Butanol (Technical Grade) PRODUCT CODE 2051 DESCRIPTION C4/C5 alcohol distillation cut. Appearance ASTM E2680 Colour Pt-Co Clear and bright 5 max ASTM D1209; ASTM D5386 Water mass % 0.10 max ASTM D1364 n-Butanol mass % 60.0 min GC sec-Pentanol mass % 20.0 max GC Total alcohols mass % 99 min GC Carbonyls as propionaldehyde mass % 0.30 max B124 Properties Units Limits Test Methods Density at 20â?? 0.808-0.811 ASTM D4052 Distillation at 101.3 kPa: Initial boiling point Dry point â?? g/ml 115 â?? 118 ASTM D1078 Iso-butanol mass % 12 GC Further Properties Units Typical values Test Methods The sales Specification values are continuously checked, documented and stored within the scope of Quality assurance Further properties are of an informational nature only and are not checked regularly. If the Sales Specifications are complied with; it can generally be assumed that all further properties and typical data Conform to the values given.
Hand made high quality Saman epoxy tables
A properly designed and purified catalysts can obtain faster process times, better yields and higher product purity. Bojietech Catalysts are easy to handle and show a low degree of corrosivity. They are the catalysts of choice for some large markets such as fuel ethers, and bisphenol A. Catalysts are supplied either completely water-swollen, or dried to specification. 25L/bag
CNSL Mortar Cashew CNSL Resin Mortar is widely used for Acid Resistant Bricks/ Tiles lining as bedding and jointing mortar. It can be used for jointing Chemical Resistant Stoneware Pipes. It is also used for ETP Plants. It is suitable where excellent resistant property and heavy impacts subjected to the surface of floors and tank is required. Cashew CNSL mortar adheres strongly on the Ceramic, Concrete surface and metals so, it can be used as a monolithic lining for the construction of dilute acids storage tanks. Resistant It is resistant to Acids, Alkalies, mixed alkaline solutions with acids. Resistant to temperature 170�° C (Max.) Preparation of Mortar Preparation of Mortar generally consists of Solution & Powder. In order to obtain good working consistency, the average mixing ratio is 1 Pbw of Solution & 3 pbw of Powder. This ratio will slightly vary depending upon the temperature and working conditions. Prepare small batches of Mortar. Stirrer the Solution thoroughly before use. Place the Solution in a suitable mixing pan and add powder in it. Mix thoroughly with a spatula or Trowel. The mixing operation shall be continued until a uniform mixture is obtained. Make sure that all the Mortar is used from the mixing pan before another batch is prepared. Surface Preparation The cement plastered surface shall be slightly rough in line & level , dry & clean, free from dust, dirt, grease, oil etc., maintaining required slope etc. as no slope can be adjusted or altered in Acid proof lining works. Setting / Curing Cashew CNSL Resin Mortar is a Self-hardening due to its chemical reaction which occurs when the Powder & Resin are mixed together. An initial setting occurs in 10 hrs. at 30�°C Final Setting occurs in 24 to 48 hrs. at 30�°C Curing time: 7 days at 30�°C Please ensure that no water shall be spilled over the bricks lining works before it completely cured. Storage Life Solution: 12 Months at the temperature 30�°C (+2OC) Powder: 6 Months at the temperature 30�°C (+2OC) All two components are stored in cool and dry place under the roof until ready to use it original unopened (Sealed) containers. Packing Solution: 25 Kg. in M.S. Drum Powder: 25 Kg. in Plastic Bag.
Damar Batu Calcutta Grade Bombay Grade Dust Grade Yellow in color Packaged using dual layer bag with nett weight 50 kgs per bag Loaded into 20ft container for 16MT Shipment schedule weekly 4 containers
Identification Chemical substance: short oil alkyd resin short coconut Specifications Solids content: 70%(� 1%) Color - gardner scale : 2 max (50% solution) Acid number: 10 max.(mg koh/g - solids) Viscosity: 10 max.(mg koh/g - solids) 10-15 poise at 50%(25) Main characteristics oil type: c 12 fatty acid Solvent: mixed xylene Standard applications - nc systems - coating for metal - force air drying - oven drying - primer - top coat
Short Oil Alkyd Resin, which find application in nitrocellu-lose based automotive refinishes as a plasticizer and as a binder for stoving finishes in combination with butylated melamine formaldehyde resin. Key Specifications/Special Features "Solid content: 70± 2% Color â?? Gardner Scale: 2 max (50% solution in Xylene) Acid Number: 15 max.(mg KOH/g â?? solids) Viscosity: 10 â?? 15 Poise at 25°C in 50% Xylene." Minimum Order Size/ Packgaing details 1 FCL (20MT)/ 200 KG BARREL
Product Description : A medium oil alkyd resin is a alkyd binder made with a medium oil to alkyd resin ratio. Price of product ( USD price or FOB price) : $ 1441/MT Product origin : INDIA Key Specifications/Special Features : Solids content: 40� 2% Color - Gardner Scale: 4 max. Acid number: 12 max.(mg KOH/g) Viscosity(at 33% in MTO) : 45-65 seconds in FC4 at 30�1�C Minimum Order Size/ Packgaing details : 1 FCL (20MT)/ 190 KG Barrel
Product Description : NON REACTIVE POLYAMIDE (AKROSYN 9065) Price of product ( USD price or FOB price) : It is a polymeric fatty acid based co solvent soluble Non Reactive Polyamide resin. It is suitable for flexographic and gravure printing inks and over printing lacquers. It is soluble in N-propanol, Iso propanol, N –butanol and mixture of these with aromatic hydrocarbon like toluene and xylene. Product origin : 2059 Key Specifications/Special Features : INDIA Minimum Order Size/ Packgaing details : Appearance : Yellowish Brownish Color - Gardner Scale 10 max. (40% solution in Toluene/Butanol/IPA 1:1:1) Acid Value: 7 max.(mg KOH/g) Amine Value: 7 max.(mg KOH/g) Viscosity @30±1°C B4 Cup 50 – 60 seconds (40% solution in Toluene/Butanol/IPA.1:1:1) Softening Point(B&R) 105 -115 °C
Product Description ; A medium oil alkyd resin is a alkyd binder made with a medium oil to alkyd resin ratio. Price of product ( USD price or FOB price) : $ 1456/MT Product origin : INDIA Key Specifications/Special Features ; Solids content: 70� 2% Color - Gardner Scale: 7 max(50% solution) Acid number: 15 max.(mg Viscosity(at 40%in MTO) : 70 - 90 seconds in FC4 at 30±1°C Minimum Order Size/ Packgaing details: 1 FCL (20MT)/ 190 KG BARREL
Product Description : Short�Oil�Alkyd�Resin, which find application in nitrocellu-lose based automotive refinishes as a plasticizer and as a binder for stoving finishes in combination with butylated melamine formaldehyde resin. Price of product ( USD price or FOB price) : $ 1338/MT Product origin INDIA Key Specifications/Special Features Solids content: 70� 2% Color Gardner Scale 4 max(50% solution in Xylene) Acid number: 20 max.(mg KOH/g - solids) Viscosity: 140 -160 seconds at 30�1�C in B4 Cup 50%in Xylene Minimum Order Size/ Packgaing details 1 FCL (20MT)/ 200 KG Barrel
Product Description: Short Oil Alkyd Resin, which find application in nitrocellu-lose based automotive refinishes as a plasticizer and as a binder for stoving finishes in combination with butylated melamine formaldehyde resin. Origin: INDIA Key Specifications: "Solid content: 70± 2% Color â?? Gardner Scale: 2 max (50% solution in Xylene) Acid Number: 15 max.(mg KOH/g â?? solids) Viscosity: 10 â?? 15 Poise at 25°C in 50% Xylene." Minimum Order Size/ Packgaing details 1 FCL (20MT)/ 200 KG BARREL
Product Description: Iso Cyanate modified single pack Polyurethane Alkyd having excellent gloss,hardness, mar resistance, stain and water resistance.Recomended for wood lacquer also in pigmented air drying top coat Origin: INDIA Key Specifications: "Solids content: 50± 2% Color - Gardner Scale 4 max. Acid number: 5 max.(mg KOH/g) Viscosity: 45-75 seconds in FC4 at 30±1°C(45% solid in MTO) Surface Dry 45 mins max @30°C Hard Dry 2 â?? 3 hours @30°C" Minimum Order Size/ Packgaing details 1 FCL (20MT)/ 180 KG BARREL
Product Description: Short Oil DCO Alkyd Resin Origin: INDIA Key Specifications: "Solids content: 70± 2% Color - Gardner Scale 6 max. (50% Solution) Acid number: 20 max.(mg KOH/g) Viscosity: 140-160 seconds at 30±1°C in B4 Cup 50% in Xylene" Minimum Order Size/ Packgaing details 1 FCL (20MT)/ 200 KG BARREL
Product Description : A medium oil alkyd resin is a alkyd binder made with a medium oil to alkyd resin ratio. Price of product ( USD price or FOB price) : 1456 Product origin : India Key Specifications/Special Features : Solids content: 70± 2% Color - Gardner Scale: 7 max(50% solution) Acid number: 15 max.(mg KOH/g) Viscosity(at 40%in MTO) : 70 - 90 seconds in FC4 at 30±1°C Minimum Order Size/ Packgaing details : 1 FCL (20MT)/ 190 KG Barrel
Product Description : It is compatible with low melting grades of Ketonic resin.Maleic, Rosin modified Phenolic Resin, Sprit soluble Phenolic Resin It is compatible with plasticizers like D.B.P, D.O.P, and low melting grade of polyethylene, paraffin and castor oil based waxes. Price of product ( USD price or FOB price) : $ 1588/MT Product origin : INDIA Key Specifications/Special Features : Appearance: Clear (Visual observation) Colour(Gardner 50% in Xylene) 4 max Solids content: 70� 2% Acid number: 20 max.(mg KOH/g - solids) Viscosity: 100 -140 seconds at 30�1�C At (50% in Xylene) B4 Cup Minimum Order Size/ Packgaing details : 1 FCL (20MT)/ 200 KG Barrel
Product Description : It is a biobased long oil alkyd resin. It has excellent exterior durability, good through drying, high covering power, high gloss, poor absorption to porous substrate & U.V. resistance. It is used in non-yellowing, air-drying, brush applications, exterior coatings, gloss coatings, interior coatings, varnishes, conventional white/pastel enamels & overprint varnishes. Price of product ( USD price or FOB price) : $ 1537/MT Product origin : INDIA Key Specifications/Special Features : Solids content: 60� 2% Color - Gardner Scale: 4 max.(50% solution in MTO) Acid number: 14 max.(mg KOH/g ) Viscosity(50% in MTO): 100-120 seconds in FC4 at 30�1�C Minimum Order Size/ Packgaing details : 1 FCL (20MT)/ 190 KG BARREL
Product Description : It is a pale color hard ketone-aldehyde resin with high alcohol solubility. It is compatible with most binders and soluble in nearly all conventional solvents in field of application. Its high melting point provides improved heat resistance and better blocking resistance. Its high degree of polarity allows for improved adhesion, pigment wetting and gloss. Its faster solvent release property makes it unique.adhesion, pigment wetting and gloss. Its faster solvent release property makes it unique. Price of product ( USD price or FOB price) $1588/MT Product origin INDIA Key Specifications/Special Features Appearance : Bright granules Color - Gardner Scale (50% solution in Ethanol) : 2 max. Acid Value: 1 max.(mg KOH/g) Viscosity @30±1°C B4 Cup (50% solution in Ethanol) : 16 â?? 20 seconds Softening Point(B&R) : 105 - 115 °C Minimum Order Size/ Packgaing details 1 FCL (20MT)/ 25 KG BAG
Product Description GlowPoly 125 is a Medium Viscosity Reactive Polyamide Curing Agent for Epoxy Resin to be used in various applications. Price of product ( USD price or FOB price) $ 2500/ MT Product origin INDIA Key Specifications/Special Features Appearance : Clear Amber to Brownish Liquid olor (CGS) :10 Max Amine Value (Mg KOH/gm) : 280-320 Mixing Ratio with Epoxy Resin (EEW 190) : 65 phr Viscosity @ 40�C by BF : 450-550 P Equivalent weight, approx. : 103 AHEW Minimum Order Size/ Packgaing details 1 FCL (20MT)/ 190 KG BARREL
Product Description It is a polymeric fatty acid based co solvent soluble Non Reactive Polyamide resin. It is suitable for flexographic and gravure printing inks and over printing lacquers. It is soluble in N-propanol, Iso propanol, N ?butanol and mixture of these with aromatic hydrocarbon like toluene and xylene. Price of product ( USD price or FOB price) : $ 2059/MT Product origin INDIA Key Specifications/Special Features : Appearance : Yellowish Brownish Color - Gardner Scale 10 max. (40% solution in Toluene/Butanol/IPA 1:1:1) Acid Value: 7 max.(mg KOH/g) Amine Value: 7 max.(mg KOH/g) Viscosity @30�1�C B4 Cup 50 ? 60 seconds (40% solution in Toluene/Butanol/IPA.1:1:1) Softening Point(B&R) 105 -115 �C Minimum Order Size/ Packgaing details 1 FCL (20MT)/ 25 KG BAG
