Liquid silicone rubber (LSR) mould Wooden ark
Intensity:10MPA Elongation:220% Proportion:1.15 Color:black 50KG/Bag 22ton/20''container
Natural rubber Rss4 and rss5 grading. Also available scrap and latex as per requirement and specifications As desired
Our company manufactures these profiles that are used in buses and other similar vehicles. These are used between the window and the main body, the door and the main body and in similar other applications. These components are manufactured in superior EPDM compounds with high ozone resistance capabilities. The cross-section design of these components are tested to grip the glass and the automotive body to provide perfect sealing required, avoid any rattling noise and also to provide optimal protection form dust, water and other irritants in the external en
Bar mat
Natural foam rubber Natural foam rubber sheet, made in China. Smellless and environmental, non-slip and non-troxic, they are of good quality and audited by sgs and rohs, 0.7mm to 20mm thick, while the width ranges from 90cm to 145cm.
Cup and desk mat One in a pp bag, 50 pieces in a carton Or by negotiation
Natural rubber latex 5 to 6 kg per (1x15x36)inc sheet
Precured tread rubber In kg.
Natural rubber
Natural rubber Natural rubber rss3, rss4, isnr 20 etc. Black pepper 500 to 550gm/lit 50 kg bales
Green epdm granule Acetone extract: 10% Ash content: 65% Polymer content: chlorination butyl and epdm Tensile strength: 30mpa Glue content: 15% Elongation at break: 150% Hardness: 55f¼70a Sizes: 0.5-1.5mm 0.5-2.5mm 1-3mm 2-4mm 3-5mm Colors: Red green blue yellow gray etc Country of origin: china Packaging: We packed 25 kg per piece in p.P bag. One 20ft container can fill with 20 tons of our products. Volume: Each pallet is 1.6cbm of lcl
Red epdm granule Acetone extract: 10% Ash content: 65% Polymer content: chlorination butyl and epdm Tensile strength: 30mpa Glue content: 15% Elongation at break: 150% Hardness: 55f¼70a Sizes: 0.5-1.5mm 0.5-2.5mm 1-3mm 2-4mm 3-5mm Colors: Red green blue yellow gray etc Country of origin: china Packaging: We packed 25 kg per piece in p.P bag. One 20ft container can fill with 20 tons of our products. Volume: Each pallet is 1.6cbm of lcl
Solid Profiles are often known as EPDM Dense rubber profiles are made in different hardness as per customers specification and are used for the following application :- (a) Windshields & Fixed Window Panels. (b) Glazing Rubbers for Truck & Bus body Building. (c) Glazing Rubber for the containers sealing, Railways, Shipping application & other. (d) Glazing profiles for Buildings & Windows. These are solid extruded profiles made of EPDM rubber with excellent ozone & temperature resistance properties and has good aesthetic features.They are tested as per ASTM/ISO/JIS standards.
Rubber crumbs Denomination of the product : Rubber crumbs resulting from tires recycling. Granulometries (grading curve ranging) : - from 0, 5 mm to 2, 0 mm (from 10 to 35 US Mesh) - from 1, 5 mm to 4, 0 mm (from 5 to 13 US mesh) Origin of the product : Crushed tires resulting from the recycling of a mixture of used tires of various categories (pv, cv, gv, hgv, pwv, cev, iv, agrarian, handling, motorbikes, etc.). All the technical features of these tires comply with the regulations and standards requirements of france and of the european union. Composition of the product : Synthetic and natural rubber (97, 5 %), steel (1, 5 %), textile (1, 0 %). The rubber is made of a mix-in variable proportions of 2 main types of synthetic rubber and of natural rubber. The 2 types of synthetic rubber are : - the sbr (styrene butadiene rubber) - the nbr (nitrile butadiene rubber) The steel is a strongly carbonaceous steel [cf. The specifications sheet of the steel filings]. The textile is a mixture of 4 types of fibres : aramide, nylon, polyester and rayon (mainly nylon, that is to say polyamide) [cf. The specifications sheet of the textile filling and fluff]. Apparent density : 432 kg / m3 or 0, 432 (adimensional). Industrial process of manufacturing : Exclusively with a mechanical crushing of the tires at ambient temperature. The process used does not require and does not reject any kind of solid, liquid or gas additives. Grading curve [in accordance with standards : nf en 933-1 (08 / 97) , xp p18-545 (02 / 04)] : On request. Big-bags of ~1100 kg in 40' dry hc (high cube) container
Rubber fine powder Denomination of the product : Fine rubber powder (resulting from tires recycling) Granulometry (grading curve ranging) : - from 0, 0 mm to 0, 8 mm (minus 21 us mesh) Origin of the product : Crushed tires resulting from the recycling of a mixture of used tires of various categories (pv, cv, gv, hgv, pwv, cev, iv, agrarian, handling, motorbikes, etc.). All the technical features of these tires comply with the regulations and standards requirements of france and of the european union. Composition of the product : Synthetic and natural rubber (97, 5 %), steel (1, 5 %), textile (1, 0 %). The rubber is made of a mix-in variable proportions of 2 main types of synthetic rubber and of natural rubber. The 2 types of synthetic rubber are : - the sbr (styrene butadiene rubber) - the nbr (nitrile butadiene rubber) The steel is a strongly carbonaceous steel [cf. The specifications sheet of the steel filings]. The textile is a mixture of 4 types of fibres : aramide, nylon, polyester and rayon (mainly nylon, that is to say polyamide) [cf. The specifications sheet of the textile filling]. Apparent density : 428 kg / m3 or 0, 428 (adimensional). Industrial process of manufacturing : Exclusively with a mechanical crushing of the tires at ambient temperature. The process used does not require and does not reject any kind of solid, liquid or gas additives. Grading curve [in accordance with standards : nf en 933-1 (08 / 97) , xp p18-545 (02 / 04)] : On request. Big-bags of ~1100 kg in 40' dry high-cube containers
Rss-3 Export standard quality Will be exported in bale of about 111 kgs./bale Suppliable quantity about 500-1, 000 tons/month Our product is supplied worldwide, michelin, good year, bridgestone
Extruded rubber Extruded rubber is a major part of ebco's sale. We extrude sponge rubber, dense rubber, dense rubber with strands of filament and dense rubber with a wire carrier. This broad product range allows us to meet the most demanding requirements. We have compounds approved by ul which comply with the smoke and fire requirements for buses and transit vehicles. The majority of our products are custom but we do have a few profiles which are standard. We have various sizes of edge trim and edge trim with sponge bulbs for sealing purposes. Secondary operations are a common practice with extrusions. Profiles can be wound on reels or coiled on a cardboard disk. Parts may require the ends to have a unique cut or holes and slots cut along the length. To aid in application a pressure sensitive adhesive can be applied to meet the requirements you desire. Flocking is a process where synthetic fibers are glued to a profile to aid glass or a similar surface in sliding. Whatever your requirement we will be able to provide a product for you.
Natural rubber Minimum specifications for isnr - 20 Characteristics Isnr 20 Dirt- percentage weight (max) 0.20 % Ash v percentage of weight (max) 1.00 % Volatile matter (max) 0.80 % Nitrogen (max) 0.60 % Initial plasticity (p0) min 30 Plasticity retention index (pri) min 40 Packing rss 4: 50kg bundles, loose stacked in container without pallets.Packing isnr 20 : 25 kg bales will be packed in 2 layer ldpe bags. Rubber bales will be loose packed in container without pallets/crates.
The products are made by edm, cnc, hcarver, and so on. We adapt the cad\cam\.Edc. Product line, success fufil digital producing.
