9.5"^10" 120v 1100w 300mm long lead wire with 3meter adhesive
Expansion joint,Expansion joint Supplier Size : DN50~DN1000  Pressure : Max 4.0 Mpa  Bellows : Carbon Steel / Stainless Steel  Other parts : Carbon Steel / Stainless Steel
EKASWELL SB850, Thermoplastic Elastomer (TPE) based hydrophilic particles with high swelling and long cycle capacity. Application areas: Indoor and outdoor places. Pools, water tanks, treatment plants. In basic-curtain combinations. Pipe inlet and outlet. Construction joints in cable ducts. In tunnel segments. In the joints of old and new concrete. Used in construction joints. Advantages: Easy application. Flexible. Controlled swelling does not inflate suddenly in concrete casting and does not damage concrete. It is resistant to high salt concentration and various chemicals, There is no disintegration and. The cycle capacity is high. Technical Features: Ekaswell SB850: Calculated at 23 C. Expansion rate: %850. Elongation at break: %490/770. Tensile strength: 1.2/2.2 Mpa. Color: Beige, Blue, Red, Yellow, Green (can be produced in all colors). Density: 1,25 g/cm3. Hardness: 40. Application temperatures: -30C / 70C.
Mixtures Of Natural Rubber Msr20 And Synthetic Rubber 97.5% MSR20 + 2.5% SBR1502
PK Parts is the leading independent company of spare parts for vehicles. The name is synonymous with quality spare parts and the company has earned a truly enviable reputation around the globe. We manufacture all parts as per customers request.
SPECIFICATIONS : Clamp Sizes : 15mm - 300mm THICKNESS : 1.2mm , 1.5mm , 2.0mm Width : 19mm MOC : Mild steel coating : Zinc Coating Nut Size : Dual Nut - 8 and 10 mm Rubber : EPDM Rubber
SPECIFICATIONS : Clamp Sizes : 15mm - 300mm THICKNESS : 6mm - 36mm MOC : Galvanized - G.I. Nut /washer: 1 Pair each per u- bolt Rubber : EPDM Rubber
Specifications Place of Origin: Thailand Color:: Natural Packaging & Delivery Packaging Details: Starting from 80grams per polybag up to 1kg per polybag. Suitable quantities in export cartons. 100% PURE NATURAL RUBBER BANDS For use at home, office, factories, shops, banks, schools, government offices and other establishments. Our rubber bands are produced from the best quality Pure Natural Rubber and available in various sizes as per your requirement. Diameter 1", 1.4", 2", 2.5", 3" Cut-width: 1.2mm, 1.3mm, 1.4mm, 1.5mm... Thickness: 1.2mm, 1.3mm, 1.4mm, 1.5mm...
According drawing, technical specification. Example: diaphragm, grommet, gasket, bellow, plug, sleeve, check balls, anti-vibration mounts, bumbers, O-Ring, X-Ring.
AS 568, DIN 3771, ISO 3601, BS 1806, BS 4518, SMS 1586, NF T47-501, JIS B 2401, JASO F 404, GOST 9833, and custom sizes
DTH Reclaim the reliable and prestigious name in the field of reclaimed rubber manufacturing which is situated in Polonnaruwa, Sri Lanka. DTH manufactures Superfine Reclaim from the whole tyre scrap accordingly. we specialize in making our product as per our customers’ requirements. DTH with young, enthusiastic & experienced team, experienced technocrats is reckoned for its innovative rubber products, constant supply & dedication to the quality.
Rubber Mats, Rubber industrial components, Gaskets etc
Thermoplastic elastomer based EKAFLEX is a permanently elastic dilatation band used in joints of all types of construction and expansion joints. Application Areas: In underground applications - underneath the plants. In waterproofing of horizontal / vertical dilatations. In the insulation of wide and irregular cracks. In elastic waterproofing of base-parapet connections. In the joints of different building materials such as steel construction and reinforced concrete. In the swimming pool and wastewater units. It is used in tunnel and similar underground structures. Advantages: UV resistant. High resistant to plant roots. Resistant to bacterial attacks and chemical degradation. High resistant to environmental influences and aggressive environments. Easily processable. High elasticity. Method of Application: Surfaces must be clean, free from carriers and loose particles. EKAFIX Application: EKAFIX (Epoxy adhesive) has two components. Component A (3.75 kg) and Component B (1.25 kg) are mixed in a low-speed mixer until homogenous before mixing. With trowel and spatula, EKAFIX (Epoxy Adhesive) is applied to the dilatation sidewalls with a thickness of approximately 1.0 - 1.5 mm. The application width should be at least 40 mm for the 20 cm tape, and at least 50 mm for the tape 30 cm. To ensure strong adherence, the adhesive must be thoroughly applied. EKAFLEX Application: The areas to be applied should be identified and the appropriate tape lengths should be prepared. The tapes to be added are prepared by boiling them with hot air gun before application. The EKAFLEX Band is laid on the adhesive layer and with the help of a suitable roll, full contact is established between the tape and the adhesive layer. In the same way, EKAFIX Epoxy Adhesive is applied to the top surface of the band. The application is done with a thickness of 1.0 - 1.5 mm and a band of at least 20 mm, the layer is allowed to harden. EKAFIX Epoxy Adhesive tape should not be moved, lifted and must be protected against water and/or mechanically stressed until it is fully hardened. It is important to consider that, in cold weather the drying time of the adhesive is longer than it is in hot weather.
VX Conc. series are amino-formaldehyde sulphonamide resin based thermoplastic type of pigments offering excellent brightness, strength, dispersion etc. properties for aqueous based applications like Textile printing, Paper coating, Banners, Rangoli and moorti etc. SR Conc. series are amino-formaldehyde sulphonamide resin based thermosetting type of high quality colours offering excellent solvent resistance and improved temperature stability, used for aerosol paints, solvent based paints and coatings, PVC Plastisols / leather coating, liquid inks, water based paints, Powder Coating, Artist colours, latex, Balloons, Wax /Crayons/Candles, Rubber Bands etc.
Rubber Powder
Rubber Buffing
Un-cured Rubber
We offer rubberised cork sheet. The finest cork granules are bonded with the best quality synthetic rubbers to manufacture our pyramid rubber cork sheets (rc sheets). Our rc sheets, thus are resilient and reliable like their namesake pyramid that have withstood the tests of time and weather, we have also developed joint less rc frames for the gasket industry. Rc sheets are widely used in the transformer industry, automobile industry & electrical switchgear industry. We also make industrial cork gaskets which is used in manufacturing oil type transformers, distribution transformers etc. Sizes: 1 mm to 50 mm
Cylindrical Rubber Fenders are simple to install and operate which makes these units an economical solution for remote locations and for multi user berths where vessel types cannot always be predicted. Cylindrical type rubber fender has low reaction force,little surface pressure,reasonable energy absorb. The HGTï¼?www.hgtmarine.comï¼? Cylindrical Fender was the first rubber fender type to be produced with a defined performance. Installation is simple by using chains, bars, ropes or specially designed ladder brackets, depending on the fender size and substructure. The Cylindrical Fenders' proportional increase of reaction force and energy absorption all the way to the rated deflection is an advantage resulting in softer berthing.
The HGT Cone Fender is an efficient rubber fender type that is used in various applications. It has a conical body and fully rubber-embedded mounting flanges. Its refined geometry and conical shape result in a number of outstanding performance characteristics.
