Mould size: length 215mm with 3 cavity; Heating capcity:1000w each mouldating can finish within 20min. Length:1020mm Height:1900mm Width: 960mm.
Primary parameter of which as following:tansferring volume:150cc/180cc;transferring strength :27tons; Transferring manner: from bottom to top; heating platen size:300300 and 300400; heating platen material :45steel.This type of machine is very good , primary advantage of which as following: heating temp.Is very uniform; transferring speed and volume can be easily controlled and cycle running is soomth;structure of machine is very compact , simple and pretty and by which people can operate easily and safely. Length:1550mm, height:2620mm, width:620mm.
Waste tyre oil refining plant 1. High oil yield 2. Unique exhaust removal system 3. En-friendly.
Number Items Introduction 1 Model JZB-5 JZB-8 JZB-10 2 Raw material Waste plastic and rubber Waste plastic and rubber Waste plastic and rubber 3 Structural form Horizontal Horizontal Horizontal 4 Capacity/day About 5 tons About 8 tons About 10 tons 5 Pressure Atmospheric Atmospheric Atmospheric 6 Rotate speed of the reactor 0.4R/min 0.4R/min 0.4R/min 7 Cooling form Water Water Water 8 Heating form Direct Direct Direct 9 Installation mode Base Base Base 10 Noise db(A) 85 85 85 11 Working mode Intermittent Intermittent Intermittent 12 Size of reactor 2200¡Á6000 2200¡Á6600 2600¡Á6600 13 Volumeof reactor 16 m3 19 m3 23m3 14 Weight of reator About 5 tons About 5.5 tons About 6 tons 15 Production cycle 12 days 12 days 12 days 16 Installation cycle 12 days 12 days 12 days.
ITEM CONTENT 1 MODEL PYROLYSIS PLANT LY-15 (CONTINUOUS) LY-18 (CONTINUOUS) LY-20 (CONTINUOUS) LY-22 (CONTINUOUS) 2 RAW MATERIAL waste plastic, waste rubber waste plastic, waste rubber waste plastic, waste rubber waste plastic, waste rubber 3 STRUCTURE Horizontal rotation Horizontal rotation Horizontal rotation Horizontal rotation 4 16-HOUR HANDING CAPACITY/PER BATCVH 3-4 tons of raw material 5-6 tons of raw material 6-8tons of raw material 8-10 tons of raw material 5 16-HOUR OIL PRODUCTION 1.2-1.6 tons of fuel oil 2-2.4 tons of fuel oil 2.4-3.2 tons of fuel oil 3.2-4 tons of fuel oil 6 WORKING PRESSURE Room pressure Room pressure Room pressure Room pressure 7 HOST SPEED 0.4r/m 0.4r/m 0.4r/m 0.4r/m 8 POWER 3.0KW 4.0KW 4.0KW 5.5KW 9 COOLING Water cooling Water cooling Water cooling Water cooling 10 COOLING WATER CONSUMPTION 3 4 6 8 11 TRANSMISSION Internal gears Internal gears Internal gears Gears 12 HEATING MODE Directly heating Directly heating Directly heating Directly heating 13 INSTALLATION(T/H) Have basis Have basis Have basis Have basis 14 NOISE DB(A) ¡Ü85 ¡Ü85 ¡Ü85 ¡Ü85 15 HOST DIMENSIONS 1500x6000 1800x6000 2000x6000 2200x6600 16 WORKING FORM Continuous operation Continuous operation Continuous operation Continuous operation 17 HOST WEIGHT (T) 15 17 19 22 18 EQUIPMENT MANUFACTURING CYCLE 20 days 20 days 20 days 20 days.
Targets of chemical - SVR 3l management of rubber by TCVN 3769:2004. 1. Concentrations of contaminants retained on the 45m sieve,% m / m, not more than: 0.03 2. Ash,% m / m, not more than: 0.50 3. Nitrogen content,% m / m, not more than: .60 4. Volatiles content,% m / m, not more than: 0.80 5. Early plasticity (Po), not less than: 35 6. Maintain the viscosity index (PRI), not less than: 60 7. Lovibond color index, the form, not more than: 6 8. Mooney viscosity ML (1 '+ 4') 1000C. 33, 33kg/loose bale/ load on 20'DC container/20mts.
Targets of chemical - management by the rubber SVR 10 TCVN 3769:2004. 1. Concentrations of contaminants retained on the 45m sieve,% m / m, not more than: 0.08 2. Ash,% m / m, not more than: 0.60 3. Nitrogen content,% m / m, not more than: .60 4. Volatiles content,% m / m, not more than: 0.80 5. Early plasticity (Po), not less than: 30 6. Maintain the viscosity index (PRI), not less than: 50 7. Index Lovibond color, form, not more than: - 8. Mooney viscosity ML (1 '+ 4') 1000C. 33, 33kg/loose bale/load on 20'dc container/20mts.
1. Concentrations of contaminants retained on the 45m sieve,% m / m, not more than: 0.16 2. Ash,% m / m, not more than: 0.80 3. Nitrogen content,% m / m, not more than: .60 4. Volatiles content,% m / m, not more than: 0.80 5. Early plasticity (Po), not less than: 30 6. Maintain the viscosity index (PRI), not less than: 40 7. Index Lovibond color, form, not more than: - 8. Mooney viscosity ML (1 '+ 4') 1000C. 33, 33kg/loose bale/load on 20'dc container/20mts.
Acten Turnkey Project offers our customers complete transfer of technical know-how from formulationg design, mixing technique, on-site training to quality control. We are able to help our customers in obtaining the state-of-the-art mixer and know-how, to supply quality masterbatch for the industry. We have discovered a need to offer our customers an alternative to manufacturing Masterbatch by supplying pre-formulated and pre-mixed Masterbatch, tailored according to cost and performance. In order to achieve this, we have engaged the services of specialist custom compounder in Malaysia renowned for supplying the new tyre industry. The complete plant equipments include: 1. Feed Stock Hydraulic Cutter 2. Kneader (with different capacity) 3. Roll Mill (with various sizes and usage) 4. Batch-off Machine 5. Rotary Cutter.
Acten Turnkey Project offers our customers complete training on achieving the correct profiled rubber dimension for further processing into precure tread at a later stage. Certified skills in operating the extrusion line can be attained in a short period of time. The extrusion line that Acten offers includes: -2 roll mill -Hot/Cold/Pin-cold feed Extruder -Cooling trough -Profile identification marker -Pneumatic cutter.
Precure Tread Press has a H-frame structure that offers unsurpassed structural strength. It is designed to withstand high press indefinitely. The result of the curing tread will have even thickness throughout the whole tread, which is one of the key factor determining the quality of the tread. Differ than common C or G-frame structure, the H-frame structural intergrity allows 1150MT maximum pressure for the manufacturing of the precure tread. The conventional C-frame structure offers less structural strength, the top frame will crack or show signs of cracking over time and resulting in unevenly cured precure tread with lop-sided thickness. Besides, Acten Precure Tread Press features auto bumping capabilities to release traped air during the curing process. This differ greatly from the bumping action of the normal C-press. The auto bumping of Acten Press will not lift the rubber away from the sipes completely and thus preserving the mould. Acten Press also featuring user friendly quick load and unload device which is time-saving. Acten Precure Tread Press is well known for its design, advanced features and superior performance. We constantly update our range and secifications to take advantage of new technology and design improvements. User friendly features are considered important design parameters for we know very well the extreme conditions working beside a 160c heated press.
Acten Sanding Machine is famous for its excellence performances and durability. Acten provide the machine accordingly to customer's needs, ranging from single head sanding machine up to four-head sanding machine. Acten's sanding machine could perfectly sand off the oxidize surface of the tread liner, without affecting the tread depth, with the perfect precision. Also, our machine's performance will not be restricted due to different patterns, which is one the most important cost-effective factors. The tread sanding line prepares the cured precure tread for shipment readiness. The process involves buffing the precure tread to the desired texture, cementing the buffed surface and packing to form a compact roll backed with plastic sheet pretection. Acten machines are designed for simple operation with many user friendly features. Extensive training is not required to operate the very efficient Acten's tread sanding line. We offer single head, twin head, three head and four head sanding machines. Each different models have distinctive features in order to handle different production capacity. Also, We also offer the complete sanding line that come with auto-cementing and auto-coiling machines. Our complete line is cost-effective and has the user-friendly features.
Acten is able to provide the complete set up of tire retreading plant as well with the transfer of technology know-how. Our offer includes: -Initial and Final Inspection Machines -Buffing Machine -Cementing Mixer -Building Machine -Enveloping and Rimming Machine -Curing Chamber -Complete Monorail System Acten promises to provide quality products and machines for the retreaders, ensuring its safety to use, extending its durability. Most importantly, Acten provides high quality machine at a very reasonable price, which could help add on the competitive advantage of the retreaders.Acten understands that in the highly competitve retreading business, skills and experiences are the major factors that distinct the retreaders from other rivals. Thus, the transfer of know-how from Acten is very important. We have been continuously evolving ourselves to meet the trend and backed with our experiences, Acten will help the investors obtain the unique competitive advantage.
Commodity Name: Tyre reclaimed rubber Tensile strength : 16Mpa Elongation: 460 (%) Mooney Viscosity: (as request) Moisture content :max1.0 (%) Capacity: 20000MT/year Lead time: 7 days Deliver Port: LianYunGang, China. 20kg /piece, packing:plastic film.
Commodity Name: Tyre reclaimed rubber Tensile strength :12Mpa Elongation : min 440 (%) Mooney Viscosity:60 (as request) Moisture content :max1.0 (%) Capacity: 20000MT/year Lead time: 7 days Deliver Port: LianYunGang, China. 20kg/piece , packing: plastic film.
It will be grade 1 products. 25 or 50 kg bell. Ready for export. Kuflam 3 grain = 1kg. All type of Garments item. Other item also. Garments and other products international standard packing.
The Products available for sales from the Company varied from unprocessed scraps, regrind plastic and repelletised Resin. The major material available from the Company are Uncured Rubber Compounds, Unvulcanized Green Rubber Compounds ABS, PP, PVC, PS, HIPS, PET, PET Bottle, PA, POM, AS, PMMA, PBT, PE, PE Bag, HDPE, LDPE, LLDPE PVB FILM SCRAP. Our uncured rubber compound is 100% uncured from tire company.
We serve the export of rubber latex lumb in large quantities according to your needs, and we are also looking for investors for rubber plantation that we manage (with profit sharing system, the core pattern and plasma, the ratio 50%: 10%: 40%, 50% for investors, 10% of us / managers, 40% owner of the land / people / our members). Perton, minimum order per container.
Crumb rubber. 50 kg.
1. Description: Rubber Accelerate 2. Handling and Storage: It can storage in the room, dry and ventilated, prevent high temperature and fire. Its storage period is half a year. 3. Applications: Mainly used for radial tire. First, as reinforcing resin curing agent, improve the hardness of rubber products,Second, it is between two with benzene phenol of additives to form a system of rubber adhesive, and fiber bonding plays an important role. Rubber accelerate:In 25kg net PP/PE bag or the demanding of customer.
