Crude oil is a naturally occurring unrefined petroleum product that is made up of a mixture of hydrocarbons and other organic compounds It is the raw material that is used to produce a variety of refined petroleum products including gasoline diesel fuel and heating oil Crude oil is extracted from the earth through drilling and is transported to refineries where it is processed and refined into various products Crude oil has a wide range of physical properties Crude oil is made up of 845 carbon 13 hydrogen 13 sulfur and less than 1 each of nitrogen oxygen metals and salts REBCO is a specific type of crude oil that is produced in Russia and the surrounding regions It is a highquality crude oil that is known for its low sulfur content and low viscosity The middle east light crude oil is also highquality crude oil The GOST 51 8582002 specification refers to the Russian standard for REBCO which outlines the crude oils characteristics and performance requirements Gost 51 858 2002 offers from exporters manufacturers suppliers wholesalers and distributors globally by price and quality of the oil REBCO is an important commodity in the global energy market and it is carefully regulated to ensure that it meets the necessary standards for safety and performance Maximum Sulfur Content 18 Paraffin Content 60 Maximum Water Sediment Content 12 Distillation Weight 21 Up to 200 N min 21 Up to 300 N min 41 Up to 350 N min 50 and Maximum salts content MGL 100
Light Cycle Oil LCO is a diesel boiling range product from fluid catalytic cracking units flexible process to process LCO into desired products such as verylow sulphur diesel and high octane higharomatics naphtha It is a light lubricating oil that is suitable for use on bicycles and similar equipment It is a diesel boiling range product from fluid catalytic cracking units Light cycle oil is a poor diesel fuel blending component LCO are produced at the bottom of the fluidized catalytic cracking FCC process in a refinery and are enriched with 5080 wt heterocyclic aromatic compounds 3 wt S and 600 ppm N
ESPO (Eastern Siberia-Pacific Ocean) oil is a premium blend of crude oil primarily exported from Russia. This light, sweet crude has gained significant traction in the global market. ESPO oil is extracted from fields in Eastern Siberia and transported via the Eastern Siberia-Pacific Ocean pipeline. Pipeline: The ESPO pipeline, stretching from Taishet in Irkutsk Oblast to the Pacific port of Kozmino, facilitates the transportation of this crude. ESPO crude has an API gravity typically around 34-35 degrees, classifying it as a light crude oil. It has a low sulfur content, usually between 0.5% and 0.6%, making it a sweet crude. This low sulfur content is advantageous for refining into high-quality fuels with lower environmental impact. ESPO oil is known for its low metal and salt content, further enhancing its desirability for refineries seeking to produce cleaner fuels. ESPO crude often commands a premium price compared to other Russian crude grades like Urals, due to its superior quality and favorable location. Pricing for ESPO oil is typically benchmarked against Dubai/Oman crude prices. Espo has low sulfur content in ESPO oil translates to lower sulfur dioxide emissions when refined, contributing to reduced environmental impact compared to higher sulfur crude oils. Price: FOB $68/$64 CIF $65/$61 Availability: In Stock Origin: Russia / Kazakhstan. For more details contact us.
Flexitank is an ideal packaging for transporting all kind of Non-hazardous liquid goods such as: Oils, Beverages and Liquid Chemicals by sea,railway and road truck. Our Flexitank has following features: -- Quality Management System ISO 9001 2000, ISO 22000-2005 supervision, -- Food grade materials FDA, EC standard and Kosher Certificated, -- Customized design and Exactly to Your Specification. -- Global Agency Network and Professional Flexitank Services Team. -- World Wide Insurance Products Liability Insurance. -- Met All the COA(Container Owner Association) Recommended Test Criteria for Flexitank. For more information or need any help, plz feel free to contact us. Thanks!!
Base oils are used to manufacture products including lubricating greases, motor oil and metal processing fluids. Different products require different compositions and properties in the oil. Chemical substances additives are added to the base oil to meet the quality requirements for the end products in terms of, for example, friction and cleaning properties.
Origin: Kazakhstan Quantity: One Hundred Thousand (100,000) Metric Tons With R&e Into Yearly Contract Loading Ports: Rotterdam / Houston / Kazakhstan / Fujairah / Jorong Ports Inspection: Sgs for the Quality & Quantity Test Report Insurance: Paid by Seller, Covering 110% of Shipment Value Terms of Selling , Fob , Cif , Tto ,ttv ,ttia
Origin: Kazakhstan Quantity: One Hundred Thousand (100,000) Metric Tons With R&e Into Yearly Contract Loading Ports: Rotterdam / Houston / Kazakhstan / Fujairah / Jorong Ports Inspection: Sgs for the Quality & Quantity Test Report Insurance: Paid by Seller, Covering 110% of Shipment Value Terms of Selling , Fob , Cif , Tto ,ttv ,ttia
Hello Sir/Mam Thanks for the interest in our Crude oil product We are able to supply you on a consistent basis Origin Available 1 Iran 2 Kazakhstan Payment Terms DLC SBLC BG Sblc via MT760 TT MT103 Specification of Iran light crude oil certificate of origin changeable CHARACTERISTICS UNITS RESULT TEST METHOD Specific Gravity1556 1556 08568 ASTM D5002 API Gravity API 336 ASTM D5002 Sulfur Content total Wt 146 ASTM D4294 HS Content ppm 86 IP 570 Mercaptan Content ppm 60 UOP 163 Nitrogen Content total Wt 0l3 ASTM D5762 Water Sediment Vol
Base oils are important basic raw materials for any lubricants included engine oils, gear oils, industrial oils, metal working fluids, hydraulic fluids and also greases. In most of the lubricants 70-90% ingredient is base oils. As per API classification Base oils can be grouped majorly into five groups, i.e., Group-I/II/III/IV/V. The base oil characteristics are very important in determining the quality of the finished product. Group I base oils are solvent-refined, which is a simpler refining process. This is why they are the cheapest base oils on the market.
Base Oil SN 350 is a medium stock base oil produced from the vacuum distillates and residual components using the traditional refining methods. It has viscosity 8-9,5 cSt at 100C and 67-70 cSt at 40C. SN 350 is used in lubricant and lubricant additives production, mainly for industrial applications. The main benefits of SN 350 base oils are low sulphur content, high viscosity index, high oxidation stability and good susceptibility to the additives.
Base Oil SN 500 is defined as a light grade base oil at the upper end of the specifications for Grade I base oils. It is mostly used in lubricant production. It is a Group I base oil which has undergone solvent refining processes. To finish the refining it was hydrogen treated to clear out any impurities. Applications : Base Oil SN 500 works as a base stock for several industrial lubricants Engine oils Transmission fluids Gear oils Metal working fluids Greases Hydraulic oils Transformer oils
Base oil SN 150 is known as a light grade base oil at the lower end of the specifications for Grade I light base oils. It is mostly used in lubricant and lubricant additives production. It is a Group I base oil which has undergone solvent refining processes. To finish the refining it was hydrogen treated to clear out any impurities. Applications : Base oil SN 150 works as a base stock for several industrial lubricants. General purpose oils Mould oil Transmission fluids Gear oils Metal working fluids Additives Hydraulic oils Transformer oils
I'm excited to share that we've recently acquired a mandate for Crude Oil. We're now in partnership with a top-tier supplier, providing access to both Light and Heavy Crude from various countries. Our offerings include CIF and FOB options, with competitive pricing based on Platts (ranging from Minus -4 to Minus -11), which varies with the grade and source location. Our collaboration with a Primary Supplier ensures adherence to strict terms, protocols, and procedures, allowing us to offer favorable terms dependent on the buyer's financial standing. To proceed with a tailored quote, our supplier requires the following documents: * Audited Financial Statements (last 3 years) * W-9 Credit Form for US Companies OR W8/International Credit Information for Non-US Entities * Articles of Incorporation/Organization * Contact details (name, phone, email) for Credit/Billing We're eager to explore the potential of working together. Please let us know if you're interested in receiving a quote. Best regards, Allen Managing Partner, Magnolia Industries
Base oil sn150
Product Name : BURNER OIL/LDO Product Description : Density 0.84-0.87 Price of product ( USD price or FOB price) : CFR MUNDRA /NEVA SHEVA USD 470-520 Product origin : GCC/UAE Key Specifications/Special Features : ON REQUEST Minimum Order Size and Packgaing details : Flexi Containers
Product Name : Furnace Oil Product Description : DENSITY 0.90-0.95 Price of product ( USD price or FOB price) : CFR MUNDRA/NEVASHEVA USD 320-330 Product origin : GCC/UAE Key Specifications/Special Features : ON REQUEST Minimum Order Size and Packgaing details Flexi Containers
Light Crude Oil: Crude oil is a naturally occurring, unrefined petroleum product composed of hydrocarbon deposits and other Organic materials. Distillates Include Naphtha, Light Kerosene and Heavy Kerosene, Gas Oil, MTO and Fuel Oil. Parameter Method Unit Result Appearance - Black Density :150C ASTM D-1298 Kg/L 0.830 Flash Point : ASTM D-93 OC 0 Water Content : ASTM D-95 %vol 0.5 Distillation : ASTM D-86 IBP ASTM D-86 OC 45 10% ASTM D-86 OC 75 20% ASTM D-86 OC 95 30% ASTM D-86 OC 125 40% ASTM D-86 OC 155 50% ASTM D-86 OC 170 60% ASTM D-86 OC 230 70% ASTM D-86 OC 300 75% ASTM D-86 OC 320 Remark: Cracked at 320OC. Total Recovery 75%, Residue 25%
Base oil 150N is defined as a light base oil at the lower end of the specification compared to a Class II light base oil. They are mainly used in the production of lubricating additives and lubricants. . Because it is a Group II base oil, it has undergone hydrocrack treatment steps to remove any impurities.
We are NNPCS official allocation holder, offer real CIF or FOB bonny light crude oil direct from NNPC We sell bonny light crude oil at off OPEC price and we will offer all commission for the buyer side because we are the seller, no any seller side agent Pls contact me, and I will offer my company BLCO proposal to you (including proof of product and SOP) Minimum order:2 Million barrel/vessel WHAT IS BONNY LIGHT CRUDE OIL OR BLCO Bonny Light Crude Oil is a high grade of Nigerian crude oil with high API gravity (low specific gravity), produced in the Niger Delta basin and named after the prolific region around the city of Bonny. The very low sulfur content of Bonny Light crude makes it a highly desired grade for its low corrosiveness to refinery infrastructure and the lower environmental impact of its byproducts in refinery effluent.
BASE OIL SN 100-150-300-500-600-700 Base oil is a type of oil which is used as a base for lubricants. The main element of lubricants (volume wise) is base oil and it forms about 95% of lubricants weight. In some lubricants (Compressor and hydraulic oil) 99% of the oil is consisted of base oil and only the 1% which is left contains additives. Base oils can be reached from oil based and non-oil based resources. Most of the base oils used in the world are obtained from crude oil refining. Most of the compounds which form base oils are Paraphinic, Naphthenic and aromatic compounds. Base oils chemical properties and their impact on the usage of final lubricant: 1 volatility: reduction of the oil, oil thickening, sediments 2 surface activity: foaming, pressure tolerance, air release, emulsion expansion 3 oxidations: sediments, oil thickening, metal oxidation, mud forming 4 Viscosity: Fluidity in lower degrees, energy waste, abrasion protection, proper cooling 5 being soluble: Motor neatness, sealant compatibility, process applications, formulation sustainability The base oil which is extracted from crude oil is called mineral base oil which is categorized in two types (Paraphinic and Naphtshic). Paraphinic oils are consisted of normal hydrocarbons and Iso hydrocarbons. Naphthic oils are consisted of annular full hydrocarbons. Paraphinic oils have certain attributes in comparison with naphthic oils such as;
