Zenith offers rubber-coated fabrics with special characteristics. We manufacture various types of fabrics for different applications such as barrier protection, abrasion resistance, air retention and high strength to weight ratios, flex resistance and resistance to chemical gases and fuels. Zenith uses basic fabrics such as cotton, nylon, polyester, glass, knits, silk, kevlar®. Fabrics of various blends are coated with nitrile, chloroprene, silicon, nr/sbr, butyl, hypalon (csm), epdm & blended polymers for variety of applications in the fields of insulation, defense, aviation, marine and offshore operations.
Zrf fabrics are available from 0.3mm to 1.5mm thickness, 1.0 meter to 1.5 meter in width and in long lengths up to 100 meters
It has good resistance of high temperature; nonpoisonous and tasteless which has no effect on health, it can be used in chemical ,
Electrical, fitness and other industries with different temperature conditions, temperature range is -60 to 200¡æ
Rubber ball main type: silicone ball, silicone rubber balls, sponge rubber ball, solid rubber balls, small rubber balls, hard rubber balls, soft rubber ball, nbr rubber ball, viton rubber ball. Rubber balls size: 3.2mm, 4.8mm, 5.5mm, 6.35mm, 6.5mm, 7.14mm, 8.0mm, 8.5mm, 9.52mm, 10.5mm, 27mm, 32mm, 48mm, 63mm, 70mm, 80mm to120mm. Rubber balls uses in astronautics, the automobile, the drugs manufacture, the valve, pump, the bathroom, the electron, the electric appliance, and so on industry. Rubber ball material: nbr, silicone, viton, hnbr, cr, ptfe, epdm. We maintain quality production equipment and mold in our company, we supply various rubber balls.
Trade info
Min. Order: 1 pieces
Trade terms: fob, cif
Payment terms: l/c, t/t
Production capacity: 10000tons
Basic info
Export markets:north america, south america, southeast asia, africa, oceania, mid east, western europe
Additional info.
Production capacity:10000tons
Product desciption
Application: apply to the rubber construct of bridge engineering, roof water-proof, punching rubber washer and sealing fittings
Specification: 1-50mmx500~2000mm(txw)
Performance: anti-aging, ozone bearing, good electric performance and anti-tired
Specific gravity: 1.4 g/cm3
Tensile strength: 7 mpa
Hardness: 65 shore a
Elongation: 300%
Specific gravity: 1.4 g/cm3
Tensile strength: 7 mpa
Hardness: 65 shore a
Elongation: 300%
Export markets:north america, south america, southeast asia, africa, oceania, mid east, western europe
Additional info.
Production capacity:10000tons
Product desciption
Application: used in electronic, textile, printing & dyeing fields, volume electricity resistance rate up to 104~108|¸ cm
Specification: 2-20mmx500~2000mm(txw)
Performance: good elasticity, good electrode and eliminating static interference
Specific gravity: 1.45 g/cm3
Tensile strength: 8.0mpa
Hardness: 65 shore a
Elongation: 400%
Luster: black, green, one face black and the other green
Pack: kraft paper, film bag and woven bag
Specific gravity: 1.45 g/cm3
Tensile strength: 8.0mpa
Hardness: 65 shore a
Elongation: 400%
Luster: black, green, one face black and the other green
Pack: kraft paper, film bag and woven bag
11150 Rubber Items Suppliers
Short on time? Let Rubber Items sellers contact you.
Rubbe accelerator pbo-80 is a special pre-dispersed zinc oxide that apply to rubber industry. Its combined elastomer will prevent moisture absorption in storing.Because of pre-dispersed more evenly, the rubber contains pbo-80 makes product more smooth compare to extrusion rubber made by powder lead oxide.Generally, the tensile and stretch of the pre-dispersed pbo-80 contained vulcanized rubber will be prompted, and elongation at break improved meanwhile.
Process:
Normally, powder pbo hardly disperse evenly under processing temperature, which cause vulcanization activity declined as well as rubber' static mechanical properties and dynamic fatigue.However, pre-dispersed pbo-80 , because of selection and control of grain diameter, and making pre-dispersed by using its carrier of epr(ethylene propylene rubber)and dispersed surfactants, can keep the best activity of components and dispersed evenly when doing the feeding process during mixing.What's more, pre-dispersed pbo-80 has advantages in the followed:
1.Its granule shape prevents blocking under storage environment.
2.Easy mixing
3. Good flowing
4.No dusty
5.No wastage in feeding
6.Improve the stabilization and homogeneity of each batch mixed rubber
7.Avoid the thermal expansion in feeding of powder zinc oxide.
It is suggested feeding at the end of mixing process.
Dosage:3 - 8 phr
Application:
Used to almost all rubber products to improve the statics and dynamic ability.
Packing:
25kg/pe inner carton
Storing:
Cool and shady place, keeping dry, 12 months sealed packing.
JIER Arch Rubber Fenders have been optimized for increased energy absorption, providing reliable and trouble free service for a wide variety of berths even under the most severe conditions. They are being widely used in port facility due to their high energy absorption and low reaction force and stable performance as well as high durability following simple structure. They are particularly useful for vessels with high allowable hull pressures and for locations where mounting space is limited. A variety of sizes and lengths are offered.
Jier cone rubber fender is the result of continuous product development. This fender design is based on the cell fender which was introduced to world-wide markets more than 25 years ago. This type of fender can be considered as the latest in state-of-the-art moulded fender products.
JIER Super Cell Rubber Fender is a well established fender type. This fender has a hollow cylindrical body with fully rubber-imbedded mounting flanges and is designed to deflect in an axial direction. Originally designed to replace cylindrical fenders, these fenders have more than 30 years track record with only some minor improvements over the years. Cell Rubber fenders are very robust and have been used for decades in many ports around the world.
Jier jcy series cylindrical rubber fenders are commonly used fenders recommended for all types of applications to ensure a safe and linear berthing to a variety of vessels. Adequate installation is simply achieved by using chains, bars, ropes or specially designed ladder brackets.
shaped bore inside. Designed for use on tugs and barges, they offer long term durability for applications where repeated compression cycles are encountered in pushing service. They also offer the excellent physical characteristics needed to handle the high loading which occurs both on initial contact, and throughout the service cycle.
We are one of the leading OEM suppliers of PTFE Ball Valve Seats, O-Rings, Quad Seals and more rubber and Engineering plastic products in India and Abroad. We at ISMAT manufacture O rings and seals from Viton, HNBR, Nitrile and also manufacture ball valve seats from PTFE, filled grades of PTFE as well as other engineering plastics like PEEK and KEL-F. We have recently developed AED resistant O rings for the Valve industry.
Pad printing silicone rubber is mainly used for printing irregular patterns of plastic toys, electroplating toys and trade makers. Pad printing silicone rubber is a carrier which transfers patterns on the steel plate to the toys products surface.
Pad printing silicone rubber features:
Pad printing silicone rubber with high print times and abrasion resistance. Pad printing silicone rubber has good printing effects, permanent and durable. We can provide all kinds of color and our catalyst is free.
Pad printing silicone rubber operation instructions:
Pad printing silicone rubber is two-component silicone, part a is liquid silicon rubber, part b is catalyst. The usual mixture of silicone rubber and catalyst is 100: 2 or 100: 3. E.G. We take 100g of liquid silicon rubber and 2g to 3g catalyst, mix them and pour it to your mold. A fter 2 to 4 hours, you will get a pad printing silicone rubber.
Faq of pad printing silicone rubber:
Why we should add silicon oil into pad printing silicone rubber?
Customers should change the hardness of the silicone pad according to the different patterns of products. Silicon oil can change the hardness and the viscosity of the liquid silicone rubber.
Place of origin: china
Brand name: hong ye silicone rubber
We are manufacturing rubber o-ring in various sizes and in different types od rubber material i.E. Nbr, hnbr, viton, neoprene, epdm, silicon, polyurethene etc. We have ready sizes are 0.5mm to 400mm. Short order will be acceptable.
Std. Packing 50~1000 pcs.
11150 Rubber Items Suppliers
Short on time? Let Rubber Items sellers contact you.
