Dimensions: - Width*Length: 36cm * 107cm - Height: 5 cm Purpose: - Rubber bridge expansion joints are mainly made of rubber, steel plate and angle iron. Steel plates are set in the rubber bridge expansion to strengthen the bearing capacity and they can slide freely along the angle iron to meet the expansion deformation of main grid. - Because of the excellent sealability and shock-absorbing effect of rubber, rubber bridge expansion joints do well in proofing water and reducing noise. The elasticity of rubber plates and its shear deformation in the telescopic channel helps the whole device to realize telescopic motion. Features : - Rubber bridge expansion joints are made of prime-quality rubber, have anti-aging and have a long service life. - Wear resistance, corrosion resistance. - Rubber bridge expansion joints can withstand the weight of vehicles and pedestrians. - During installation, bolt holes on the bottom and each junction are filled with adhesion agent which makes the whole rubber bridge expansion joints be highly water-resistant. - Rubber bridge expansion joints can ensure vehicles runs smoothly and no noise. Material: Rubber & Steel Plates. Applications: - Rubber bridge expansion joint is used in expressway. - Rubber Bridge expansion installed in the end of bridge. - Rubber bridge expansion joint is used flyover. - Rubber bridge expansion joint is used in connection of bridge
- Manufactured from durable EPDM rubber. - High UV & Ozone resistant - Fast & easy installation. - Maintenance Free - Provides a permanent seal for any type of construction - Allows exerting a continuous and uniform force against the joint walls. Applications: - Bridges - Parapets - Cark parks - Buildings - Tunnels - Water treatment plants.
Dimensions: Width: Up to 1500mm - Length: up to 20,000mm according to thicknesses - Thickness: 3mm - 25mm according to use and applications. Description: Anti-Abrasion Rubber Lining Sheet is a blended natural and synthetic rubber sheet offering tear and impact resistance & high elasticity. It has excellent resistance to large particle impact and abrasion. Material : Natural Rubber and Synthetic Rubber Physical Specification : - Hardness (Shore A): 5 + 50 - Tensile (MPa): 3.5 min. - Elongation at break: %300 - Abrasion max: 150mm3 - Temperature Range: 20-c to 70+c. Color: Standard Black Optional (Beige, Grey). Applications: 1. Shot blasting rooms. 2. Parking areas. 3. Wall lining for workshops and factories.
Dimensions: - MC001AVM: Dia: 44* Height: 41 mm - MC002AVM: Dia: 44* Height: 44 mm (with steel base thickness 3mm & Dia. 50mm) Features: Easy-to-install Universal Mounts - Provide fail-safe, all-attitude isolation for vehicle cabs, engines, transmissions and other equipment. - Designed for shock load damping. - It withstands up to 50 kg per piece and must be installed on a circular fitting base. Physical Specification: - Hardness (Shore A): 40 - 80 - Tensile Strength (MPa): 4 min. - Elongation at break (%): 280 min. Color: Standard: Black Applications: - Anti-vibration Rubber. - Noise Absorption Rubber. - Engine, Generator, Motor, Compressor, etc
Dimensions: 450*350 mm - Thickness: 20mm And many different sizes according to customer requirements Purpose: Anti-Vibration Pads are a simple yet effective solution to absorb vibration, and impact and reduce noise from various types of machinery. Using an Anti-Vibration Pad correctly can often be the most cost-effective way to address a high-frequency vibration Material: Mix from SBR and Natural Rubber Physical Specification: - Hardness: 65 + 5 - Tensile: 3.5 N/mm2 - Elongation: 300% Applications: Appropriate for machinery requiring anti-vibration performance and stability performance Color: Black
Size: - Length*Width: 150*150 cm. - Thickness: 12mm Advantage of this Tille: - Excellent slip resistance, water resistance, - Resistance to heavy impact loads, sound absorbent. Indoor flooring: - Does not react to weather conditions. - It has no negative effect on children if directly touched according to our customer feedbacks. - Endurance is more than 2 tons per square meter. Color: Black. Applications: - It is used in sport halls and locations that need Shock absorbers and safety flooring. - It is used in kidsâ?? areas and schools. Material: SBR Rubber mixed with PU Binder Life span: 5:10 years - according to the use
Dimensions: Width: Up to 1500mm Length: Up to 50 m. Thickness: 1.5 - 50 mm. General Description: EPDM rubber (ethylene propylene diene monomer rubber) is an elastomer that is characterized by wide range of applications and good chemical resistance. Features: Chloramine resistant Good heat and compression resistance. Resistant to ketones, hot and cold water, steam, alkalis, polar solvents,ozone, sunlight, alcohols, glycol engine coolant and Skydrol (phosphate ester hydraulic fluid). Resistant for air conditions. Applications: Automotive: Weather stripping and seals. Wire and cable harnesses. Window spacers. Hydraulic brake systems. Door, window and trunk seals Roofing: Roof membrane. Roof coating. RV roof. Industrial: Water system O-rings and hoses. Tubing, grommets, and belts. Electrical insulations and stinger covers.
Dimensions: - Width*Length: 11cm * 3.2m : 8cm * 3.2m - Thickness: 2cm Description: To prevent low of water past a closed gate, seals are provided either on the gate or on the metal frame in the gate slot. Rubber is the most commonly used material for seals, as it is elastic, deforms readily and regains its original shape on removal of load. Material: - EPDM. - Screwed + held by steel sandwich. Physical Specification: - Hardness Shore A: 60 - 70 - Tensile (kg/cm2) : 100 kg/cm2 - Elongation at break %.: 450% - Color: Black Applications: Water Preventative in rivers Dams
Dimensions: Width*Length: 15cm * 13m : 2.5cm * 13m - Thickness: 1 cm Description: To prevent flow of water past a closed gate, seals are provided either on the gate or on the metal frame in the gate slot. Rubber is the most commonly used material for seals, as it is elastic, deforms readily and regains its original shape on removal of load. Material: - EPDM. - Screwed + held by steel sandwich. Physical Specification: - Hardness Shore A: 60 - 70 - Tensile (kg/cm2) : 100 kg/cm2 - Elongation at break %.: 450% - Color: Black Applications: Water Preventative in rivers Dams
Dimensions: - Width*Length: 20cm * 12m - Thickness: 1 cm Description: - To prevent flow of water past a closed gate, seals are provided either on the gate or on the metal frame in the gate slot. Rubber is the most commonly used material for seals, as it is elastic, deforms readily and regains its original shape on removal of load. Material: - EPDM. - Screwed + held by steel sandwich Physical Specification: - Hardness Shore A: 60 - 70 - Tensile (kg/cm2) : 100 kg/cm2 - Elongation at break %.: 450% - Color: Black Applications: Water Preventative in rivers Dams
1/. Automatic vulcanizer with PLC controler Automatic vulcanizer for curing silicone or organic rubber moulds. Features: 1. PLC Automatic intelligent vulcanizing control. 2. Touch-screen control panel. 3. Automatic pressure regulation. 4. Digital temperature controller. 5. Curing cycle timer. 6. Automatic forced cooling 7. Digital display pressure, temperature and time. 8. Maximum pressure protection 9. Hydraulic group with motor pump and oil pressure release valve. 10. Electro-valve controlled plate opening. 11. Environmental and energy saving insulation design to provide a better temperature uniformity and energy cost saving. Model APM12-I APM14-I APM16-I APM18-I APM20-I Mould diameter max 12 14 16 18 20 Mould thickness, max 150mm Heating 6KW 6KW 9.6KW 10.8KW 12KW Motor 1.5KW Pressure,max 32T 32T 50T 50T 50T 2/. Automatic vulcanizer Automatic vulcanizer for curing silicone or organic rubber moulds for centrifgal casting for bucket and accessories , jewelry Features: 1. Automatic control 2. Automatic pressure regulation. 2. Automatic temperature control 3. Curing cycle timer. 4. Automatic forced cooling 5. Digital display temperature and time. 6. Maximum pressure protection 7. Environmental and energy saving insulation design to provide a better temperature uniformity and 8. energy cost saving. Model APM12 APM14 APM16 APM18 APM20 Mould diameter max 12 14 16 18 20 Mould thickness, max 150mm Heating 6KW 6KW 9.6KW 10.8KW 12KW Motor 1.5KW Pressure,max 32T 32T 50T 50T 50T 3/. manual rubber vulcanizer press for centrifugal casting vulcanizer for curing rubber moulds for centrifugal casting. Features: 1. Automatic temperature control 2. Curing cycle timer. 3. Digital display temperature and time. 4. heating plates with good surfces assure perfect flatness Model MVP12 MVP14 MVP16 MVP18 MVP20 Mould diameter, max 12 14 16 18 20 Mould thickness, max 150mm Heating 4.0KW 6.0KW 9.6KW 10.8KW 12KW Pressure, max 32T 32T 50T 50T 50T
WIRE BRAIDED LPG HOSE FOR HOUSEHOLD AN INDUSTRIAL USE AS PER IS -9573 (PART-2) OF BIS Various Sizes Available
O Rings of Different Sizes according to various standards and requirements
Size: 16 mm ± 0.2 Shape: Spherical Hardness: 58-90 Shore A Rebound Resilience: >92% Abrasion: Extraordinary Food Grade: As per CFR 21 US FDA 177.2600 and EU 1935/2004 and BfR regulations Service Temperature: Up to 100C Appearance: White or as per customers requirement
25 mm ¸ rubber balls: Size: 25 mm ± 0.3 Shape: Spherical Hardness: 58-90 Shore A Rebound Resilience: >92% Abrasion: Par Excellence Service Temperature: Up to 100 C or as per customers requirement Appearance: White or as per customers requirement
30 mm ¸ rubber balls: Size: 30 mm ± 0.4 Shape: Spherical Hardness: 58-90 Shore A Rebound Resilience: >92% Abrasion: Par Excellence Service Temperature: Up to 100 C or as per customers requirement Appearance: White or as per customers requirement
32 mm rubber balls: Size: 32 mm ± 0.4 Shape: Spherical Hardness: 58-90 Shore A Rebound Resilience: >92% Abrasion: Par Excellence Service Temperature: Up to 100 C or as per customers requirement Appearance: White or as per customers requirement
36 mm¸ rubber balls: Size: 36 mm + 0.3 Shape: Spherical Hardness: 58-90 Shore A�° Rebound Resilience: >92% Abrasion: Par Excellence Service Temperature: Up to 100�°C or as per customers requirement Appearance: White or as per customersâ?? requirement
50 mm rubber balls: Size: 50 mm 0.3 Shape: Spherical Hardness: 58-90 Shore A Rebound Resilience: >92% Abrasion: Par Excellence Service Temperature: Up to 100 C or as per customers requirement Appearance: White or as per customersâ?? requirement
AVM 120x110: It is designed to absorb and damp shock impulses and hence the unwanted vibration of your machinery ends here. It does this by converting the kinetic energy of the shock into another form of energy (typically heat) which is then dissipated. The tensile strength of the AVM is beyond the expectation which makes your machinery maintenance-free and saves downtime. Height: 120 mm Outer Dia: 110 mm Bore sizes: 31 and 22 mm
