Surface roughness :0.4-0.1
Surface treatment of hardness up hrc60
Straightness; 0.15/1000mm
Circle of tolerance; gb1184 9grade
Chrome thickness:according to user requirements
Full-length size tolerance; gb1100itgrade
Material;according to user requirements
Axis of hardness; hb220-280
Availability status ;not dealing with the surface, surface chrome or nickel phosphorus and nitrogen surface salt spray
Note:for special specifications, call(letter)custom.
Surface roughness: 0.4-0.1
Surface treatment of hardness hrc60grade
Straightness: 0.15/1000mm
Circle of tolerance: gb1184 9grade
Chrome thickness:according to user requirements
Full-length size tolerance: gb1100itgrade
Material:according to user requirements
Axis of hardness: hb220-280
Availability status:not dealing with the surface, surface chrome or nickel phosphorus and nitrogen surface salt spray
Note:for special specifications, call(letter)custom.
Specifications: 6-12 16-25 30-50 55-100 105-1200
Length: 200-2000 200-3000 200-5000 200-10000 1000-10000
Surface roughness: 0.4-0.1
Surface treatment of hardness:up hrc60
Straightness: 0.15/1000mm
Circle of tolerance: gb1184 9
Chrome thickness:according to user requirements
Full-length size tolerance: gb1100itgrade
Material;according to user requirements
Axis of hardness; hb220-280
Availability status:not dealing with the surface, surface chrome or nickel phosphorus and nitrogen surface salt spray
Note:for special specifications, call(letter)custom.
Specifications; 6-12 16-25 30-50 55-100 105-1200
Length: 200-2000 200-3000 200-5000 200-10000 1000-10000
Surface roughness: 0.4-0.1
Surface treatment of hardness:up hrc60
Straightness; 0.15/1000mm
Circle of tolerance: gb1184 9grade
Chrome thickness:according to user requirements
Full-length size tolerance ;gb1100it
Material:according to user requirements
Axis of hardness: hb220-280
Availability status:not dealing with the surface, surface chrome or nickel phosphorus and nitrogen surface salt spray
Note:for special specifications, call(letter)custom.
Surface roughness: 0.4-0.1
Surface treatment of hardness: up hrc60
Straightness; 0.15/1000mm
Circle of tolerance gb1184 9grade
Chrome thickness:according to user requirements
Full-length size tolerance: gb1100itgrade
Material:according to user requirements
Axis of hardness: hb220-280
Availability status:not dealing with the surface, surface chrome or nickel phosphorus and nitrogen surface salt spray
Note:for special specifications, call(letter)custom.
Oee offers a full line of pistons for duplex and triplex mud pumps. All api types are available. Among these are:
1. Bonded rubber pistons
2. Premium bonded urethane pistons
3. Pistons with replacement rubbers
Bonded rubber pistons are fully interchangeable with other api standard desig0ned pistons and delivery maximum performance in almost all drilling conditions. High tensile strength, resistance to chemicals, hydrocarbons, and abrasion, long lasting service, and full interchangeability with other api designed pistons make our premium piston a sound value.
Bonded urethane pistons have no joints to leak. But eliminates abrasive fluids between piston and liner. The fluid expanded lip is not damaged by high pressure and fast pump strokes. This fail-safe piston seals off to greater diameter as liner wears.
Premium bonded urethane pistons apply in standard environment with the longest service life of more than 500 hours, and piston hub has the longest service life of more than 450 hours.
Pistons with replacement rubbers will run in higher-pressure, fast stroking pumps, and is resistant to oil base muds and other additives currently being used. This one piece bonded unit provides the same series of advantages, being impervious to oil and other chemicals.
Normal Standard
All pistons are produced by imported acrylonitrile butadiene
rubber which suit for ordinary drilling environment under the
maximum working pressure 20MPa. The maximum working
temperature of our piston is up to 120 íµ and it is with
excellent wear resistance and good chemical corrosion
resistant .The service life of the piston can reach 280 hours
in ordinary drilling working environment.
Strength Enhanced
The material of this kind of pistons is high-intensity
acrylonitrile butadiene rubber which supplied by American
Dupont company and Japanese Zeon company. This kind of
pistons is with good oil and wear resistance as well as super
comprehensive strength, which applied to oil-based mud and
higher silt content working environment under the maximum
working pressure 35MPa as well as at the maximum working
temperature 120íµ
Normal Standard
All pistons are produced by imported acrylonitrile butadiene
rubber which suit for ordinary drilling environment under the
maximum working pressure 20MPa. The maximum working
temperature of our piston is up to 120 íµ and it is with
excellent wear resistance and good chemical corrosion
resistant .The service life of the piston can reach 280 hours
in ordinary drilling working environment.
Strength Enhanced
The material of this kind of pistons is high-intensity
acrylonitrile butadiene rubber which supplied by American
Dupont company and Japanese Zeon company. This kind of
pistons is with good oil and wear resistance as well as super
comprehensive strength, which applied to oil-based mud and
higher silt content working environment under the maximum
working pressure 35MPa as well as at the maximum working
temperature 120íµ
Has real manufacturing ability. Besides its own manufacturing headquarters, company possesses foundries and major component factories. In addition to qualified management, skilled technicians and workers, company takes pride in many good manufacturing and testing machines, such as taiwan vm-s series standing comprehensive processing machine center, u.S.A. H hardinge precision numerically controlled lathes, uk turbo technical high speed center balancing machine and so on, and this provides company with a guarantee to its advanced manufacturing mode and quality management. In order to produce ceramic-seeped turbocharger on a large scale, company has been classified, qualified and certified in 2004 with gb/t19001-2000 idt iso 9001-2000.
Pistons are available with various diameters ranging from 35 mm to 120 mm for combustion engines of all types and sizes with complicated crown shapes used in the automotive markets.
