Origin: Vietnam
Packing: in new galvanized steel drum;
225kg/drum
Loading: - 80 drums in container 20' with pallets
- 88 drums in container 20' without pallets
Specifications: same as the attached test report
UNIT PRICE
FOB HAIPHONG PORT
(USD/MT) 1450
Payment: - T/T 30% deposit and 70% balance when get bill of lading.
- L/C at sight
Delivery time: after 7 days from the date of deposit or date of L/C
Thanks for your kindly co-operation and look forward to your soonest reply.
We Are One Of The Biggest Suppliers/Manufacturers Of Coating Resin In Indonesia
Long Oil Alkyd Resin
---------------------------------
Name of Product Type of Oil - Oil Length (%) - PA Content (%) - Solvent - NV (�±2%) Viscosity Gardner (25C) - Color Gardner - Acid Value - Features - Main Uses
------------------------------------------------------------------------------------------------------------------------------------------------
Inakyd 1116-M-70 Soyabean Oil 60 27 SMT 70 Z2-Z5 Max.10 Max.10 Good build, Durabable Primer, Marine, Decorative & Architectural Paints
Inakyd 1117-100 Soyabean Oil 73 13 N/A 99 Z1-Z3 Max.7 Max.10 Fast Drying, Excellent Gloss & Good Pigment Dispersibility For printing ink & Paint
Inakyd 1126-M-70 Soyabean Oil 64 24 SMT 70 Z2-Z4 Max.6 Max.10 Good Build, Durable, Color retention Primer, Marine, Decorative & Architectural Paints
Inakyd 1236-M-70 Soyabean F.A. 62 25 SMT 70 Z6-Z8 Max.5 Max.10 Good Build, Durabable, Color retention & Gloss Decorative Enamel White & Architectural Paints
Inakyd 1236-M-65 Soyabean F.A. 62 25 SMT 65 Z3-Z5 Max.5 Max.10 Good Build, Durabable, Color retention & Gloss Decorative Enamel White & Architectural Paints
Inakyd 1236-M-80 Soyabean F.A. 62 25 SMT 80 Z7-Z9 Max.5 Max.10 Good Build, Durabable, Color retention & Gloss Decorative Enamel White & Architectural Paints
Inakyd 1255-M-80 Soyabean F.A. 56 28 SMT 80 Z6-Z8 (70%in SMT) Max.3 Max.12 Good Build, Color retention, Fast Drying, Durability & Gloss Decorative Enamel White & Architectural Paints
Inakyd 1326-M-70 Linseed Oil 65 24 SMT 70 Z5-Z7 Max.7 Max.10 Hard, Fast drying, Weather resistance Primer & Architectural Paints
Resin trap filter for water treatment are very important. Like insurance that protects you, your home or business, resin traps ensure that your industrial water equipment will not suffer any partial or total loss of media in the event of any failure.
Resin trap strainers are simple and low-cost protection devices typically installed in activated carbon and ion exchange units, media filters, and service outlets and backwash lines at the outlet of high-purity water systems.
The wedge wire resin trap screen ensures that the filter media or ion exchange resin does not escape from the water treatment unit it actually belongs to, but can flow downstream where it is not needed.
Bluslot is one of the leading resin trap filter nozzles manufacturer companies and they are known for producing high quality plastic and stainless steel resin traps. The company is a well-known supplier of thermoplastic filter nozzles for water treatment for over 30 years, and resin trap filter are part of its product range.
Polyvinyl chloride resin is widely used in production of polyvinyl chloride boardy leatheroid, paint and adhesive agents,tec. Paint and adhesive .
Sg3 is used to make ordinary soft products, such as: wire, plastic sandals, film, packaging bag, hose, toys, crafts, auto parts, foam plastic etc.
Sg5 is a universal resin, which can be used to produce foaming materials, pipes, profiles, boards etc.
Sg7 is used for the production of hard products, production of sheet, sheet, such as: doors and Windows, flooring, furniture, decorative materials, wood products etc.
Sg 8 is used to produce hard products such as sheet, sheet, pipe fittings, etc.
SCG08 is a premium grade Gel type strong acid cation exchange resin, sodium form, with crosslinking8% DVB , which is produced by sulfonated styrene-DVB copolymer
The particle size is in standard gaussian distribution with 0.315-1.25mm >95%.
SCG08 shows excellent mechanical strength and good ion exchange kinetics, SCG08 in hydrogen form is widely used for water deminerazation to reduce the ions.
SCG08 in sodium form is fit for common mixed bed system, which is one of the most cost-efficient system to remove anion & cation from water.
Ion exchange resin for water treatment
Gel type strong acid cation exchange resin is used in water demineralization
SCG08 is a premium grade Gel type strong acid cation exchange resin, with crosslinking 8% DVB , which is produced by sulfonated styrene-DVB copolymer.
The particle size is in standard gaussian distribution with 0.315-1.25mm >95%.
SCG08 shows a better oxidative stability and a better regeneration efficiency than SCG07, so SCG08 in hydrogen form is intended for demineralization use in mixed beds.
Equal to Amberlite IR120h, Purolite C100
Basic feature
Application:Mixed bed system for water demineralization
Matrix:ST-DVB
Type: Gel
Functional group:sulphonic acid
Ionic form: hydrogen & sodium form
Appearance:amber Spherical beads
Physical and Chemical Characteristics
1 Total exchange capacity (eq/L) Na+ form â?¥1.9
2 Moisture retention (%) Na+ form 47-56
3 Particle size range (%) 0.315-1.25 mm â?¥95
4 Whole beads count (%) â?¥95
5 Shipping weight (g/ml) Na+ form 0.75-0.85
6 Specific gravity (g/ml) Na+ form 1.15-1.24
7 Uniformity coefficient
Gel type strong acid cation exchange resin is used in water demineralization
SCG08 is a premium grade Gel type strong acid cation exchange resin, with crosslinking 8% DVB , which is produced by sulfonated styrene-DVB copolymer.
The particle size is in standard gaussian distribution with 0.315-1.25mm >95%.
SCG08 shows a better oxidative stability and a better regeneration efficiency than SCG07, so SCG08 in hydrogen form is intended for demineralization use in mixed beds visit iex-resin.com for details.
Equal to Amberlite IR120h, Purolite C100
Basic feature
Application:Mixed bed system for water demineralization
Matrix:ST-DVB
Type: Gel
Functional group:sulphonic acid
Ionic form: hydrogen & sodium form
Appearance:amber Spherical beads
Physical and Chemical Characteristics
1 Total exchange capacity (eq/L) Na+ form â?¥1.9
2 Moisture retention (%) Na+ form 47-56
3 Particle size range (%) 0.315-1.25 mm 95
4 Whole beads count (%) 95
5 Shipping weight (g/ml) Na+ form 0.75-0.85
6 Specific gravity (g/ml) Na+ form 1.15-1.24
7 Uniformity coefficient
A properly designed and purified catalysts can obtain faster process times, better yields and higher product purity. Bojietech Catalysts are easy to handle and show a low degree of corrosivity. They are the catalysts of choice for some large markets such as fuel ethers, and bisphenol A. Catalysts are supplied either completely water-swollen, or dried to specification.
Amber colored low cost mixed bed for EDM.Suzhou X Chemical offers a complete line of EDM resins ready to use mixed bed and separate component versions specifically designed to meet the needs of the EDM market. The ratio of component resins has been specifically tailored for full demineralization of water to provide the maximum throughput of water of the highest quality. It is suitable for use in regenerable or non-regenerable cartridges and other suitable vessels.
Industrial grade high capacity resin for removal of radium.Radioactive contaminants include radon (an inert gas), radium (a radioactive cation similar to hardness ions) and uranium (almost always present as a radioactive anion). Suzhou X Chemical provides products for all three contaminants. These products are WQA certified ANSI/NSF 61 standard for minimal leachables
high capacity highly regenerated, low sodium hydrogen form cation resin."Condensate Polishing is normally applied to the treatment of condensed steam from turbines operating in the power industry. It is a specialty application where ion exchange resins are used for removal of corrosion transport products as well as removal of trace ionic impurities. This requires the use of resins that have excellent filtration characteristics as well as ion exchange capacity, and that can withstand the high temperatures and flow rates encountered in condensate systems.
Polishing resins must also have low levels of both organic and ionic impurities such that they do not leach any objectionable contaminants into the treated water
Suzhou X Chemical offers a variety of coarse grade and uniform particle size resins specifically for condensate polishing, including highly crosslinked resins with excellent thermal stability. These resins are available in a variety of ionic forms such as ammonia and amine forms for cation resin and hydroxide form for anion resin, suitable for immediate use without preconditioning or regeneration.
"
Overview
Quick Details
CAS No.:
0
Other Names:
Light curing resin
MF:
0
EINECS No.:
KS-3852C
Place of Origin:
Guangdong, China
Type:
Synthetic Resin And Plastics
Brand Name:
KS
Model Number:
KS-3852C
Purity:
0
Color:
Red
Weight:
1000g
Material:
UV resin
Liquid Density:
1.08-1.2
Elongation at Break:
22%
Wavelength:
395-405
Curing time:
3-5s
Shrinkage:
100
Est. Time(days) 5 To be negotiated
Product Description
3D Printer Resin 405nm SLA UV Curing Resin with High Precision and Quick Curing Excellent Fluidity for LCD 3D Printing
Model No. KS-3852C
Color Red
Weight 1000g
Material UV resin
Hardness Shore D 85D
Viscosity (25�°C) (cps) 300
Liquid Density 1.08-1.2
Extension Strength (mpa) 37.9mpa
Elongation at Break % 22%
Wavelength (nm) 395-405
Curing time (s) 3-5s
Shrinkage %
Overview
Quick Details
CAS No.:
0
Other Names:
Light curing resin
MF:
0
EINECS No.:
KS-3852C
Place of Origin:
Guangdong, China
Type:
Synthetic Resin And Plastics
Brand Name:
KS
Model Number:
KS-3852C
Purity:
0
Color:
Red
Weight:
1000g
Material:
UV resin
Liquid Density:
1.08-1.2
Elongation at Break:
22%
Wavelength:
395-405
Curing time:
3-5s
Shrinkage:
100
Est. Time(days) 5 To be negotiated
Product Description
3D Printer Resin 405nm SLA UV Curing Resin with High Precision and Quick Curing Excellent Fluidity for LCD 3D Printing
Model No. KS-3852C
Color Red
Weight 1000g
Material UV resin
Hardness Shore D 85D
Viscosity (25�°C) (cps) 300
Liquid Density 1.08-1.2
Extension Strength (mpa) 37.9mpa
Elongation at Break % 22%
Wavelength (nm) 395-405
Curing time (s) 3-5s
Shrinkage %
Overview
Quick Details
CAS No.:
0
Other Names:
Light curing resin
MF:
0
EINECS No.:
KS-3852C
Place of Origin:
Guangdong, China
Type:
Synthetic Resin And Plastics
Brand Name:
KS
Model Number:
KS-3852C
Purity:
0
Color:
Red
Weight:
1000g
Material:
UV resin
Liquid Density:
1.08-1.2
Elongation at Break:
22%
Wavelength:
395-405
Curing time:
3-5s
Shrinkage:
100
Est. Time(days) 5 To be negotiated
Product Description
3D Printer Resin 405nm SLA UV Curing Resin with High Precision and Quick Curing Excellent Fluidity for LCD 3D Printing
Model No. KS-3852C
Color Red
Weight 1000g
Material UV resin
Hardness Shore D 85D
Viscosity (25�°C) (cps) 300
Liquid Density 1.08-1.2
Extension Strength (mpa) 37.9mpa
Elongation at Break % 22%
Wavelength (nm) 395-405
Curing time (s) 3-5s
Shrinkage %
CAS No.: 0
Other Names: Light curing resin
MF: 0
EINECS No.: KS-3981
Place of Origin: Guangdong, China
Type: Synthetic Resin And Plastics
Brand Name : KS
Model Number: KS-3981
Purity: 100
Color: Green
Weight: 1000g
Material: UV resin
Liquid Density: 1.05-1.1
Elongation at Break: 30-50%
Wavelength: 395-405
Curing time: 1.5-3s
Shrinkage: 50
Est. Time(days) 6 To be negotiated
KS-3981
Suitable for casting resin,applied to all kinds of jewelry, ornaments, and large size casting products.
Characteristics.
I00% no residual ash burnout,it can be cast directly.
With the combination of toughness and hardness, the printing of large-size cast products will not collapse.
The maximum casting temperature is 730-750 degrees, which completely replaces the traditional process.
�·Perfect casting quality and reduce surface polishing time.
This special resin can be used for any type of DLP and LCD curing 3D printer.
Product Description
Model No. KS-3981
Color Green
Weight 1000g
Material UV resin
Hardness Shore D 85D
Viscosity (25C) (cps) 200-350
Liquid Density 1.05-1.1
Extension Strength (mpa) 15-25mpa
Elongation at Break % 30-50%
Wavelength (nm) 395-405
Curing time (s) 1.5-3s
Shrinkage % 1%
Shelf Life One year
CAS No.: 0
Other Names: Light curing resin
MF: 0
EINECS No.: KS-3860
Place of Origin: Guangdong, China
Type: Synthetic Resin And Plastics
Brand Name: KS
Model Number: KS-3860
Purity: 100
Color: White
Weight: 1000g
Material: UV resin
Liquid Density: 1.02-1.2
Elongation at Break: 30%
Wavelength: 395-405
Curing time: 3-5s
Shrinkage: 100
Est. Time(days) 5 To be negotiated
Product Description
Model No. KS-3860
Color White
Weight 1000g
Material UV resin
Hardness Shore D 85D
Viscosity (25�°C) (cps) 100-150
Liquid Density 1.08-1.2
Extension Strength (mpa) 32mpa
Elongation at Break % 30%
Wavelength (nm) 395-405
Curing time (s) 3-5s
Shrinkage %
