Description of platinum cured silicone rubber Platinum cure silicone rubber is a kind of fda grade silicone , generally named two-components silicone rubber with translucent appearance, part a and part b mixing in 1:1 .It¡¯s suitable for molds making application. Applications of platinum cure silicone rubber Platinum cure silicone rubber mainly used for making concrete stones, wax molds, pu molds, resin molds, gypsum casting, candle molding and chocolate , candy and any other food product molds making Advantage of platinum cure silicone rubber 1)non- shrinkage (less than 0.1% 2)high tensile and tear strength with high copy times 3) exceptional fluidity and good operability (mixing ratio at 1:1 4)high temperature resistant in 250 centigrade Operation instruction of platinum cure silicone rubber Step one: take 100g of part a and 100g of part b and mix in 1:1 and mix the two part evenly. Step two: vacuum pumping Without exception, this step takes less than 10 minutes. Note: the time for vacuum-pumping should be less than 3¡ª5 minutes , otherwise, once the silicone rubber has cross-link reaction during vacuum pumping process, it will not be operated. Step three: pouring the mixture into the frame with original mold slowly . Shelf life for silicon rubber for mold making 810months, when stored in a dry & cool place under the room temperature 25. Packing for silicon rubber for mold making 20kg/drum for part a+ 20kg/drum for part b in one set , 200 kg/drum for part a+ 200kg/drum for part b in one set 25kg/drum
Description of platinum cured silicone rubber Platinum cure silicone rubber is a kind of translucent liquid , generally named two-components silicone rubber with mixing in 1:1 .Its mainly suitable for tire molds making . Advantage of platinum cure silicone rubber for tire mold 1)non- shrinkage 2)high tensile and tear strength with high copy times 3) exceptional fluidity and good operability (mixing ratio at 1:1 4)high temperature resistant in 250 centigrade Operation instruction of platinum cure silicone rubber for tire mold Step one: take 100g of part a and 100g of part b and mix in 1:1 and mix the two part evenly. Step two: vacuum pumping Without exception, this step takes less than 10 minutes. Note: the time for vacuum-pumping should be less than 35 minutes , otherwise, once the silicone rubber has cross-link reaction during vacuum pumping process, it will not be operated. Step three: pouring the mixture into the frame with original mold slowly . Shelf life for silicon rubber for mold making 8~10months, when stored in a dry & cool place under the room temperature 25. Packing for silicon rubber for mold making 20kg/drum for part a+ 20kg/drum for part b in one set , 200 kg/drum for part a+ 200kg/drum for part b in one set Iso.Ul, rohs
Silicon rubber for mold making applications 1. Silicon rubber for mold making can used for poly resin crafts, pu crafts, pu resin crafts , gypsum crafts , unsaturated resin crafts, lighting and candles crafts , plastic toy , stationery gifts crafts industry, 2. Silicon rubber for mold making is applicable for large statue buddha, relieve , furniture decorative materials, statues buddha, artifacts copied, building decoration materials, large-scale cement mold 3. Silicon rubber for mold making is intend for artificial fossils factory, europe component factory, simulation landscapes, animals and plants sculpture, sandstone crafts and so on. Silicon rubber for mold making features Silicon rubber for mold making is white flowing liquid with general hardness of 22-50aafter curing with features (1) high tensile & tear strength (2) high duplication times (3) low linear shrinkage (4) resistance to high-temperature (5) low shrinkage and non-deformation (6)resistance to acid-alkali and expansion Silicon rubber for mold making operation instructions Step one: take 100g of part a and add 2g of part b and mix the silicone rubber and curing agent evenly. Step two: vacuum pumping Without exception, this step takes less than 10 minutes. Note: the time for vacuum-pumping should be less than 5 minutes , otherwise, once the silicone rubber has cross-link reaction during vacuum pumping process, it will not be operated. Step three: brushing cast & perfusion molding operation Shelf life for silicon rubber for mold making 10~12months, when stored in a dry & cool place under the room temperature 25. Packing for silicon rubber for mold making 1kg/ bottle , 5 kg/drum vacuumed packing, 25kgs/drum vacuumed packing, 200 kg/drum 25kg/drum
Hello sir / madam We produce a rubber all modul products and we will waiting for supply to buyer for full quality to our satisfaction Thank you F1exports team Any lot size
Pad printing silicon rubber features: 1)High print times 2)Abrasion resistance. 3)Good printing effects 4)Permanent and durable Pad printing silicon rubber operation instructions: . Step one: take 100g of part a and add 2g of part b and mix the silicone rubber and curing agent evenly. Step two: vacuum pumping Without exception, this step takes less than 10 minutes. Note: the time for vacuum-pumping should be less than 35 minutes , otherwise, once the silicone rubber has cross-link reaction during vacuum pumping process, it will not be operated. Step three: pouring the vacuumed mixture into the original mold slowly, Shelf life for silicon rubber for mold making 8~10months, when stored in a dry & cool place under the room temperature 25. Packing for silicon rubber for mold making 20kgs/drum vacuumed packing 25kg/drum
Dear valued customers, On behalf of leaders and staffs of investcom investment jsc., i would like to give our best regards to you. Investcom investment jsc., is one of the most prestigious companies in the line of processing, exporting natural rubber; importing, selling building materials, interior products and investing into real estate. From the foundation period till present, investcom always concentrate on maintaining our leading prestige in vietnam about product quality and the way of serving customers. We’re vietnamese private natural rubber factory and we also have 2 marble quarries. Rightnow we're selling natural rubber Thank you and best regards. Standard
Properties: yellow powder insoluble in water, slightly soluble in dry methanol, acetone, alkyl Hey, also soluble in dry THF Application: Rubber curing agent TCY can be used for the curing agent of Acrylate and other chlorinated rubber, natural rubber and rubber blends. The curing speed of Rubber curing agent TCY is high, scorch is safe, long time, and vulcanized rubber is oil resistant, heat-resistant and pressure change resistant. Category: Rubber chemicals. Tags: curing agent. PE bag lined with PE film.Net weight:10kg/bag or 25kg/drum.
Silicon hy-638# applications: Silicon rubber is mainly used for toy gifts and craftwork gifts with the advantages of good tensile strength, high tear strength, high temperature resistance, high duplication times and repeated use, etc. It is suitable for small products or fine and precision products which is difficult to demould. This silicone rubber is one of the products with the highest use level in the production of craftwork gifts and the shrinkage is up to 0.2% Silicon hy-638# general description: Rtv-2 molding silicon rubber and silicone rubber are general called two-component room temperature vulcanization silicone rubber with excellent fluidity and good operational performance. Add curing agent of 2%-3% at the room temperature, the silicone rubber is still operational within 30 minutes, and in 2-3 hours, an elastic silicon mold will be obtained with resistance to deformation, high-temperature, acid and alkali and expansion. The silicone rubber is mainly applicable to mold duplication of poly crafts, resin craftworks, lightings, candles, etc. And fabrication of precision molds 20kg/drum 25kg/drum 200kg/drum
Silicon rubber HY-638 application: Silicon RTV (HY-638 ) is two parts condensation liquid silicone rubber that can be cure under room temperature. silicon rubber mainly used for the manufacturer of products made of unsaturated resin, epoxy resin, polyurethane, etc. Silicon rubber(HY-638) features: HY-638# silicon rubber is mainly with the advantages of good tensile strength, high tear strength, high temperature resistance, high duplication times and repeated use, etc. silicon rubber(HY-638) is the most suitable for small products or fine and precision products which is difficult to demould. This silicon rubber is one of the products with the highest use level in the production of craftwork gifts and the shrinkage less than 0.2% 25KG/DRUM, 200KG/DRUM
We are supplying various types of rubber: svr 3l, svr l, svr 10, svr 10cv, svr 20vc, svr cv60, svr cv50, svr 20, svr 5, natural latex concentrate (ha, la, xa) ribbed smoked sheet classification (rss 1, 2, 3, 4, 5) Bag 33.3kg
I have 40 tons a month of uncured rubber scrap that is used in the makin gof tyres 40 tons
We deal in all kind of scrap inner butyle tubes like truck, bus, car and motor cycle and can deliver minimum 100/mt per month Pp bags of 100 kg
Application: Insoluble sulphur ot20 had been widely used in natural rubber and a variety of synthetic rubber. They are made with tire and rubber products such as: rubber belt, rubber pipe and sealants etc. They are specially used in radial truck tire making. Technical specification Appearance: yellow powder (non-flying) Sulphur content (%): 79.0-81.0 Insoluble sulphur content (% min. ): 90.00 High temp. Stability (% min. ) (105 degree*15min): 80 Oil content (%): 19.0-21.0 Acid content (as h2so4), % max.: 0.05 Heating loss (60 degree *2h), % max.: 0.40 Ash, % max.: 0.10 Fineness(100mesh), % min.: 99.8 25kg/bag
Mainly used in tire, rubber product Rubber adhesive ra 65(hmmm) Property: this product is the improved product of rubber adhesive a. The appearance of this product is one kind of white powder and gives off methanal upon heating. It is hypo-methanal donator among double functioning adhesive system for rubber Specification Appearance: white powder Ash content (850 degree), %: 29-35 Moisture content (boiling evaporation method) & 4.5 Sieve residue (325 mesh wet-method), % & 0.3 Free formaldehyde, % & 0.1 25kg/bag
Specifications CBS Rubber Accelerator for tyre industry Gray-white powder(granule) CAS:95-33-0 Packing:25kg/bag ISO9001-2008 SGS Application: A medium fast primary accelerator suitable for NR, IR, SBR, NBR, HR and EPDM. An outstanding delayed action accelerator. Be top effective and safe when used at ordinary processing temperatures, causing no scorches. Vulcanized show excellent physical property and quick complete. Usually used alone, when activated by Accelerator D, Accelerator TT and Accelerator TS. Packaging: 25kg plastic woven bag, paper wilh plastic film bag, kraft paper bag 25KG/bag
Specifications 1.Rubber antioxidant 6ppd(4020) 2.N(1, 3-dimethyl-butyl)-n'-phenyl-p-phenylenediamine 3.Cas no.:793-24-8 4.Manufacturer 5.Iso Product name: rubber antioxidant 6ppd(4020) Chemical name: n(1, 3-dimethyl-butyl)-n'-phenyl-p-phenylenediamine Cas no.: 793-24-8 Structure: Specification: Item Granule Appearance Dark purple pastilles Initial m.P. (min) ¡ý ¡ãc 45.0 Loss on drying (max) ¡ü % 0.50 Ash (max) ¡ü % 0.15 Assay(gc) ¡ý% 96.0 25kg/bag
Natural rubber neoprene for adhesiveplease wait... Pushed to top Item code: 38240000 | last modified on: 18 mar 2013 specifications 1.High quality and competitive price 2.Free sample 3.Best service and timely delivery Polychloroprene rubber(neoprene) Standard Q/chs25-2005 Appearance Creamy flaky or lumpy Packing 25kgs/woven polypropylene bags with a release polyethylene liner Properties 1.Excellent storage stability, process ability and safety property 2.Sunlight and heat resistance, oil resistance, chemical reagent resistance and combustion retardancy 3.Slow vulcanization rate Application It can used for manufacturing oil-resistant rubber hose and rubber boards, cable jackets, rubber sealing parts, etc, and is also widely used in making adhesive. Specification Item Specification Cr2441 1000-3000 1000-3000 1000-3000 Cr2442 3001-7000 3001-7000 3001-7000 Cr2443 7001-10000 7001-10000 7001-10000 Peel strength n/cm 90 min. 80 min. 75 min. Volatile matter% 1.0 max. 1.2 max. 1.2 max. Ash content% 1.0 max 1.2 max. 1.2 max. More information Storage life: one year below 25 'c from the date of production 25
Pad Printing Silicone Rubber Usages: Pad printing silicone rubber is mainly use for printing irregular patterns of plastic toys, electroplating toys and trade makers . Pad printing silicone rubber as a carrier which transfer patterns on the steel plate to the toys products surface. Pad Printing Silicone Rubber Features: Pad printing silicone rubber with high print times and abrasion resistance. Pad printing silicone rubber has good printing effects, permanent and durable. We can provide all kinds of color and our catalyst is free. Pad Printing Silicone Rubber Operation Instructions: Pad printing silicone rubber is two-component silicone, part A is liquid silicon rubber, part B is catalyst. 25kg/drum
Shoe mold silicone rubber 25kg/drum
RTV-2 silicone Features of Rtv-2 silicone rubber 1 Two part of liquid fluid: liquid white silicone and curing agent. 2 Cure at room-temperature within 4-8 hours, but all performance will act perfectly when it cure within 24 hours. 3 Good fluidity and excellent operation. 4 Good resistance to weather, temperature, aging, acid.. 5 Excellent tear strength, comfortable duplication times. Silicon rubber for mold making applications Silicon rubber for molding making is primarily intended for poly resin crafts,PU crafts,PU resin crafts ,gypsum crafts ,unsaturated resin crafts, lighting and candles crafts ,plastic toy , stationery gifts crafts industry, a large statue Buddha, relievo furniture, furniture decorative materials, statues Buddha, artifacts copied, building decoration materials, large-scale cement mold, artificial fossils Factory,Europe component factory, simulation landscapes, animals and plants sculpture, sandstone crafts and so on. 25kg/drum 200kg/drum
