PPGI, GI, CR.
Roofing sheets, coils.
Gypsum board.
Insulated MGO roofing sheets.
Heat and cold insulating roofing sheet, fire, water and sound proof..
3 Tab Asphalt Shingle 3-Tab Asphalt Shingles are a widely used type of roofing material known for their affordability, simplicity, and versatility. They are named for their design, which features three evenly spaced tabs on each shingle, creating a uniform, flat appearance on the roof. Whats Asphalt Shingles? Although wood shingles, slate, tile, metal, and a host of other materials can be used to surface house roofs, asphalt stands out as the roofing material of choice because it is relatively affordable, easy to apply, fire-resistant, comparatively lightweight, available almost every-where, and durable enough to last for 15 to 40 years. In the past, uninteresting appearance was the biggest strike against asphalt roofing-it just didn't offer the visual interest and charm of classic materials such as wood and tile. But things have changed. Today, asphalt shingles are sold in many textures, grades, and styles that are reasonably convincing at mimicking the look and character of traditional materials. The Advantage of fiberglass asphalt shingle 1. Economic The cost of asphalt shingles is lower than many other roofing tiles, and the related charge for transportation and installment is reduced much because they are lightweight and easy to install. 2. Lightweight and easy to install The weight of asphalt shingles is much less weight compared with other roofing materials, so it reduces the requirement for load-bearing support of roofing. And the process of installment is easy, there are no special accessories are required and it is easy to cut, fasten and fit. Asphalt shingles are considered the easiest roofing materials to install. 3. Wide application Asphalt shingles could be used for more wide-angle roofing slopes than other roofing materials, it could be used for a 15°- 90° roofing slope. It also could be used in any shape of the roofing and there are many colors to choose. 4. Noise reduction and heat insulation The stone chips could reduce the noise when it is raining or hailing, it also could insulate from heat when exposed to extreme UV and keep warm in Winter.
Long Span Roofing Sheet Long Span Roofing Sheets are a type of roofing material designed with extended lengths to cover large areas with minimal joints or overlaps. These sheets are widely used in residential, commercial, and industrial buildings due to their durability, ease of installation, and cost-effectiveness. Benefits: Wide Coverage: Fewer joints minimize water leakage and enhance structural integrity. Durability: Resistant to harsh weather conditions such as rain, wind, and UV rays. Lightweight: Despite their strength, these sheets are lightweight, reducing the load on the structure. Versatile Applications: Suitable for roofs, walls, and cladding in warehouses, factories, homes, and more. Aesthetic Appeal: Available in a variety of colors and finishes to match architectural styles.
We are the supplier of PEB Sheds, Roofing Sheets. We are engaged in offering the MS Corrugated Roofing Sheets to our clients. Made from the best quality cold rolled sheet. Descriptions: Thickness 0.30 mm Surface Treatment Galvanised Color Silver Usage/Application Roofing Brand TATA/Jindal/Bhushan Steel Material Iron Specifications:0.60mm 24gauge Type: Roofing Sheet Material: Galvanized Corrugated Steel Size: As per Client Requirement Thickness: 0.13-2.0mm Tolerance: "+/-0.02mm Spangle: Regular, Minimal, Zero, Big Width: 600-1000mmTata make
We are the supplier of PEB Sheds, Roofing Sheets. We are engaged in offering the MS Corrugated Roofing Sheets to our clients. Made from the best quality cold rolled sheet. Descriptions: Thickness 0.30 mm Surface Treatment Galvanised Color Silver Usage/Application Roofing Brand TATA/Jindal/Bhushan Steel Material Iron Specifications:0.60mm 24gauge Type: Roofing Sheet Material: Galvanized Corrugated Steel Size: As per Client Requirement Thickness: 0.13-2.0mm Tolerance: "+/-0.02mm Spangle: Regular, Minimal, Zero, Big Width: 600-1000mmTata make
DRAGON TEETH ASPHALT SHINGLE Length:1000mm±3mm Width:333mm±3mm Thickness:2.6mm±0.1mm Pack:21pieces per bundle Sq.m/Bundle:3.10 square meter per bundle Weight:23kg per bundle ±1kg The Advantage of Dragon Teeth Asphalt Shingle 1.Economic The cost of asphalt shingle is lower than many other roofing tile,and the related charge for transportion and installment are reduced much because of light weight and easy installment. 2.Light weight and easy to install The weight of asphalt shingle is much less weight compared with other roofing material,so it reduce the requirement for load-bearing support of roofing. And the process of installment is easy,there are no special accessories are required and it easy to cut, fasten and fit.Asphalt shingles are considered the easiest roofing materials to install. 3.Wide application Asphalt shingle could use for more wide-angle roofing slope than other roofing material,it could be used for 15°-90° roofing slope.It also could be used in any shape of the roofing and there are many colors could for choice. 4.Noise reduction and heat insulation The stone chips could reduce the noise when raining or hailing,it also could insulate from heat when expose to extremely UV and keep warm in Winter.
Standard Gypsum Board is mainly made from building gypsum with an appropriate amount of lightweight material, fiber-reinforced material, and additives, and is stuck to the paper. It has fire resistance and sound insulation function. Application: Office Building, Restaurant, House, Hospital, Theater, School, Factory, etc. Normal Size: 1220mm 2440mm Thickness: 9mm ~ 12.5mm
Fire Resistant Gypsum Board is mainly made from building gypsum with an appropriate amount of lightweight material, inorganic fireproof fiber material, and additives, and is stuck to the paper. It is the building material that improves the binding force of the core. It has strong fire resistance when used as a partition and ceiling. Application: Office buildings, Restaurants, houses, Hospitals, theaters, Schools, Factories, etc, which require high fire-resistant performance on partitions, steel beams, and ceilings. Normal Size: 1220mm - 2440mm Thickness: 9mm ~ 12.5mm
Moisture Resistant Gypsum Board is mainly made from building gypsum with an appropriate amount of fiber reinforced material and water-proof additives. It is used in moist and semi-exposed places, whose surfaces can be stuck with the tile. Application: Kitchen, Bathroom, Laundry garage, Moist environments, etc. Normal Size: 1220mm -2440mm Thickness: 9mm, 12mm
The Advantage of stone roofing tile 1.Excellent durability and waterproof High-quality aluminum zinc plated steel sheet and natural stone chip coating with acrylic resin glue make stone coated roof tile to superior corrosion resistance and waterproof. The warranty could be last up to 50 years. 2.Lightweight and easy to install The weight of stone coated metal roof tile is only 1/6 of the traditional tile, only 5.20-6.40kgs/sq.m.It is easy to transport, store and install. 3.Economic Because it is lightweight but big size, so it usually just takes 3-5days for 2 workers to finish all the installation for a common residence and related charge of shipment and installation be reduced sharply. 4.Noise reduction and heat insulation The stone chips could reduce the noise when raining or hailing, it also could insulate from heat when exposing to extremely UV and keep warm in Winter.
1.Gypsum Borad (RG), 2.Fire Resistant Gypsum Borad (FR), 3.Moisture Resistant Gypsum Board (WR) 4.4 Sided Tapered Gypsum Board (FX 4TE) 5.Mouldboard - Mould & Moisture Resistant Gypsum Board (MWR) 6.Mouldboard - Mould, Moisture & Fire Resistant Gypsum Board (MWFR)
Pressed Steel Roofing Tiles Pressed steel roofing tiles are a type of roofing material that is made from galvanized steel. The steel is stamped into a tile shape using a press machine, hence the name "pressed steel." The resulting tiles are then coated with a protective layer of paint or other material to make them more durable and weather-resistant. Pressed steel roofing tiles are popular because they are lightweight, strong, and easy to install. They are also fire-resistant, and can withstand extreme weather conditions such as heavy rain, strong winds, and hailstorms. They come in a variety of colors and designs, and can be made to look like other materials such as clay or slate.
Shingle roofing is a type of roofing material that is commonly used for residential and commercial properties. Shingles are typically made of asphalt, but they can also be made from wood, slate, metal, or other materials. The shingles are arranged in overlapping rows, which creates a barrier that protects the roof from the elements. Shingle roofing is popular because it is relatively affordable, durable, and easy to install. Additionally, shingles come in a wide range of colors and styles, making it easy to match the roofing to the overall aesthetic of the building.
7090 Evapoative Media for Green House Color: Light Yellow,Blue, Green, Brown Material: Macrofiber, Kraft Paper Evaporation Efficiency: 85% Size: Custom-made
Vinh Tuong - Gyproc Gypsum Plaster is a NON-Cracking Plastering product to replace the conventional sand - cement surface finishes, helps to build faster by optimizing preparation time and installation. The product is good for plastering on a wide variety of interior solid background types including concrete, red brick, brickwork and lightweight concrete panels/block. FEATURES Better crack resistance than conventional cementitious plaster. Buildable the thickness from 5mm - 15mm onto concrete, unburnt bricks/panel ie. AAC, ALC, lightweight panels. Provide an even, high quality, and durable surface, preventing the hollow sound issue. Excellent adhesion to the wall surface. Correcting irregularities on backgrounds or imperfections from cracking or uneven surfaces & fewer repair steps required (repair cost). Fast project completion thanks to fewer preparation steps during application and ease of application. COMPOSITION Gypsum powder (more than 60%) and active additives to enhance product performance following the EN 13279 Standard. IDENTIFICATION AND PACKING Gypsum Plaster is packed in PP bags, including the cover printed with product image, safety instructions, batch number, date of manufacture, UOM, correspondence address and application instructions.
Gyproc Moisture Resistant Board is a gypsum board with water repellent additives at the core, encased in a special green paper liner. The gypsum compound and papers are mixed with special substances to specifically increase moisture resistance and non-combustible. These boards are highly suitable as bases for ceramic tiling and marble in intermittent moisture areas such as bathrooms or kitchens, and also external soffits in sheltered positions. Made from 100% natural gypsum, Gyproc Moisture Resistant Board is produced with leading-edge technology with high quality and international standards recognition. Key facts Water absorption: < 5% w/w (ASTM C1396) Flammability: non-combustible material (QCVN 06-2010 and EN ISO 1182) Thermal conductivity: K = 0.16 - 0.17 (W/m.K) (QCVN 09: 2013) Benefits Extra moisture resistance property Lightweight material Quick and easy installation Does not produce toxic fumes or hazardous substances that are harmful to health Highly flexible in creating the highest standards of design Easily decorated with paint, tiles, wallpaper, etc. Easy to bend to create unique design ideas Application Suitable for ceilings (with 9mm thickness) and drywalls (with 12.5mm thickness) of private houses, hotels, and commercial centeres... Suitable as a base for ceramic tiling of wet use areas, such as bathrooms and kitchens. Also used for external soffits in sheltered positions Manufacturing Standards TCVN 8256:2009 European Standard EN 520:2004 American Standard ASTM C1396-14A Board color Light green face paper Green endtape
