Dimensions: 450*350 mm - Thickness: 20mm And many different sizes according to customer requirements Purpose: Anti-Vibration Pads are a simple yet effective solution to absorb vibration, and impact and reduce noise from various types of machinery. Using an Anti-Vibration Pad correctly can often be the most cost-effective way to address a high-frequency vibration Material: Mix from SBR and Natural Rubber Physical Specification: - Hardness: 65 + 5 - Tensile: 3.5 N/mm2 - Elongation: 300% Applications: Appropriate for machinery requiring anti-vibration performance and stability performance Color: Black
Size: - Length*Width: 150*150 cm. - Thickness: 12mm Advantage of this Tille: - Excellent slip resistance, water resistance, - Resistance to heavy impact loads, sound absorbent. Indoor flooring: - Does not react to weather conditions. - It has no negative effect on children if directly touched according to our customer feedbacks. - Endurance is more than 2 tons per square meter. Color: Black. Applications: - It is used in sport halls and locations that need Shock absorbers and safety flooring. - It is used in kidsâ?? areas and schools. Material: SBR Rubber mixed with PU Binder Life span: 5:10 years - according to the use
Dimensions: Width: Up to 1500mm Length: Up to 50 m. Thickness: 1.5 - 50 mm. General Description: EPDM rubber (ethylene propylene diene monomer rubber) is an elastomer that is characterized by wide range of applications and good chemical resistance. Features: Chloramine resistant Good heat and compression resistance. Resistant to ketones, hot and cold water, steam, alkalis, polar solvents,ozone, sunlight, alcohols, glycol engine coolant and Skydrol (phosphate ester hydraulic fluid). Resistant for air conditions. Applications: Automotive: Weather stripping and seals. Wire and cable harnesses. Window spacers. Hydraulic brake systems. Door, window and trunk seals Roofing: Roof membrane. Roof coating. RV roof. Industrial: Water system O-rings and hoses. Tubing, grommets, and belts. Electrical insulations and stinger covers.
Dimensions: - Width*Length: 11cm * 3.2m : 8cm * 3.2m - Thickness: 2cm Description: To prevent low of water past a closed gate, seals are provided either on the gate or on the metal frame in the gate slot. Rubber is the most commonly used material for seals, as it is elastic, deforms readily and regains its original shape on removal of load. Material: - EPDM. - Screwed + held by steel sandwich. Physical Specification: - Hardness Shore A: 60 - 70 - Tensile (kg/cm2) : 100 kg/cm2 - Elongation at break %.: 450% - Color: Black Applications: Water Preventative in rivers Dams
Dimensions: Width*Length: 15cm * 13m : 2.5cm * 13m - Thickness: 1 cm Description: To prevent flow of water past a closed gate, seals are provided either on the gate or on the metal frame in the gate slot. Rubber is the most commonly used material for seals, as it is elastic, deforms readily and regains its original shape on removal of load. Material: - EPDM. - Screwed + held by steel sandwich. Physical Specification: - Hardness Shore A: 60 - 70 - Tensile (kg/cm2) : 100 kg/cm2 - Elongation at break %.: 450% - Color: Black Applications: Water Preventative in rivers Dams
Dimensions: - Width*Length: 20cm * 12m - Thickness: 1 cm Description: - To prevent flow of water past a closed gate, seals are provided either on the gate or on the metal frame in the gate slot. Rubber is the most commonly used material for seals, as it is elastic, deforms readily and regains its original shape on removal of load. Material: - EPDM. - Screwed + held by steel sandwich Physical Specification: - Hardness Shore A: 60 - 70 - Tensile (kg/cm2) : 100 kg/cm2 - Elongation at break %.: 450% - Color: Black Applications: Water Preventative in rivers Dams
1/. Automatic vulcanizer with PLC controler Automatic vulcanizer for curing silicone or organic rubber moulds. Features: 1. PLC Automatic intelligent vulcanizing control. 2. Touch-screen control panel. 3. Automatic pressure regulation. 4. Digital temperature controller. 5. Curing cycle timer. 6. Automatic forced cooling 7. Digital display pressure, temperature and time. 8. Maximum pressure protection 9. Hydraulic group with motor pump and oil pressure release valve. 10. Electro-valve controlled plate opening. 11. Environmental and energy saving insulation design to provide a better temperature uniformity and energy cost saving. Model APM12-I APM14-I APM16-I APM18-I APM20-I Mould diameter max 12 14 16 18 20 Mould thickness, max 150mm Heating 6KW 6KW 9.6KW 10.8KW 12KW Motor 1.5KW Pressure,max 32T 32T 50T 50T 50T 2/. Automatic vulcanizer Automatic vulcanizer for curing silicone or organic rubber moulds for centrifgal casting for bucket and accessories , jewelry Features: 1. Automatic control 2. Automatic pressure regulation. 2. Automatic temperature control 3. Curing cycle timer. 4. Automatic forced cooling 5. Digital display temperature and time. 6. Maximum pressure protection 7. Environmental and energy saving insulation design to provide a better temperature uniformity and 8. energy cost saving. Model APM12 APM14 APM16 APM18 APM20 Mould diameter max 12 14 16 18 20 Mould thickness, max 150mm Heating 6KW 6KW 9.6KW 10.8KW 12KW Motor 1.5KW Pressure,max 32T 32T 50T 50T 50T 3/. manual rubber vulcanizer press for centrifugal casting vulcanizer for curing rubber moulds for centrifugal casting. Features: 1. Automatic temperature control 2. Curing cycle timer. 3. Digital display temperature and time. 4. heating plates with good surfces assure perfect flatness Model MVP12 MVP14 MVP16 MVP18 MVP20 Mould diameter, max 12 14 16 18 20 Mould thickness, max 150mm Heating 4.0KW 6.0KW 9.6KW 10.8KW 12KW Pressure, max 32T 32T 50T 50T 50T
WIRE BRAIDED LPG HOSE FOR HOUSEHOLD AN INDUSTRIAL USE AS PER IS -9573 (PART-2) OF BIS Various Sizes Available
O Rings of Different Sizes according to various standards and requirements
1. Premium quality 2, Density and viscosity accept customization. 3, On different cloth material , for different production machine and process , use different silicone models 4,pigment and catalyst depends on your local temperature and your demand . 5 ,China original silicone manufacturer.
Price : Rs 7,000 / Piece Minimum Order Quantity: 10 Piece Material : Rubber Shape : Rectangular Thickness various Application Industry ; Excavator Color ; Black We can supply clip on Rubber track pads and bolt on rubber pads at different sizes for various mini excavators and track equipment. Additional Information: Delivery Time: 35 Days
ethylene propylene diene monomer rubber
We have in our offer different grades and forms of non vulcanised tire compounds from tire plants.
Price: 24.00 - 30.00 INR/Box Supply Ability : 5000 Per Week Delivery Time :1 Week
Rubber cords
EPDM profile
Extruded rubber profile
Rubber Plucking Finger Code 110. Use for removing poultry feathers delicately . This round design provides delicate touch that makes it effective for picking gentle gentle, small and medium birds such as quail and chicken. Comes in 3 levels of hardness- *SH55+/-5 *SH60+/-5 *SH65+/-5
Rubber Plucking Fingers Code 160 This design is long, soft and flexible. A thin rubber plucking finger with rounded spirals on one side. It provides excellent bird cleaning performance. Comes in 3 level of hardness- *SH55+/-5 *SH60+/-5 *SH065+/-5
Rubber Plucking Fingers 120. Used for depilating poultry feathers. This design has a solid round body and slightly thicker that is more effective for picking broiler's feathers such as duck and goose. Comes in 3 level of hardness Brown : SH55+/-5 Green : SH60+/-5 Red : SH65+/-5 Carton boxes : 500 pieces per box (15kg)
