Dimensions: Width: Up to 1500mm Length: Up to 50 m. Thickness: 1.5 - 50 mm. General Description: EPDM rubber (ethylene propylene diene monomer rubber) is an elastomer that is characterized by wide range of applications and good chemical resistance. Features: Chloramine resistant Good heat and compression resistance. Resistant to ketones, hot and cold water, steam, alkalis, polar solvents,ozone, sunlight, alcohols, glycol engine coolant and Skydrol (phosphate ester hydraulic fluid). Resistant for air conditions. Applications: Automotive: Weather stripping and seals. Wire and cable harnesses. Window spacers. Hydraulic brake systems. Door, window and trunk seals Roofing: Roof membrane. Roof coating. RV roof. Industrial: Water system O-rings and hoses. Tubing, grommets, and belts. Electrical insulations and stinger covers.
Dimensions: - Width*Length: 11cm * 3.2m : 8cm * 3.2m - Thickness: 2cm Description: To prevent low of water past a closed gate, seals are provided either on the gate or on the metal frame in the gate slot. Rubber is the most commonly used material for seals, as it is elastic, deforms readily and regains its original shape on removal of load. Material: - EPDM. - Screwed + held by steel sandwich. Physical Specification: - Hardness Shore A: 60 - 70 - Tensile (kg/cm2) : 100 kg/cm2 - Elongation at break %.: 450% - Color: Black Applications: Water Preventative in rivers Dams
Dimensions: Width*Length: 15cm * 13m : 2.5cm * 13m - Thickness: 1 cm Description: To prevent flow of water past a closed gate, seals are provided either on the gate or on the metal frame in the gate slot. Rubber is the most commonly used material for seals, as it is elastic, deforms readily and regains its original shape on removal of load. Material: - EPDM. - Screwed + held by steel sandwich. Physical Specification: - Hardness Shore A: 60 - 70 - Tensile (kg/cm2) : 100 kg/cm2 - Elongation at break %.: 450% - Color: Black Applications: Water Preventative in rivers Dams
Dimensions: - Width*Length: 20cm * 12m - Thickness: 1 cm Description: - To prevent flow of water past a closed gate, seals are provided either on the gate or on the metal frame in the gate slot. Rubber is the most commonly used material for seals, as it is elastic, deforms readily and regains its original shape on removal of load. Material: - EPDM. - Screwed + held by steel sandwich Physical Specification: - Hardness Shore A: 60 - 70 - Tensile (kg/cm2) : 100 kg/cm2 - Elongation at break %.: 450% - Color: Black Applications: Water Preventative in rivers Dams
1/. Automatic vulcanizer with PLC controler Automatic vulcanizer for curing silicone or organic rubber moulds. Features: 1. PLC Automatic intelligent vulcanizing control. 2. Touch-screen control panel. 3. Automatic pressure regulation. 4. Digital temperature controller. 5. Curing cycle timer. 6. Automatic forced cooling 7. Digital display pressure, temperature and time. 8. Maximum pressure protection 9. Hydraulic group with motor pump and oil pressure release valve. 10. Electro-valve controlled plate opening. 11. Environmental and energy saving insulation design to provide a better temperature uniformity and energy cost saving. Model APM12-I APM14-I APM16-I APM18-I APM20-I Mould diameter max 12 14 16 18 20 Mould thickness, max 150mm Heating 6KW 6KW 9.6KW 10.8KW 12KW Motor 1.5KW Pressure,max 32T 32T 50T 50T 50T 2/. Automatic vulcanizer Automatic vulcanizer for curing silicone or organic rubber moulds for centrifgal casting for bucket and accessories , jewelry Features: 1. Automatic control 2. Automatic pressure regulation. 2. Automatic temperature control 3. Curing cycle timer. 4. Automatic forced cooling 5. Digital display temperature and time. 6. Maximum pressure protection 7. Environmental and energy saving insulation design to provide a better temperature uniformity and 8. energy cost saving. Model APM12 APM14 APM16 APM18 APM20 Mould diameter max 12 14 16 18 20 Mould thickness, max 150mm Heating 6KW 6KW 9.6KW 10.8KW 12KW Motor 1.5KW Pressure,max 32T 32T 50T 50T 50T 3/. manual rubber vulcanizer press for centrifugal casting vulcanizer for curing rubber moulds for centrifugal casting. Features: 1. Automatic temperature control 2. Curing cycle timer. 3. Digital display temperature and time. 4. heating plates with good surfces assure perfect flatness Model MVP12 MVP14 MVP16 MVP18 MVP20 Mould diameter, max 12 14 16 18 20 Mould thickness, max 150mm Heating 4.0KW 6.0KW 9.6KW 10.8KW 12KW Pressure, max 32T 32T 50T 50T 50T
WIRE BRAIDED LPG HOSE FOR HOUSEHOLD AN INDUSTRIAL USE AS PER IS -9573 (PART-2) OF BIS Various Sizes Available
O Rings of Different Sizes according to various standards and requirements
Size: 16 mm ± 0.2 Shape: Spherical Hardness: 58-90 Shore A Rebound Resilience: >92% Abrasion: Extraordinary Food Grade: As per CFR 21 US FDA 177.2600 and EU 1935/2004 and BfR regulations Service Temperature: Up to 100C Appearance: White or as per customers requirement
25 mm ¸ rubber balls: Size: 25 mm ± 0.3 Shape: Spherical Hardness: 58-90 Shore A Rebound Resilience: >92% Abrasion: Par Excellence Service Temperature: Up to 100 C or as per customers requirement Appearance: White or as per customers requirement
30 mm ¸ rubber balls: Size: 30 mm ± 0.4 Shape: Spherical Hardness: 58-90 Shore A Rebound Resilience: >92% Abrasion: Par Excellence Service Temperature: Up to 100 C or as per customers requirement Appearance: White or as per customers requirement
32 mm rubber balls: Size: 32 mm ± 0.4 Shape: Spherical Hardness: 58-90 Shore A Rebound Resilience: >92% Abrasion: Par Excellence Service Temperature: Up to 100 C or as per customers requirement Appearance: White or as per customers requirement
36 mm¸ rubber balls: Size: 36 mm + 0.3 Shape: Spherical Hardness: 58-90 Shore A�° Rebound Resilience: >92% Abrasion: Par Excellence Service Temperature: Up to 100�°C or as per customers requirement Appearance: White or as per customersâ?? requirement
50 mm rubber balls: Size: 50 mm 0.3 Shape: Spherical Hardness: 58-90 Shore A Rebound Resilience: >92% Abrasion: Par Excellence Service Temperature: Up to 100 C or as per customers requirement Appearance: White or as per customersâ?? requirement
AVM 120x110: It is designed to absorb and damp shock impulses and hence the unwanted vibration of your machinery ends here. It does this by converting the kinetic energy of the shock into another form of energy (typically heat) which is then dissipated. The tensile strength of the AVM is beyond the expectation which makes your machinery maintenance-free and saves downtime. Height: 120 mm Outer Dia: 110 mm Bore sizes: 31 and 22 mm
AVM 90x100: It is designed to absorb and damp shock impulses and hence the unwanted vibration of your machinery ends here. It does this by converting the kinetic energy of the shock into another form of energy (typically heat) which is then dissipated. The tensile strength of the AVM is beyond the expectation which makes your machineries maintenance free and saves the downtime. Height: 90 mm Outer Dia: 100 mm Bore sizes: 30 and 20 mm
AVM 96x96: It is designed to absorb and damp shock impulses and hence the unwanted vibration of your machinery ends here. It does this by converting the kinetic energy of the shock into another form of energy (typically heat) which is then dissipated. The tensile strength of the AVM is beyond the expectation which makes your machineries maintenance free and saves the downtime. Height: 96 mm Outer Dia: 96 mm Bore sizes: 26 and 20 mm
AVM 96x86: It is designed to absorb and damp shock impulses and hence the unwanted vibration of your machinery ends here. It does this by converting the kinetic energy of the shock into another form of energy (typically heat) which is then dissipated. The tensile strength of the AVM is beyond the expectation which makes your machinery maintenance free and saves the downtime. Height: 96 mm Outer Dia: 86 mm Bore sizes: 30 and 20 mm
Rubber Inspection Cap/Dummy Disc Size: 100 ± 0.2 mm | 112 ± 0.2 mm | 120 ± 0.2 mm | 150 ± 0.2 mm Material: EPDM | NR | CR | NBR | SBR | Silicone or as per the customers requirement Shape: Round Hardness: 70 Shore A or as per customers requirement TS: 23 Mpa Abrasion: Extraordinary Service Temperature: Up to 100C to 200C Appearance: Grey or as per customers requirement
1. Premium quality 2, Density and viscosity accept customization. 3, On different cloth material , for different production machine and process , use different silicone models 4,pigment and catalyst depends on your local temperature and your demand . 5 ,China original silicone manufacturer.
Price : Rs 7,000 / Piece Minimum Order Quantity: 10 Piece Material : Rubber Shape : Rectangular Thickness various Application Industry ; Excavator Color ; Black We can supply clip on Rubber track pads and bolt on rubber pads at different sizes for various mini excavators and track equipment. Additional Information: Delivery Time: 35 Days
