Polyisoprene (IR) is designed to be similar to natural rubber in structure and properties. Although it still demonstrates lower green strength, slower cure rates, lower hot tear, and lower aged properties than its natural counterpart, synthetic polyisoprene exceeds the natural types in consistency of product, cure rate, processing, and purity. In addition, it is superior in mixing, extrusion, molding and calendering processes. They combine the key qualities of natural rubber such as good mechanical properties and hysteresis with superior features such as high purity, excellent clarity, good flow, low gel content, no nitrosamines, and no natural rubber proteins. Polyisoprene rubbers (IR) are high molecular weight, anionically polymerized polyisoprene that can be processed in the same way as a natural rubber, including vulcanization. Prime, Near to Prime and Off Grade qualities of Polyisoprene Rubber can be supplied.
Latex is a sticky, milky colloid drawn off by making incisions in the bark of the Par rubber tree (Hevea brasiliensis) and collecting the fluid in vessels in a process called tapping. The latex then is refined into rubber ready for commercial processing. In major areas, latex is allowed to coagulate in the collection cup. Concentrated Latex is derived from Field Latex and is processed using centrifuge methods. It contains 60% Dry Rubber Content (DRC). There are two main types of Concentrated Latex available in the market: High Ammonia or Standard Ammonia Concentrate (HA Latex) and Low Ammonia Concentrate (LATZ).
Natural rubber, in its milky sap, is tapped from the Hevea Brasiliensis tree. Most of the latex is either processed into sheets or solid crumb rubber. It can also be kept in its liquid form through use of chemicals to prevent the latex from coagulation. In the solid form, the rubber sheets or crumbs are used in the manufacture of solid rubber based products, e.g. tyres etc., while the liquid form is used for dipping products such as gloves, balloons and condoms. Technically Specified Rubber (TSR) Rubber grading under TSR was established in the early 1970s. The rubber is graded by its dirt, ash, nitrogen content, volatile matter content and plasticity retention index. They have good processing characteristics and physical properties. Usually, such grades of rubber are high in green strength, tack, easy to mix and has low viscosity. Common sources of TSR include Thailand, Indonesia, Malaysia, Vietnam, India etc. However quite recently the African and South American rubbers are gaining popularity. Most Asian countries have a nomenclature of labelling their standard rubbers with the country of their origin viz. Standard Malaysia Rubber as SMR, Standard Indonesia Rubber as SIR, Standard Thailand Rubber as STR and Standard Vietnam Rubber as SVR. These are used in high performance passenger tyres, motorcycle and bicycle tyres, heavy load truck tyres, conveyor belt, inner tubes and hose.
Ribbed smoked sheets are smoked rubber sheets that have been processed from USS (unsmoked sheets). They are general classified into 5 classes according to purity, elasticity and color. RSS1 denotes the highest quality and those that are of an inferior quality are classified, in descending order, into RSS2, RSS3, RSS4 and RSS5. Ribbed smoked sheets serve as the raw material in the production of many products, including car tires, conveyor belts, rubber pipes, shoes, and automotive parts. We can supply RSS Thailand Origin, Indonesia Origin Packaging Thailand 1 Bale = 111.11 kg ( 1 fcl, 20-ft (180bales) = 20.00mts 1 Bale = 35 kgs ( 1 fcl, 20-ft (560bales) = 19.60mts Indonesia Loose Bales 1 Bale = 113 kg (1 fcl, 20-ft (162 Bales)= 18.306 MT 1 Bale = 35 kg ( 1 fcl, 20-ft (560bales) = 19.60mts Palletize 1 Pallet = 1050kg ( 35kg x 30 bales ) 1 fcl, 20-ft FCL (16 pallet)= 16.80 MT Packing : Loose / Palletize
Product: Natural Latex Rubber HA 60% DRC Packing: + 200kg/ Drum, 98 drums = 19.6 tons / 20DC + Flexi-bag: 21MTs VFA: max 0.035 MST: 650 - 1000 (as customer requirement) Color: Milky White
Rubber Tariff Code is. 4001220000 Natural Rubber SGR-10 FOB Price Per Metric Tonne USD 3,075 USD 3.75 per Kilo. 1. One 20 container contains 20,160 Kgs. of Natural Rubber SGR-10 (16 pallets per container) 2. The product is packaged in free wood pallets. (Pallets of 36 bales each weighing 35 Kgs. Total Weight 1260 Kgs. each pallet). 3. Material of Pallets is: Plastic
We Manufacture & Export All Types Of Rubber Compounds, For More Information Please Write To Us At.
Rubber Granulates Size: 2-5mm In big-bags on pallets 100% Whole truck tyre material
Size 130x240 cm. Thickness 15-35 mm.
In our town we can provide every month 60 tons of raw rubber (latex and rubber cup lumps) however, we are not capable collecting all of it and shipping the product since we lack finance or budget. I would like to invite your company to establish a factory here for your rubber needs as a partner. Helping your company to have a sustainable source and also helping my town. Hope you find this offer as an opportunity. Thank you.
Rubber for Automotive industry working on iron, metal, aluminium, magnets
Type : Centrifuged Latex DRC 60%HA Product Code : HS : 4001 Total Solid Content: 61% min Dry Rubber Content : 60% Min Non Rubber Solids: 1.7% max Alkalinity: 0.6% min MST: 650 min VFA: 0.06 max KOH: 0.7 max
KEY FEATURES: 1. High transparence 2. High tensile strength 3. Good rebound property 4. Outstanding resistance to ageing 5. Low shrinkage 6. Non-discoloring 7. Excellent thermal and cold stability APPLICATIONS: The series are suitable for making baby nipples. PACKAGING: It is available in 20kg pails of 200kg drums TYPICAL PROPERTY: Appearance: Transparent; Viscosity (mpas): 650,000~950,000; Hardness: 20~70 Shore A; Tensile Strength: 6.5~8.5 MPa; Tear Strength: 20~35 KN/m; Elongation at break: 330%~800%; Linear shrinkage: 0.1% REMARKS: The product should be closed tightly, protected from light and moisture, the shelf life is 12 months These figures are for reference only, please contact us for detail. 20 KG/drum
KEY FEATURES: 1. High tensile strength 2. Good rebound property 3. Outstanding resistance to ageing 4. Low shrinkage 5. Low yellowing 6. Excellent thermal and cold stability APPLICATION: The series are suitable for making silicone kitchenware. PACKAGING: It is available in 20kg pails of 200kg drums TYPICAL PROPERTY: Appearance: Transparent; Viscosity (mpas): 650,000~950,000; Hardness: 20~70 Shore A; Tensile Strength: 6.5~8.5 MPa; Tear Strength: 20~35 KN/m; Elongation at break: 330%~800%; Linear shrinkage: 0.1% REMARK: The product should be closed tightly, protected from light and moisture, the shelf life is 12 months. These figures are for reference only, please contact us for detail. 20 KG/drum
Rubber EPDM color granules for playgrounds, production of plates, 1-3,5 mm, 0,5-1,5 mm other colors, packing BB or paper octabines
Bright Future Tyre Recycling Factory Lab Test Test Date : 26/02/2018 Type : 320 S No. Standard Requirement Our result 1 Heating loss (also called volatile matter) Max. 1.2% 0.36% 2 Ash Max. 15% 7% 3 Acetone extract Max. 28% 17% 4 Density (also called specific gravity) Max. 1.35 Mg/m3 1.20 Mg/m3 5 Mooney ML100 (1+4) Max. 85 70 6 Tensile strength (curing condition: 145x10min) Min. 6.5 MPa 10.4 MPa 7 Elongation (curing condition: 145x10min) Min 300% 325%
Various ionic forms of styrene butadiene latex emulsifying asphalt modifier Application field Various ionic forms of styrene butadiene latex emulsifying asphalt modifier are mainly used in the adhesive layer of road engineering, sealing layer, modified dilute slurry sealing layer and micro-surface, bridge deck waterproof bonding layer, waterproof coating of building waterproof engineering, waterproof ointment and other aspects. Product features Various ionic forms of butadiene latex emulsifying asphalt modifier, is a stable emulsion synthesized by high polymer material under the condition of low temperature, it is developed according to the properties of modified emulsified asphalt. The temperature sensitivity of asphalt can be significantly improved by emulsion asphalt modified with butadiene latex, low temperature property, adhesion property, crack resistance and aging resistance can be improved. Waterproof rubber spraying quick-setting latex can significantly improve the spraying quick-setting rubber asphalt waterproof coating after curing of heat resistance, bonding strength, low temperature flexibility, tensile properties and the puncture resistance after the coating film, It amends the coating after curing, such as its resistance to puncture and poor elastic recovery.
Special SBR styrene butadiene rubber asphalt modifier for waterproofing New product introduction In order to pushing the industry development, improving product quality, meeting with the demand of customers. HaiFang Rubber Technology developed XYF - ( item no. 095) styrene-butadiene rubber modifier in 2019. It grafted based on the latex and in particles form. In order to guarantee the high content at the same time, compared with normal SBR products, it can be dissolved without using colloid mill and the dissolution time is shorter. As a new kind of environmental protection material. Its main advantages: Lower melting temperature, reducing production cost, greatly reducing the dust while feeding compared with normal SBR powder. Product features 095 Waterproof SBR styrene butadiene rubber asphalt modifier is made by a certain amount of styrene in SBR styrene butadiene latex, initiated and catalyzed reaction, the formation of SBR rubber latex with a certain degree of interposition thermoplastic. The experimental results show that the high temperature properties, tensile properties, tensile strength, bonding strength and anti-aging properties of the materials can be improved obviously by adding it. To meet different customers requirements, 095 modifier was upgraded to two different kinds of products: High and low-temperature property. High temperature performance: Cohesion strength is higher than that of ordinary SBR modifier with strong peeling strength, the softening point is 4-6 higher than ordinary SBR modifier. Recommended for using in non- curing products. Low temperature performance: It is better than the ordinary SBR modifier, low temperature index is 4 lower than the normal SBR modifier, and it has a better viscosity. Recommended using in type adhesive material. Experimental test indicator SBR modifier shape Normal SBR modifier High temperature 095 Low temperature 095 Softening point 88 95 90 -20 Continuous Continuous Continuous Ultimate temperature -26 -26 -32 75 Not flowing Not flowing Not flowing Peel strength (bonding with aluminum sheet) 1.82 2.78 2.08 Peel strength (bonding with water proofing material) 1.25 1.87 1.51 Bonding effect with aluminum sheet Remains on the aluminum sheet Viscosity lasting >2h >2h >2h Quality Index Effective constituent % Fitness 16 meshes % Molecular weight Ten thousand Binding styrene% Moisture % Mooney viscosity 95 95 22-23 22-27 2.0 75 Method of use A certain proportion of styrene butadiene rubber powder should be mixed slowly into the emulsified bitumen at 140 C-150 C. Then raising the temperature to 185 C-195 C for stirring, until the styrene butadiene rubber powder is fully mixed evenly and swollen while stirring about one and a half hour and with no distinct particles.
Solid Odorless Reclaim Rubber Softener for Producing High Tensile Strength Reclaimed Rubber The solid odorless reclaim rubber softener is shinning black. Its odor is low and the specification is high. It is an ideal replacement for coal tar oil in reclaim rubber production. It is used to produce the reclaimed rubber with a tensile strength over 10 Mpa. Specifications: Appearance Solid black Softening Point 60-70 Ash Content 0.50% 18 PAHS sum1000mg/kg
MANUFACTURER : SHANDONG MATERIAL CHINA LTD SPECIFICATION : SYNTHETIC RUBBER NBR @ ACRYLONITRILE BUTADIENE LATEX FOB : MALAYSIA COLOR : NATURAL MILK AUTHORISED DISTRIBUTOR : GAP RESOURCES (M) SDN BHD www.g4tecinvestment.com/glove_dis PRODUCTION : 200 MILLION / METRIC TONNE MOQ : 20 MT / CONTAINER PAYMENT TO : GAP RESOURCES (M) SDN BHD TERM : TELEGRHAPIC TRANSFER @ TT PRE ORDER : MOQ 20 MT @ 1CONTAINER 1. 50% TT - UPON ICPO / PROFORMA INVOICE 2. 50% TT - UPON SGS / BL
