas defence mask (Type:FZFD) canprotect the respiratory organ ,eyes and facial skin. Masks can be directly connected with the canister, or connect with the canisters with the airway. FZFD type gas mask can choose different sizes canisters according to the different protection requirements. Its used  for military, factories and mines, scientific research, ambulance, fire and other units.It meets the standard of GB2890-95.II.BodyThe body with an inner periphery and chin off the cover is made of black rubber molded ,which ensureadhesion with the face and comfortable to wear. This rubber is specially formulated to enhance the life of the mask and the skin without irritation. Easy to adjust the belt, it can quickly wear. Therefore, the gas mask can ensure airtight, and comfortable to wear in all cases, even when engaged in intense activity.III.Specification1. Protection objects: according to needs of different canisters,it can protect people from toxic gases, vapors and toxic smoke.2. Expiratory resistance: not more than 90 Pa (30 l / min)3. View: no less than 70% of the total field of vision, double vision is no less than 30%4. View Performance: when longer than 1.5 hours, without fogging the lens, without distortion anddeformation (-30 )5. Tightness:( Mist leak tightness factor): not more than 0.005%
Descriptioneebd is a compressed air emergency escape breathing device designed to offer easy donning, , combined with optimal respiratory protection. It is contained in a bag for carrying which, when opened, automatically triggers the supply of breathable air from the cylinder. Overpressure maintained inside the hood eliminates any risk of inhaling toxic gases. The hood is adjusted automatically thanks to the integrated inflatable air cushion on the back of the head. This system allows the hood to fit securely over the head, offering greater respiratory comfort and leaving the hands free during donning, ensuring the highest level of safety. An alarm whistle indicates when the air supply is about to run out. Supplied with 3L steel cylinderThe unexpected release of noxious gases, vapors, fumes or other toxic airborne materials cannot be absolutely eliminated from every industrial setting. Nevertheless, every industrial setting can be easily equipped with ELSA Emergency Escape Breathing Devices. Placed in strategic locations, EEBD provides exceptional breathing protection for emergency escape from those areas where hazardous conditions may suddenly occur.EMERGENCY ESCAPE BREATHING DEVICES Very Simple to operate starts automatically upon opening of bag Easy to rechargeable and reusable 15 minute versions available ISO23269 & EN1146ParametersModel: TH/15-1Duration: 15 minutesTotal dimensions: 590*250*175 mmWeight : 7.0KGApproval: ECÂ Product TypeRespiratory ProtectionRangeSCBA (Self Contained Breathing Apparatus)LineCompressed airline filtration systemsBrandFangzhanIndustryChemical IndustriesPetro-chemical
Forced air respirator (FZQZ-I) is safety equipment for the wearer to use in different fields such as industry, , agriculture, medical team and scientific research, military, police and civil defense. It conveys the filtered air from the turbo fan to the wearer.Full load working time: built-in lithium battery charge full :�1.5hInstall an external connection power supply for more than 6hExhalation resistance: �98Pa (30L / min);Air outlet flow: � 170 liters / min;Mask leakage coefficient: � 0.005%;LCD monitor direct observation of electricity: Alarm when the power is less than 10% ± 2%, while the alarm red light flashes.Rechargeable lithium battery inside before leaving factory. Optional installation of external power is available , such as customer requirements according to customer requirements.
The respirator is mainly applied to the plateau, underground tunnels, fire, coal, chemical, tunnelsand high-rise buildings and other places.Emergency rescue and disaster relief, search probes andother respiratory protection when working with long poisonous gases, anoxic environment.Suitable environmental conditions:Product in the following environments should be able to reliably protect the respiratory organsâ?? Atmospheric pressure :70 ï½? 125 kPa Relative humidity :0 100 % RH Temperature : - 10 + 40 .Product Configuration This product is a positive-pressure breathing closed circulatory and respiratory protection devices.Full cover mainly composed of spherical full-field, breathing hose, clean tanks, air bags, coolers,oxygen cylinders, pressure gauges and other components.Residual pressure alarm usingmechanical alarm,which is safe and reliable.The respirator quantitative, automatic replenishment,manual oxygen supply three kinds of ways. This product complies with GA632-2006 "positivepressure oxygen breathing fire" and MT867-2000 "Isolated positive pressure oxygen breathingapparatus" standard.And it has received the National Fire Equipment Quality Supervision andInspection Center and the State Production Safety Inspection approved mining equipmentinspection and testing center.Structural features:a. soft breathing tube bold reform,add the cover This makes breathing gas capacity increases. Avoid frequent automatic replenishment and automatic exhaust breathing in large amounts Save gas supply, reduced breathing resistance, making breathing more stable performanceb. Using advanced exhaust structure, take advantage of oxygen inside the respirator,reduce the burden of carbon dioxide absorbent, save gas source, thereby extending the use of time. Using single-sided sheet material airbag, Increase the volume, decreases the balloon deformation resistance,positive pressure value can be set much lower, making breathing easierd. using the new country's first quantitative valve structure, bottle pressure change will not affectthe oxygen supply ration,more stable and reliable oxygen e. Domestic first large-capacity ice cooler, Lid down structure, Cooling effect Do not need to revealthe respirator to replace ice coverf. use the anti-fog maskanti-fog lens mask and hardening treatment, effectively improve the mask wearer sight problems affect, widening sealing lip mask for a wider population face, improve the mask sealing performance.
IMR EX660 SMART Sensor Gas Detector MAIN FUNCTION AND FEATURES * SMART sensor module, easy for replacement and maintenance * Intrinsically safe design * Wide screen LCD * High / Low alarm adjustable * Calibrating level adjustable for each calibration * Combustible gas channel with high-concentration protection function * Low-voltage alert * Internal memory storage of measurements (100,000 records) * Data upload to PC * Audible, visual and vibration alarm method * Self-test power on * Self-diagnostic and self-correction function IMR EX660 SMART Sensor Gas Detector TECH SPECIFICATIONS * Target gas: combustible gas, toxic gas, Oxygen, VOC * Detecting method: Natural diffusion * Response Time: Semi-conductor, Catalytic, Thermal Conductivity t 90 < 30s Oxygen, Carbon Monoxide, Hydrogen Sulfide t 90 < 30s Other Sensors t 90 < 120s * Working Conditions: Combustible Gas: -40'C ~ 70'C Toxic Gas: -20'C ~ 50'C Working humidity â?¤ 95%RH non-condensating * Power Source: Lithium battery (DC3.7V 6600mAh) * Charging time: 4 ~ 6hours * Continuous working time: 30 hours (for combustible gas and toxic gas) 300 hours (for toxic gas under temperature of 20'C) * USB connectivity for data transfer * Explosion-proof grade: Exia II CT4 * Ingress protection: IP65 * Dimensions: 168mm x 91mm x 45mm * Weight: about 500g
Fire suit description: 1) this product meets standard requirement of ga88-1994 2) work in the high temperature, with high heat insulation(1000 celsius degree) 3) multilayer structures, the surface layer is with aluminium, multilayers inside adopt heat insulation and burning resistant material, also with a layer of perspiration 4) the gloves and the boots also adopt the material of heat insulation, comfortable to wear 5) the helmet also adopts the same material, plating carbon fiber glasses, which has wide and clear visual field 6) a bag for per suit 7) weight: 5.8-6kg Fire suit application: Protecting fireman from the fire, when they approach, when they approach the fire, high temperature, heat oven or burnt things. Suit are used for rescue operations in an area of intense heat, fire, steam, hot liquid by fire fighters in industries like petrochemical plants, foundries, plant, steel, glass, ceramics and etc. Fire suit specifications: 1. Aluminized fabric, cotton lining 2. Radiant heat resisting 900c 3. Jacket/pants or coverall -
Full height turnstiles offer the ultimate in unmanned perimeter security and are available in several versions. Hollow section and solid stainless steel bars are used for the rotor arms and are arranged in a y shape (three bar turnstile) or cross shape (cross turnstile) that rotate on a fixed central axis. According to the requirements on site, passages can be divided into single, double, triple and quadruple versions. All full height turnstiles can be configured for single or bi-directional traffic flow. Full height turnstiles offer exceptional high security and are often used in unmanned locations. Their stainless steel construction allows use in indoor and outdoor locations, and they can be combined with various control systems. An option for canopy lighting is available on request, as well as mounting panels to allow the use of access control Systems and intercoms.
Balaji microtechnologies (bmt) , is india's no.1 manufacturer of large format, f-mount machine vision lens. The company designs, develops & manufacture machine vision lens. With strong in-house r&d & design efforts, our 35 mm f mount lenses are developed with optimal precision techniques & comes with very less camera price, low distortion & produce high quality images. Our 50 mm f mount lens are actively implemented in variety of applications like in machine vision, colour sorter, its/surveillance & medical imaging applications & many others etc. Cctv camera, cctv lens, machine vision, machine vision lens, machine vision lenses, machine vision camera, line scan camera, f mount lens, f mount lenses, line scan cameras, bmt, board camera lens, m12 mount lens, colour sorter, color sorter, colour sorter machine, image sensor, ccd image sensor, cctv lens, 50 mm f mount lens, 35 mm f mount lens, ccd camera, camera lenses, bmt lens, bmt lenses
