Features:
Natural Latex rubber is waterproof, non-toxic, safe, elastic and flexible to fit most fingers.
Protecting fingers with burns, blisters or wounds from infection or contamination and keeping your fingers from glue, chemical, etc.
Finger Glove is Disposable for single use only.
Specifications:
Material: Natural Latex Rubber
Length: Approx. 6.5cm
Diameter: Approx. S(1.5cm)/M (1.8cm)/L (2.cm)
Quantity: 1 x Bag of Approx. 144pcs(46g) or 1440pcs Finger Cots
SUNBOW silicone cold shrink tube has been used in 5G base stations, installation is twice as fast as peers
For the big market of 5G base stations, although many silicone cold shrink tube manufacturers continue to increase research and development efforts, few manufacturers can really install silicone cold shrink tubes quickly. It is very confident to say that SUNBOW silicone cold shrink tube is currently the only product in China that can be quickly installed, and it is twice as fast as its counterparts.
The vast majority of silicone cold shrink tubes made in domestic factories have practically no difference in performance. Because silicone cold shrink tubes are made of special silicone rubber materials, the only difference is the installation problem. The silicone cold shrink tubes manufactured by more than 80% of the factories are as follows:
1. Need to push the cold shrink tube to the root of the joint as much as possible, and start to carefully pull out the support bar;
2. Push the cold shrink sleeve towards the root of the joint while pulling the support core rope, and observe at the same time until the cold shrink sleeve is firmly contracted at the joint root of the joint;
3. Do not push, pull or shake the cold shrink sleeve afterwards, otherwise the shrinkage may not be firm or damaged;
4. If the drawing is not smooth, do not force it, you should complete the installation of other cold shrink sleeves.
The matters needing attention during installation are as follows:
1. It is strictly forbidden to wrap the cold shrink sleeve when it is installed, otherwise it will easily cause the water inlet and waterproof failure;
2. Use a wrench to tighten the adjacent connector where the shrink sleeve joint is installed, otherwise it will cause damage to the shrink sleeve.
SUNBOW understands that users spend a lot of energy and time when installing the silicone cold shrink tube, so they developed a silicone cold shrink tube that simplifies the installation. You only need to pull the silicone cold shrink tube to support the entire installation process. The installation time is twice as fast as its counterparts, and there will be no installation errors caused by functional aging or damage.
NON SKID DESIGN: Stop your washer or dryer from making so much noise and leaving marks on the floor.
EXCELLENT SHOCK ABSORBER: Heavy duty rubber absorbs and quiets noisy vibration and squeaking soundsUNIVERSAL SIZE: Put anti
vibration pads under the appliance to prevent it from walking or wobbling
MINI LEVEL INCLUDED: Use our handy mini bubble level to make sure your machine is leveled correctly
E: grace at gofairubber dot come
Diatax is manufacturing more than for 1,00,000 different types and sizes of Rubber Orings And Seals with more than 2500 Molds in Store
Diatax - Orings
An O-rings is a torus shaped seal placed between two parts to prevent the passing of fluids and gasses. It is an efficient sealing element for both static and dynamic applications. In industries from aerosol to aerospace, O-rings are the most commonly used seals in the world. Why? Because they are effective, economical, and easy to use.
Although the O-ring is a simple sealing concept, there are many factors to take into account when selecting the right O-ring for a specific application. Our O-ring Technical Handbook explains the factors involved when selecting the right O-ring.
Diatax manufactures O-rings according to or any custom size/tolerance required. O-rings are also available in accordance with different standards(AS 568A, DIN 3701, BS 1806/ BS 4518, JIS B2401, JIS NFT47-501, SMS 1568 and ISO 3601) and with various approvals.
Expertise - Manufacturing And Materials
With the right selection of material an O-Ring can be used in a varied media such as: Gas, Fuel, Chemical, Water, Lubricants Etc.
Other than the standard sizes, ISG is able to offer O-Rings in non-standard sizes as per the customer requirement & application.
Diatax can offer O-Rings various polymers some of which are below
NITRILE (NBR)
FKM (VITON)
SILICONE (VMQ)
 NEOPRENE (CR)
EPDM
HNBR
FLUOROSILICONE (FVMQ)
PERFLUOROELASTOMER (FFKM)
 AFLAS (TFE/P)
O-Rings in all above material can be produced in regular hardness ( 70 / 75 / 90 ) Shore A and customised hardness as well.
With a very sound compounding knowledge Diatax can produce orings in various other hardness as per customer & application requirements.
11195 Rubber Items Suppliers
Short on time? Let Rubber Items sellers contact you.
TPE have been designed as the ideal compound for seals, O-rings and gaskets for pipes, tubes and hoses, and are ideal for all applications in which labor costs for production and assembly are high. Unipoly Rubber & Plastic is a lower cost solution compared to thermosets such as EPDM or SBR, as the use of TPE will allow you to fully automate your production process.
In house tool and die design has proven to be an extremely economical means of getting your parts to production. Whenever possible UNIPOLY Rubber & Plastic uses our in house tool and die design team to build your mold or modify one of our current molds, which translates into better quality control and immediate time and money savings for our customer.
Krishna Rubber Industries Established 2016 expertise in Rubber, Plastic & PTFE Products. we are Manufacturing, Supplying & Trading all types of Industrial Rubber Products likes Natural Rubber (NR), Ethylene Propylene (EPDM)Styrene, Nitrile(NBR), Viton (Fluorocarbone), Silicone (VMQ), Flurosilicone(FVMQ), Butadiene Rubber ( SBR), Neoprene (Chloroprene), Polyurethane, PTFE(Teflon), we are supplying standard rubber material as well as customized rubber material as per customer requirement with standard quality. We full fill the customer requirement for Rubber products with reasonable price with good quality.
We produce printed sheets in sizes 300X300 and 500X500 with different heights with EPDM, NBR, SILICONE, VITON or any other elastomer in the required hardnesses and colours.
Sevitsil Silicone breathing hoses are manufactured in Clean room Class 10000 by high equipped machineries and well experienced engineers.
These highly flexible, non-kinking tubes are suitable as anaesthesia devices and breathing devices.
This Hoses are available with and without end sleeves.
Sizes:
�· Neonatal : SSBH â?? 10 MM Bore diameter of 8 MM
�· Paediatric : SSBH â?? 15 MM Bore diameter of 12 MM
�· Adult : SSBH â?? 22 MM Bore diameter of 16 MM
Applications:
�· At-home respiration systems.
�· Breathing support therapy.
�· Bi-level and CPAP therapy â?? for sleep apnoea, aerosol therapy.
�· Medical industry.
�· Anaesthetic apparatus.
�· Respiration systems.
Benefits:
�· Extremely light weight, high tensile and terminal strength.
�· High dimensional and buckling stability, good flexibility,
�· Easy to clean.
�· Sterilize able with hot air at 200�°C, steam at 134�°C, gas (EO), gamma rays.
�· Qualities in accordance with FDA �§ 177.2600, USP Class VI, ISO 10993.
11195 Rubber Items Suppliers
Short on time? Let Rubber Items sellers contact you.
