We have Rubber Chemical Oil for machine use. Change used for solar, gas and etc. RCO is no reduced.
Rubber accelerator dpg Chemical name:diphenyl guanidine Molecular formula:c13h13n3 Cas no:102-06-7 Specification: Appearance Gray-white powder Initial m.P. Oc 144.0 Heating loss 0.40 Ash 0.40 Residues on sieve(150m), % 0.10 Properties:grayish-white powder. No taste, no poison. Densiy is 1.08-1.19. Soluble in acetone, ethyl acetate, benzene, alcohol, slightly soluble in ccl4; insoluble in water and gasoline. Application:used as a secondary accelerator with thiazoles and sulphenamides in nr and sbr compounds. Exhibits better storage stability compared to thiuram and dithiocarbamates but is not so active. Dpg can be used in latex as secondary gelling agent (foam stabilizer) in the silico-flouride foam process Packing: 25kg in kraft paper bag with pe bag inside, or 25kg in plastic woven bag with pe bag inside, or as customers request. Storage:keep in a cool, well-ventilated place. The shelf life is 2 years. Notes: the products could be oil coated powder, as per customers request.
Dibenzothiazole disulfide Cas no: 120-78-5 Specification: no. Itemunitspecification 1appearance light-yellow powder 2initial m. P. (min)c162.0 3loss on drying (max)%0.40 4ash (max)%0.50 5residues on 63um sieve (max)%0.50 6oil content (*)%0; 1.0--2.0 Properties: a little bitter taste. Specific gravity: 1.50--1.59. Soluble in chloroform, toluene, benzene, carbon tetrachloride. Insoluble in water and ethyl alcohol. Application: given flat, moderately fast cures in nr and sr. Also used in a wide range of general purpose rubber. Non-staining/non-discolouring in "white" socks; use as a plasticiser and/or retarder in polychloroprene rubber. Secondary acceleration is usually required for synth etic polymers. Better scorch safety than mbt. Storage: keep container tightly closed in a cool, well-ventilated place. The recommended max. Storage life is 2 years when stored under normal conditions. Packaging: 20kg bag.
Powdered styrene-butadiene rubber (SBR) is widely used as polymer modified material in road asphalt modification, asphalt ductilizer, high viscosity asphalt, hydraulic asphalt and waterproof membrane. The modified styrene-butadiene rubber powder has more special functions, besides excellent low temperature performance, it also has excellent high temperature performance and elastic recovery ability. Appearance White powder Particle size (mesh) 40 Moisture content (%) 3 Molecular content (%) 200 thousand-300 thousand Bound styrene (%) 22.5-24.5 Mooney Viscosity (ML+4) 38-68 300% Elongation (Mpa) 10-15 Tensile strength (Mpa) 21 Elongation at break (%) 320
This is a common accelerator for natural rubber, synthesis rubber and reclaimed rubber, which is easy to spread in rubber, no contamination. Vulcanized rubber has good antioxidant quality, but bitter, unsuitable for the rubber products contacting with food. Mainly used for the manufacturing of tire, rubber tube, rubber tape, general industrial rubber products.
PU binder for synthetic running track and EPDM field base layer installation . PU binder for safety playground and wetpour . PU binder for rubber mat production . PU binder is an un pigmented and solvent free single component Polyurethane Binder of medium viscosity. It is based on MDI with 100% solid content and high standard quality control of polyether raw material and additives material for binder's intensity, life time, smell ,color and UV resistance characteristics. The defined viscosity of PU binder effects an excellent mixing with rubber granules while where is hardly any run off from the granules. Another characteristic is the suitable curing time and therefore application time allowing day construction joints to be easily and correctly done . The yellowing that occurs when PU binder is exposed to UV-light does not affect its mechanical properties.PU binder is moisture curing .
Chemical Name:Zinc diethyl dithiocarbamate Molecular Formula:C10H20N2S4Zn Molecular Weight: 361.93 CAS NO:14324-55-1 EINECS NO.: 238-270-9 Specification: Item Powder Oiled powder Granule Appearance (visual inspection) white powder(Granule) Initial M.P. oC� 174.0 174.0 174.0 heating loss %� 0.40 0.40 0.40 Zinc content % 17.5-19.0 17.2-18.7 17.2-18.7 Residues on sieve(150μm), % � 0.10 0.10 Residues on sieve(63μm), % � 0.50 0.50 Oil content, % \ 1.0-2.0 Granule diameter, mm \ \ 1.5-2.5 Properties:White powder (granule). Density is 1.41. Soluble in 1% NaOH solution, CS2, benzene, chloroform, slightly soluble in alcohol, insoluble in gasoline. Application:ZDEC is used as primary or secondary accelerator for NR, SBR, IIR or EPDM; also used for natural rubbers or synthetic latex; as anti-oxidant for rubber-based adhesives. Packing:25kg in kraft paper bag with PE bag inside. Storage:The product should be stored in the dry and cooling place with good ventilation, avoiding exposure of the packaged product to direct sunlight. The validity is 2 years.
The product is extracted and refined from a plant. It mainly acts as a softener in the production of rubber material and reclaimed rubber. It is non-irritative, non-toxic, and environmentally friendly. The produced reclaimed rubber can meet European Standard. Specification: Items Specification Appearance Dark brown viscous semisolid Engler Viscosity S(C100ml;85ï¼? 300-500 Volatile Content, % 6.0 max Moisture (V/W), % 0.5 max Mechanical Impurity, % 0.1 max Ash, % 0.9 max Specific Gravity (d20/4) 0.95-1.05 Odor Non-irritative 18 PAHS sum (mg/kgï¼? 5.00 max Packing: 1)200kg/drum 2)5kg/bag, 40bags/drum Any inquiry, pls contact sofia.chu(at)zzdenglan.com freely. Payment Term: 1)30%TT before production and balance against copy of BL 2)LC at sight
Item Specification Engler ViscositySï¼?C100ml;85ï¼? 250-350 Specific Gravityï¼?d20/4ï¼? 1.01-1.06 Volatile Contentï¼?%â?¤ 6.0 Wash Content, %â?¤ 0.50 Acidity,%â?¤ 0.30 Mechanical Impurity,%â?¤ 0.03 Water,ï¼?â?¤ 0.5 Packing: 200kg/drum 10kg/bag, 20bags/drum Any inquiry, pls contact sofia.chu(at)zzdenglan.com freely.
Compared with the general product, odorless environment-friendly rubber reclaiming agent (reclaim rubber activator) has better permeability and stability in the desulfuration process of reclaimed rubber (regenerated rubber). It can increase the strength tensile, elongation of reclaim rubber and low the Mooney viscosity. This improves the performance of reclaim rubber. Product Specification Appearance Light brown viscous liquid Total Sulfur Content 13% Min Combined Sulfur Content 12% Min Free Sulfur content 1% Max Viscosity (35 centigrade), Pa.s 10-30 Solubility in water Negligible Features 1.Shorten the desulfurizing time 2.Improve the product quality 3.Decrease the production cost 4.Meet European export standard Application Widely used for the whole tire reclaim rubber, butyl reclaim rubber and EPDM reclaim rubber. Packing: 1)1kg/bottle, 20 bottles/carton, 2) 200kg/drum Any inquiry, pls be free to contact sofia.chu(at)zzdenglan.com.
The rubber reclaiming agent has better permeability and stability in the desulfuration process of reclaimed rubber. It can increase the strength tensile, elongation of reclaim rubber and low the Mooney viscosity. This improves the performance of reclaim rubber. Product Specification Appearance Dark brown viscous liquid Total Sulfur Content 11% Min Combined Sulfur Content 10% Min Free Sulfur content 1% Max Viscosity (35 centigrade), Pa.s 8-20 Solubility in water Negligible Features 1.Shorten the desulfurizing time 2.Improve the product quality 3.Decrease the production cost Application Widely used for the whole tire reclaim rubber, butyl reclaim rubber and EPDM reclaim rubber. Any inquiry, pls contact sofia.chu(at)zzdenglan.com freely.
Applications: Specific wollastonite powder can be used to be the substitute for lithopone, part of titanium dioxide, white carbon black, light calcium and clay in different finished rubber products. The application results show that wollastonite can improve the covering ability of white colorant and play a role in whitening.It can replace a large quantity of titanium dioxide, clay and lithopone in the adhesives with light colors, which can strengthen the qualities of the products and reduce the cost.The combination of wollastonite and coupling agents can improve the properties of rubber compounds and expand its application range. Our advantages: 1.lower Fe content 2.Lower loss on ignition (LOI) 3.Fewer surface defects 4.Improved shrinkage control 5.Higher impact strength 6.Faster drying times 7.higher whiteness
Bright Future factory can produce high quality reclaimed rubber from scrap tires . our factory used environmental matriculate chemical our Rubber was tested in European laboratories free of diseases
we produce rubber powder from truck & bus Tyres only. so our rubber powder has high quality and free from fiber and steel
RubberON Industries produce ultra-fine hi structure crumb of 30,40,60, 80 100 mesh from Only nylon Trucks and Buses tyres. During the compounding, the rubber penetrates into these hi structure particles and a strong mechanical bond is created.When mixed in a rubber compound, this crumb becomes one with it and imparts high properties. It was also found that by using 10 phr of 80/ 100 mesh crumbs, no loss of properties was observed, even though the carbon phr had to be reduced to maintain the hardness, thus affecting cost reduction without impairing properties.
We are a manufacturer of super fine grade of crumb rubber powder like 30, 40, 60, 80 mesh powder with low ash content and 99% free from fiber and metal content.
Rubber accelerator cbs Chemical name:n-cyclohexyl-2-benzothiazole sulfenamide Molecular formula:c13h16n2s2 Cas no:95-33-0 Specification: Appearance Gray-white powder Gray -white granular Initial m.P. Oc 98.0 98.0 Heating loss % 0.30 0.30 Ash% 0.30 0.30 Residues on sieve(150î¼m), % 0.10 Properties:gray-white powder (granule) with a little odor, no poison. The density is 1.31-1.34. M.P.: 98oc above. Soluble in benzene, boluene, chloroform, cs2, ch2cl2 acetone, ethyl acetate, hardly soluble in alcohol, insoluble in water, gasoline, acid / alkali with lower concentration Application:cbs has excellent scorching property, high curing rate, high modulus of vulcanized rubbers, wide range of application. It is a sulfenamide accelerator with the highest activity in epdm. 25kg/bag
Rubber accelerator tmtd Specification: Chemical name:tetramethyl thiuram disulfide Cas no: 137-26-8 Specification: no.Itemunitspecification 1appearance-white powder 2initial m.P. (min)c142.0 3loss on drying (max)%0.40 4ash (max)%0.30 5residue on 150m sieve (max)%0.10 Properties:no odor and poison. Irritating to the skin and the respiratory tract. Specific gravity: 1.38--1.44. Soluble in chloroform, acetone, benzene; hardly soluble in carbon tetrachloride, ethyl alcohol & insoluble in water or gasoline. Application:can be used as a single accelerator, as a secondary accelerator or as a sulphur donor in most sulphur-cured elastomers. Scorchy and gives fast cure rates. Produces an excellent vulcanisation plateau with good heat aging and compression set resistance in sulphurless and ev cure systems. Good color retention is obtained in non-black vulcanisation. A valuable secondary accelerator for epdm. May be used as a retarder in the vulcanisation of polychloroprene rubber with etu. Storage:keep container tightly closed in a cool, well-ventilated place. The recommended max. Storage life is 2 years when stored under normal conditions. Packaging: 25kg bag.
Product Nameï¼? Antioxidant 168 Chemical Nameï¼? Tris-(2,4-di-tert-butyl-phenyl)-phosphite Molecular Formulaï¼? C42H63O3P Molecular Weightï¼? 646.94 CAS No.ï¼? 31570-04-4 HS No.ï¼? 2924299090 EC No.: 250-709-6 Chemical structureï¼? Production Properties: This product is white spherical particle. It is soluble in benzene, toluene, chloroform, cyclohexane and other organic solvents, insoluble in water, alcohol and other polar solvents; Slightly soluble in esters. This product is odorless and tasteless. It has low toxicity, good thermal stability and excellent hydrolysis resistance performance. Specificationsï¼? Item Specification Appearance white spherical particles Melting Point,â?? 183.0-187.0 Volatile,% â?¤ 0.20 Solubility Clear Light Transmittance 425nm ï¼? % â?¥ 98.0 500nm ï¼? % â?¥ 98.0 Acid valueï¼?(KOH)mg/g â?¤ 0.30 Assay,% â?¥ 99.0 2,4-Di-tert-butylphenol ï¼?% â?¤ 0.20 Anti-hydrolyzeï¼?90â??in waterï¼?14hï¼? qualified
We produce various kinds of Rubber accelerators,including M,DM(MBTS),CBS(CZ),TMTD,NOBS(MBS),NS(TBBS),Stearic Acid,Coumarone,Sulphur and other Chemical products with reliable quality and competitive price.
