100% stainless steel, no trust, no chrome coating.
Modern&classic series for your stylish and exclusive life.
Dry heating element, consuming less power, high efficience.
Polishing, stain finish, coloured to meet your different demands.
Great for drying delicates, clothes and towels.
Great to dry off after a shower with a warm towel.
Lower 48 states only.
Size:900*550*165mm
Temp:50 degree
Stainless steel rack
Voltage:110v-240v
Packing size:925*560*70mm, 1 pcs in one pack
Link misr mobile racking system is composed
Of conventional pallet racking installed on
Mobile bases. This unique setup allows
Opening and closing of the aisles. Mobile
Racking enables compact storage while
Keeping the stored products accessible.
Mobile racking system will increase
Capacity by 80% compared to conventional
Pallet racking systems and may lead to
A significant decrease in lighting, heating or
Cooling costs.
Euro shelving features unique shelf support clips that simply slot into place giving firm support for even the heaviest loading requirements, yet allowing for quick and easy repositioning whenever required. Standard shelves will support from 150kgs loads of up to 270kgs .
Designed for durable, practical and economical storage.
Slotted angle system utilizes a basic range of components which can be used to offer storage solutions from simple single bay to complex multi-tier installations.
3314 Racks Shelves Suppliers
Short on time? Let Racks Shelves sellers contact you.
There are three types:
Solo shelving: Cost effective fully adjustable single skin upright shelving system. Solo uprights are manufactured from one-piece steel and feature a delta front edge with no sharp edges, so eliminating snagging when loading shelves.
Duo shelving: Duo shelving with its double skin allows the full shelf width to be used, with clear unimpeded access for easy insertion and removal of files. Duo shelving satisfies the common These slim profile uprights and shelves are aesthetically pleasing making Duo shelving ideal for today’s modern office and commercial environment.
Mono shelving System: Cost effective fully adjustable shelving system. Mono uprights are open with horizontally braced frame and feature a smooth front edge with no sharp edges, so eliminating snagging when loading shelves.
1> Suitable for long-shaped and bulky materials, profiles, pipe, timber and moulding
2> high space utilization
3> structure: H steel and traditional roll-formed style
4> height<6m, arm length<1.5m, pitch 90mm
5> size of column and arm are selective
6> assembly and dismantal easily
7> use high quality of Q235 steel, and competitive price
8> surface treatment: powder coating or galvanized
9> application:Mechanical Manufacturing Industry and markets for building materials, etc
10>Payment terms: By TT or sight LC.
1> suitable for small variety but large quantity stored products, especially for standard goods;
2> high space utilization
3> FIFO/ FILO principle
4> first level pallets can be placed on the floor
5> forklifts operation alongside the aisle
6> assembly freely
7> each aisle consists of several level of pallet support rail. Pallets are placed on pallet support rail one after another;
8> surface treatment: powder coating or galvanized
9> application: warehouse, factory, logistic system, etc.
10> one of the most widely used storage rack
11> OEM order is avaliable
1. All the layers can be fix at any height only if it's times of 75mm, user will adjust different height for various pallet storage;
2. We supply quite big sections of upright to suit special needs;
3. Standard and special dimensions are both available, you just put forward your requirement and we design, we give the solutions;
4. Export powder coated and galvanized surface treatment to prevent against corruption;
5. Pitch is with 75mm.
Distance : between each pillar : 4m to 6m.
Height: first floor is about 3m, the second and third one is about 2.5 m.
Structure:
1)The pillar is usually made up of square tubes or pipes.
2)The main and vice beam are made up of ¡°H¡± type steel.
3) Floor decking is made by cold rolling steel, checkered iron or steel grating.
Load capacity: The floor load is in 1000kgsquare meters.
Application: The upstairs and downstairs could be used for office, so this kind of floor combines storing and management closely. This is widely used in areas, such as third-party logistics, machinery manufacturing and so on.
Operation process: Usually used to build a second floor or third floor assembly type floor in the existing warehouse, make the space change from a layer into two layers, which surely makes the best use of space. Goods are usually conveyed to2nd floor or 3rd floor by forklift hydraulic lifting platform or elevator, and then conveyed to a certain point by light car or hydraulic pallet car.
Features:
DIY easy assembly: the simple structure, (Upright, Steel shelf, Gusset, bolt) can build a compelete unit.
Height adjustable: the unique pre-punched hole on upright allows you adjust shelf height level easily.
Capacity: Light duty shelving, 100kg to 250kg loading capacity per level.
Structure: Sturdy, tough, adaptable, rigid when assembled.
Versatile design: Easy to relocate and ideal for special purpose designs.
Economical, Cheapper cost.
. All-purpose slot angle steel upright
. Cut-in composite usually with steel panel
. Height of each layer can be adjusted freely by pitch of 50mm
. Loading capacity: no more than 200kg per level
. Simple and quick assembled and dismantled
. Loading and unloading by hand
. Powder coating finish and various color be available.
1.Size: 450*600*900mm,
2. One set into one color box, 4sets /ctns.
3.Wire gauge: 6.5*4.5*3.5mm
4.Post gauge: 25.4mm thickness:1.2mm
5.Moq: 50sets
6.Load capacity: 150kg(each shelf)
7.Certificate: iso9001:2000
8.Different sizes are available.
1.Size: 450*600*900mm,
2. One set into one color box, 4sets /ctns.
Cut-in composite step beam on which steel or wooden panels are assembled; the height of each layer is easily to be adjusted by 50mm, the capacity of each level is up to 800kg; the racking can be customized based on clients requirements, compared with the medium-duty shelving, it is more suitable for storing metal components and widely used in the manufacturing industry.
1. Upright: 50*58*1.5/2.0mm, 50mm pitch.
2. Step beam: 50*30*1.5p, 60*40*1.5p, 80*50*1.5p.
3. Steel shelf: 0.7 or 0.8mm, designed by loading capacity request.
Upright shaft is usually made of H type steel or cold rolling steel or frame, square tube, cold rolling steel or H type steel are used to make arms. Cantilevers are assembled to upright shafts by composite type or bolts & nuts which is also for the fixation between base and uprights. Level height is adjustable. Loading and unloading of goods can be done manually or by forklifts.
The height of cantilever racking is usually lower than 2500mm (the height up to 6000mmby using forklifts for loading); length of arm is shorter than 1200mm, and loading capacity is no more than 1200kg per arm. Cantilever racking is mainly used in the Mechanical Manufacturing Industry and markets for building materials. There are three kinds of cantilever racking, light duty, medium duty and heavy duty, each kind of cantilever racking has different loading ability, as well as different material.
1. Steel platforms are mainly consisted by uprights, main beams, accessorial beams, steel floors, stairs and protection rails. Assembling in the whole structure, no need to welding in the sites.
2. The uprights are made of square tubes, round tubes and hot rolling H-type steel, the main and accessorial beams are made of hot rolling steel and cold-bending C-type steel, the material of floors are usually cold rolling steel, the structure is lock-up, between floors and main/accessorial beams, there are special designed locks. Compared with traditional checkered steel plates and steel gratings, the lock-up steel plates have many advantages, such as loading stronger, good integrity, good capacity equality, high accuracy, flat surface, lock easily, etc. also it is easy to assemble lighting system.
3. Forklift or lift platform deliver goods to the second or third floor, then trolleys or hydraulic platform carts deliver the goods to the pointed places. Compared to reinforced concrete, steel platforms have such features, building quicker, acceptable cost, easily assemble and disassemble, and can be moved to use, also, the appearance is more beautiful. The distance between two uprights is 4~6 meters, the height of the first floor is around 3 meters, for the second and third floor, the height is around 2.5 meters. The loading capacity of the floors is usually 300~1000kg per square meters.
4. This kind of steel platforms can make storage and management combine closely, upstairs or downstairs can be used as warehouse office. This kind of storage system are usually used to the third logistics, machinery manufacturing and other industries.
Plastic film as inner package.
3314 Racks Shelves Suppliers
Short on time? Let Racks Shelves sellers contact you.
