Plug straightly slip ring is also known as connect directly slip ring or plug-in slip ring.It is also called thermocouple slip ring or thermal resistance slip ring according to practical use.
The H series slip rings are compact, cost effective, mercury free, designed for industrial manufacturing.Standard H3 has three rings, each is able to carry 7 amps. H series slip rings overcome mercury slip ring's disadvantages of not environmental protection and use on environment-demanding. Advanced technology and reliable structure, maximum utilization of contact materials realize the highest performance but low cost.Standard terminals fit to quickly install.
This product is fully compatible with Moog P4 slip ring and can also replace mercury slip ring M330,A3H, etc.
They are best applicable in the food production industry and packaging industry.
A.)Outline:
B.)Specification:
Voltage: 240V AC/DC
Current Rating:7A/Ring
Speed:400PRM
Insulation Resistance:200M@500VDC
Dielectric Strength:AC 600V@60Hz, 60S
Electrical Noise:10 milliohms MAX @5rpm,50milliamps,DC
Contact Material:Precious metal
Operate Temp: -20+80
Storage Temp:-30+85
C.)Feature:
Mercury free;
Reliable & rotational connections for power, signal and data transmission;
Speeds up to 400rpm;
Fast mounting.
D.)Application:
Rotary tables and rotary sensors;
Robots;
Test equipment;
Exhibit / display equipment;
Heated rollers;
Food manufacturing machine;
Automation equipment;
Packaging machine.
E.)Option:
Higher voltage and current;
Higher speed;
Wider range of temperature;
Higher protection class;
Layout & size of terminals can be customized;
Flange for installation.
HS-FA2X1/2-S24-SF hybrid slip ring is designed to setup at the end of shaft or side of the machine, fit to pass fluid +signal or low current power. It is set in the body of rotary joint, the wire of rotor will lead out from the center. Stator side has flanges for setup.(More product information welcome to visit slipring.net.)
Feature:
1) High quality bearing on both sides of shaft for smoothly operating;
2) No need to maintain;
3) High quality sealing materials for long life circle;
4) Special shaft provides an excellent wear resistance;
5) Al, Bass, stainless steel body for option;
6) Specially designed leak detection holes;
7) Stator side has flanges for setup.
Technical spec:
Speed
200Rpm
Operate temperature
-30,90
protect degree
IP65
Housing
Al alloy
1. PCB / Flat / Pancake Slipring
2. Ultra thin, thickness can reach 6mm, solve the ilmit height space rotation transmission signal current
3. Disk slipring with shrapnel precious metal contacts, contact more stable
Slip rings also called a rotary electrical interface, Slip Ring Assemblies, Rotary Connector, Slip Ring Units.It can improve electromechanical capability, simplify system design, eliminate possible damage while rotation. Its the key apparatus of various precision rotary worktable, electric test instrument, manufacture and process control instrument.
The TH038 uses JARCH's fiber brush technology which offers several advantages over conventional slip ring contacts including multiple points of contact per brush bundle, low contact force and low contact wear. It provides an economical, readily available solution when a compact through-bore configuration is required. This unit provides a 6.0mm through-bore for routing hydraulic or pneumatic lines. The 2~5 amps /circuit are available in 1-24 ring.
The TH038 uses JARCH's fiber brush technology which offers several advantages over conventional slip ring contacts including multiple points of contact per brush bundle, low contact force and low contact wear. It provides an economical, readily available solution when a compact through-bore configuration is required. This unit provides a 6.0mm through-bore for routing hydraulic or pneumatic lines. The 2~5 amps /circuit are available in 1-24 ring.
In certain applications where a cylindrical shape slip ring will simply not fit into the available space or a very low profile is needed, a pancake or platter style slip ring can be used. The SNK012, with 20mm thickness and hol size 12.7mm, uses SenRing's fiber brush technology which offers several advantages over conventional slip ring contacts including multiple points of contact per brush bundle, low contact force per fiber and low contact wear rates
The PS065, with 2 ~ 24 circiuts and compact 5mm body thickness, which we call our disk slip ring .
Benefits:
Longer lead lengths available
Power and signal combinations
Rotor and stator lead exits
gold alloy brush,Gold plated rings
IP65 are optional
More thickness available
Slip rings can be used in any electromechanical system that requires unrestrained, continuous rotation while transferring power or data from a stationary to a rotating structure.
JARCH HY Series Pneumatic Electrical Rotary Union Support 2-24 passage way Pneumatic/Hydraulic, it can combine with power,signal,Ethernet,USB,Devicenet,Control Net,Canbus on request. It also could be mounted by shaft or optional flange mounting.Passage media types can use Air/Gas, Chemical, DI / Tap Water, Oil, Water/Glycol.
The JSR-HY050-4E-2L provide 2 passage 1" hydraulic oil, combine 2~ 36 circiuts Power and singnal or Ethernet electrical slip ring.The slip ring provide a rotary flange can be install on a rotary table.
· Unique signal handling performance with minimal electrical circuit noise
· Tight packaging to fit in the most demanding space constraints
· Fully compatible with both analog and TTL control level signals
· Precision ball bearings for long life
· Sealed units available,IP67 optional
· Rugged anodized aluminum construction
· Low Cost ,Preferential prices
Slip rings can be used in any electromechanical system that requires unrestrained, continuous rotation while transferring power or data from a stationary to a rotating structure.
It is also called a rotary electrical interface, Slip Ring Assemblies, Rotary Connector, Slip Ring Units. It can improve electromechanical capability, simplify system design, eliminate possible damage while rotation. Itâ??s the key apparatus of various precision rotary worktable, electric test instrument, manufacture and process control instrument.
Slip rings can be used in any electromechanical system that requires unrestrained, continuous rotation while transferring power or data from a stationary to a rotating structure.
It is also called a rotary electrical interface, Slip Ring Assemblies, Rotary Connector, Slip Ring Units. It can improve electromechanical capability, simplify system design, eliminate possible damage while rotation. Its the key apparatus of various precision rotary worktable, electric test instrument, manufacture and process control instrument.
Slip rings can be used in any electromechanical system that requires unrestrained, continuous rotation while transferring power or data from a stationary to a rotating structure.
The HE025 support 4 channel 1000M baseT ethernet slip rings, with through bore size 25.4mm(1.0"), overall diameter 78mm, are standard, off-the-shelf, Color-coded lead wires are used on both the stator and rotor for simplified electrical connections.
Slip rings can be used in any electromechanical system that requires unrestrained, continuous rotation while transferring power or data from a stationary to a rotating structure.
High-current slip ring series are characterized by higher current, adopt specific design and advance technology to meet different application requirements. At present, this series we produced could be up to 800 amperes current. Please let me know your requirements, we will provide the best solution for you.
The JSR-BC060-3P200-15S provides 2 Circuits 400VDC 200A , and 15 circuits 24V 2A control signal .The Slip ring assemblies use carbon conduction , IP66 protection is optional .
Slip rings can be used in any electromechanical system that requires unrestrained, continuous rotation while transferring power or data from a stationary to a rotating structure.
It is also called a rotary electrical interface, Slip Ring Assemblies, Rotary Connector, Slip Ring Units,It can improve electromechanical capability, simplify system design, eliminate possible damage while rotation. Its the key apparatus of various precision rotary worktable, electric test instrument, manufacture and process control instrument.
Slip rings can be used in any electromechanical system that requires unrestrained, continuous rotation while transferring power or data from a stationary to a rotating structure.
It is also called a rotary electrical interface, Slip Ring Assemblies, Rotary Connector, Slip Ring Units. It can improve electromechanical capability, simplify system design, eliminate possible damage while rotation. Its the key apparatus of various precision rotary worktable, electric test instrument, manufacture and process control instrument.
Slip rings can be used in any electromechanical system that requires unrestrained, continuous rotation while transferring power or data from a stationary to a rotating structure.
It is also called a rotary electrical interface, Slip Ring Assemblies, Rotary Connector, Slip Ring Units.It can improve electromechanical capability, simplify system design, eliminate possible damage while rotation. Its the key apparatus of various precision rotary worktable, electric test instrument, manufacture and process control instrument.
