Synthetic rubber - Delivery at any seaport (Price for delivery to Nhava Sheva) Let's discuss it! - Payment upon delivery - installment plan 30-60 days !! Price for SIF !!
Properties: Grayish-white powder(granule)No taste, no poison. Densiy is 1.08--1.19. Soluble in acetone, ethyl acetate, benzene, alcohol, slightly soluble in CCl4; Insoluble in water and gasoline. Application: Used as a secondary accelerator with thiazoles and sulphenamides in NR and SBR compounds. Exhibits better storage stability compared to thiuram and dithiocarbamates but is not so active. DPG can be used in latex as secondary gelling agent (foam stabilizer) in the silico-flouride foam process. Packaging: 25kg bag. Storage: Keep container tightly closed in a cool, well-ventilated place. The recommended maximum storage life is 2 years when stored under normal conditions.
Properties: Light yellow or orange crystal (granule). No poison with a little odor of ammonia. The density is 1.34-1.40. Soluble in benzene, acetone. chloroform, insoluble in water, acid, and alkali with lower concentration. Application: An excellent delayed accelerator. The performance is similar as CZ with better scorch safety Widely used in NR, IR, SBR, NBR and EPDM. Can be used alone or with other vulcanization accelerators such as thiurams, guanidines and dithiocarbamates to improve the activity. Mainly used in manufacture of tires, shoes and belts. Packaging: 25kg plastic woven bag. paper with plastic film bag, kraft paper bag, or jumbo bag. Storage: The product should be stored in the dry and cooling place with good ventilation, avoiding exposure of the packaged product to direct sunlight. The validity is 8 months.
Properties: Light yellow powder with light bitter taste. Specific density is 1.65--1.72. Hardly soluble in acetone, benzene, ethanol, and carbon tetrachloride. Insoluble in water, gasoline. Decomposed in strong acid and alkali. Application: Used for NR, IR, SBR, NBR, EPDM and latex. May be regarded as an intermediate between MBT and MBTS. Used as a secondary accelerator in combination with PZ and ZEDC. Similar performance as MBT at curing temperature in dry rubber application. Has lower scorch and better has processing safety. Suitable for mold curing. Requires zinc oxide and stearic acid as activators in many kinds of rubber batch. Easily disperses in rubber; yields non-staining and non-discoloring products. Mainly used in the manufacture of latex products, foam rubber, latex coating gloves, etc. Storage: Keep container tightly closed in a cool, well-ventilated place. The recommended max. storage life is 2 years when stored under normal conditions. Packaging: 25kg/bag.
Properties: A little bitter taste. Specific gravity: 1.50--1.59. Soluble in chloroform, toluene, benzene, carbon tetrachloride. Insoluble in water and ethyl alcohol. Application: Given flat, moderately fast cures in NR and SR. Also used in a wide range of general purpose rubber. Non-staining/non-discolouring in "white" socks; use as a plasticiser and/or retarder in polychloroprene rubber. Secondary acceleration is usually required for synthetic polymers. Better scorch safety than MBT. Storage: Keep container tightly closed in a cool, well-ventilated place. The recommended max. storage life is 2 years when stored under normal conditions. Packaging: 20kg bag.
Properties: Slightly foul odor and bitter taste, nonpoisonous. Specific gravity: 1.46-1.52.Soluble in ethyl acetone, acetone, dilute solution of sodium hydroxide and sodium carbonate, ethyl alcohol. Not easily soluble in benzene. Insoluble in water and gasoline. Application: Used for NR, IR, SBR, NBR, HR and EPDM.One of the mainly used acidic accelerators currontly and a medium fast primary accelerator. Imparts excellent aging properties, when used both alone and in combination with DM, TMTD and many others, mainly basic accelerators for higher activity. But care should be taken because it has a slight tendency to scorch. Unsuitable for use in the manufacture of food contact materials. Mainly used in the manufacture of tires, tubes, footwear, rubber belts and hoses etc. Storage: Keep container tightly closed in a cool, well-ventilated place. The recommended max. storage life is 2 years when stored under normal conditions. Packaging: 25kg bag.
The platinum cure silicone rubber can be applied to the mold making industries that used the fiberglass, gypsum, resin, candle, soap, etc. as raw material; or the food mold making industries, tire casting, rapid prototyping and artificial stone crafts. It gets the acknowledgment of the FDA, and its mixing ration is 10:1 or 1:1, which made the operation more easy. Besides that, it also has a lower shrinkage than the mould making silicone. If you have high requirements for shrinkage, then the platinum cure silicone rubber will be your best choice! Operation method of the platinum cure silicone rubber: 1.Mix the platinum cure silicone rubber and the catalyst in a mixing ration of 1:1 and do the process of the vacumn pumping. (If there is no vacumn machine, you can just pour the mixture slowly from the corner so that less bubbles caused.) 2.Put the product which is covered with a layer of release agent in the middle of a squre frame formed of 4 wooden or plastic plates. 3.Pour the mixture into the frame. 4.After 3 to 5 hours, when the silicone cured, get out the original mold, then you get a finished platinum cured silicone mold. And if you are interested in the platinum cure silicone rubber, you can contact Charlie through the information in the company profile.
Properties: This product is brown piece of amber, Density:1.05g/ cm3. Soluble in benzene, chloroform, carbon disulfide and acetone, but not soluble in water. Fine solution with rubber. This product is combustible, when storing and transporting, always pay attention to fireproof and dampproof. Application: RD is a very important category rubber antioxidant. It has a good protective effect for heat, oxygen and fatigue aging, and stronger inhibitory effect for metal catalytic oxidation, no spray cream phenomenon, widely used in the manufacture of tyres, motorcycles births, bicycles births, rubber, plastic, adhesive tape, wires, cables and other rubber products. Package: In knitted bag lined with plastic bag or kraft paper bag.25kgs/bag or at buyer,s request.
Reclaimed Rubber from whole tire , Used in all rubber based industries premium quality
Silicone rubber insulator scrap
Silicone rubber insulator scrap
Reclaimed natural rubber white ivory color Reclaimed natural black color Tensile : 7-12 mpa Mooney : 40-50 Elongation : 500-600 **Price bases on spec of goods
+ Milky white colour + Ammoniacal odour + Dry rubber content, DRC 60% Min + Non Rubber Content,NRC 1.5% Max + Total Solid content, TSC 61.6% + Ammonia Content 0.60% Min + Volatile Fatty Acid, VFA 0.04 Max + Original Viscosity, OV 70-110 cps + Mechanical stability Time MST 800-1200 sec +Zinc oxide stability time ZST 120 sec Min + Potassium Hydroxide, KOH 060 Max + pH value 10.50 Min + Coagulum content 0.015% Max +Sludge Content 0.02% Max +Origin India +Packing in flexitanks/barrels
Can supply up to 500tonn per month
SBR Crumb Rubber Granules we are offering:- 2-5 MM SBR Rubber Granules (Watch Product Video) 2-4 MM SBR Rubber Granules (Watch Product Video) 5-10 MM SBR Rubber Granules(Watch Product Video) Packing: 45-50 Kilograms PP Bags(Printed or Plain)
Product Description It is used for beer waste, white wine grains and other high-humidity slag pressure filtration dehydration, strong dehydration, low power consumption, long service life, dehydrator manufacturer price is affordable, is the main equipment to achieve dehydration of winery waste. Principle The material passes through the conveyor, transported to the hopper of the dewatering machine, and evenly laid on the filter belt through the auger. The filter belt is leveled by the height of the material layer with the operation of the equipment so that the thickness of the material is completely uniform. Then, the upper and lower two ring-shaped filter belts are completely clamped, and the material layer is clamped by the driving roller, and the pair of rollers in the dewatering zone is mechanically pressed for several times to press out a large amount of water. According to the characteristics of the material, the extrusion force is automatically adjusted to meet the customer's requirements for material moisture.
Natural Rubber SVR3L have good resilience, abrasion and surface friction properties and excellent compression set. It has low hysteresis and rolling resistance with high fatigue resistance and remains flexible at low temperatures. Natural rubber SVR3L has poor resistance to oil, sunlight and ozone and limited thermal capability. Natural rubber SVR3L is superior tear strength and excellent resistance to heat buildup continues to make it a favored ingredient for high-performance tires for race cars, trucks, buses and aircraft. Other applications include tank lining, engine mounts, seals, vibration dampening and diaphragms.
Khandesh Enterprise has made a name for itself by manufacturing completely pollution-free, Rubber Crumb, Rubber Powder, Recycled Buffing Powder and Rubber Granule. The products we offer are affordable and also superior in terms of quality.
Khandesh Enterprise has made a name for itself by manufacturing completely pollution-free, Rubber Crumb, Rubber Powder, Recycled Buffing Powder and Rubber Granule. The products we offer are affordable and also superior in terms of quality.
Khandesh Enterprise has made a name for itself by manufacturing completely pollution-free, Rubber Crumb, Rubber Powder, Recycled Buffing Powder and Rubber Granule. The products we offer are affordable and also superior in terms of quality.
