• Made of stainless steel / mild steel. • Enable winch rope revolve during pulling operation preventing twisting. • Safety factor of 3:1 for horizontal pull only. Swivel joint advantage • Protect pulling rope. • Secure the screw. • Mostly used in cable installation.
• Strong non-conductive fiberglass rod construction rust proof bull-nose pulling eye. • For longer conduit runs and underground duct. • Rugged tubular steel reel with adjustable positioning. • Feed device allows rod to feed out or be wound back onto reel with easy push or pull of rod.
• Large base plate to give stability even on soft ground. • Easy to handle and simple to operate. • Made of steel construction. • Finish RAL 5012 (Blue Colour). • Additional Spindle & locking collars provided.
• Versatile and vertically adjustable drum axle jaw therefore minimum stroke to accommodate ranges of drums. • Hydraulic bottle jacks – Made in Germany / UK. • Made of steel construction. • Finish RAL 5012 (Blue Colour). • Additional Spindle & locking collars provided.
• Drums are simply rolled up the ramp onto the adjustable rollers to allow it to spin freely. • Heavy duty cable drum rotator is suitable for a range of drum diameters up to 1300 mm. • Adjustable width of drum rotators. • Fast and Simple Installation. • Maintenance free ball bearings. • Made of steel construction. • High Quality Zinc Galvanized Roller finish. • Powder coated RAL 5012 (Blue Colour) stand finish.
Single mode and multi mode SC fiber optic patch cables, SC-LC, SC-ST, SC-FC, SC-MU, SC-MTRJ, SC-E2000, 9/125|¨¬m, 50/125|¨¬m, 62.5/125|¨¬m, SM, MM, UPC, APC, PC. Customized design cables are available. The SC fiber optic patch cord is one of the earliest type and one of the most commonly used fiber optic cable, it is convenient to use and cost saving, It is the most cheapest type fiber optic patch cable. SC fiber patch is widely uesed in fiber optic networks. SC fiber patch cable is with zirconia sleeve and plastic housing. SC Fiber Optic Patch Cord Features: Low insertion loss. High return loss. High stability and reliability. SC Fiber Optic Patch Cord Applications: FTTH, LAN, PON & Optical CATV Local ring net Optical fiber communication system Optical fiber test equipment Optical fiber sensor 1pc/PE bag,100-300pcs/CTN.
Housing metal With flange for fixture Snap-in fixing Version MM/SM ROHS as per factory, also OEM
The MPO / MTP patchcords are simplex multi-fiber Cable using the MPO / MTP connector in fiber counts of 4, 8, 12, 24 or 48. They offer Male and Female MPO / MTP connectors on each end. Available in 4~48 fibers versions as well as multi-mode (62.5/125, 10G OM2 / OM3 / OM4, Bend-insensitive fiber, etc.) and single-mode (G652D, G657A1 etc.) fiber types.
Combining 12~144 fiber trunk cable with 12F MPO/MTP and generic connectors, Gigalight;trunk cable assemblies contain MPO to MPO and MPO hybrid types. Plug and Play Reels, Pulling eye are designed to be quickly pulled and connected to Plug and Play Modules and Adapter Plates. Customized configurable to precise application requirements, these reels or pulling eye are efficiently put high-performance, high-density fiber connections exactly where you need them.
Low insertion loss. High return loss. High reliability and stability. Excellent exchangeability and durability. FC, LC, SC, ST, MU, MTRJ, E2000, DIN, D4, SMA, ESCON, FDDI, MPO, etc is available. PC, UPC or APC polishing. Single mode and multi-mode available. Simplex, duplex or fan-out available. ;0.9, ;2.0, ;3.0 available. Length: 1m, 1.5m, 2mor customized. PVC, LSZH or Hytrel available. Fully compliant with the standards of Telcordia GR-326-CORE and RoHS.
Low insertion loss. High return loss. High reliability and stability. Excellent exchangeability and durability. FC, LC, SC, ST, MU, MTRJ, E2000, DIN, D4, SMA, ESCON, FDDI, MPO, etc is available. PC, UPC or APC polishing. Single mode and multi-mode available. Simplex, duplex or fan-out available. ;0.9, ;2.0, ;3.0 available. Length: 1m, 1.5m, 2mor customized. PVC, LSZH or hytrel available. Fully compliant with the standards of Telcordia GR-326-CORE and RoHS.
Low insertion loss. High return loss. High reliability and stability. Excellent exchangeability and durability. FC, LC, SC, ST, MU, MTRJ, E2000, DIN, D4, SMA, ESCON, FDDI, MPO etc. is available. PC, UPC or APC polishing. Single mode and multi-mode available. Simplex, duplex or fan-out available. ;0.9, ;2.0, ;3.0 available. Length: 1m, 1.5m, 2mor customized. PVC, LSZH or hytrel available. Fully compliant with the standards of Telcordia GR-326-CORE and RoHS.
Cable glands are used on all types of electrical power, control, instrumentation, data, and telecommunications cables. They are used as a sealing and termination device to ensure that the characteristics of the enclosure that the cable enters can be maintained adequately.
A double compression cable gland is typically made for all unarmored and armored cables. Its function is to offer compression for both on the inner sheath and cable armored. It also offers electrical continuity and strain relief for the electrical cables within.
Piezo Actuator PZT,optical fiber stretch,High Accuracy Type:PSt150/14*14/20 Material Properties Material: PZT(PZT5H) Rel. dielectric constant �µref:5400 Loss factor: 200*10-4 Coupling factor:KP=0.62, K31=0.34, K33=0.68 Piezo coefficient:d31=-290pm/V, d33=+635pm/V Elast.compliance: S33E =18.1*10-12m�²/N, S11E =14.8*10-12m/N Frequency constant: Radial=2040m/sec, Thickness=1800m/sec, Transverse=1410m/sec, Longitudinal=1370m/sec Quality factor(resonance): 70 Density:8g/cm³ Curie temperature: 150C Specific heat:380Ws/K kg Thermal conductivity: ca.1.5 Ws/m�·K(axial direction) Above-mentioned parameters can vary significantly with the operating electrical field strength. Temperature Operating temperature: -50~+100C(according to resin). If >100C, PZT performance will be reduced reversibly Above Curie temperature, piezo actuators will be permanently depolarized.
we Hellary Import & Export PVT LTD Exporting wide range of quality Brass Cable Glands and related accessories. Various types of brass cable glands are: PG Cable Gland, Marine Cable Gland, IP68 Cable Gland and Wiping Cable Gland. We also manufacture A1 A2, AXE, BWC, BWL CW, D1W and E1W and much more cable glands.
20622A Packing Gland Assembly 20622A is used for Magnum 3x2x13, 4x3x13, 5x4x14, 6x5x11, 6x5x14, 8x6x11, 8x6x14, 10x8x14 Pumps. Part No.: 20622A Stock No.: 64110338 The Gland Assembly, Packing is mainly used to compress the packing to ensure the tightness between the packing and the shaft sleeve. It will be contacted with the packing shaft and deflector assembly to act as a seal. Tobee offers a complete spare parts line of centrifugal sand pumps to suit for all kinds of drilling sand pump application. Size ranges from 3x2x13, 4x3x13, 5x4x14, 6x5x11,6x5x14, 8x6x11,8x6x14, 10x8x14, 12x10x23 to 14x12x22b.
Savofil, Savoflod, Vitagel Cable Filling Compounds & Optic Fibre Compounds Telecommunication Compounds Telecommunication Compounds are used in the manufacture of Copper Cables as well as Optic Fibre Cables. These compounds are gels manufactured by blending specially selected Base Oils with waxes and thermoplastic elastomers. The resulting gels are used as filling compounds and flooding compounds in Copper Cables as well as Optic Fibre Cables. Applications The compounds fill voids in polyethylene insulated and sheathed Telephone Cables. Their basic function is to prevent moisture penetration into the cables in case of any damage to the cable sleeve. The filling compounds used in Optic Fibre Cables have to meet specification related to moisture tolerance, softness at low temperature down to -40 deg C and stability at a high temperature of 150 deg C. Savita offers wide range of products meeting these requirements of customers across the Globe. Products offered Savita offers two products for Copper Cables â?? Savofil and Savoflod. Savofil is used as a filling compound, while Savoflod is used as a flooding compound. Both products meet the requirements and specifications of national and international customers. For the Copper Cable industry, Savitaâ??s products for filling and flooding can be processed by melting as well as by pressure filling. For filling with pressure, gel is designed with appropriate thixotropic properties. For the Optic Fibre Cable industry, Savita offers 2 products â?? Vitagel MS and Vitagel F, meeting national & international standards. Characteristics The products for Copper Cables - Savofil & Savoflod - for filling and flooding respectively can be processed either by melting or application of pressure. For filling with pressure, gels are designed with appropriate thixotropic properties. Vitagel MS, used in Optic Fibre Cables, is a filling compound which is directly in contact with sensitive Optic Fibre. This gel has excellent low temperature and high temperature properties. It is stable over the temperature range of -40 deg C to 150 deg C and meets national & international standards. The product also has very good rheological properties making it suitable for processing under pressure. Savitaâ??s flooding gel, Vitagel F, is also designed to meet national and international specifications. Gels For Cable Connectors These are gels made from specially selected Base Oils, new generation polymers such as thermoplastic elastomers and special hydrophobic silica. The Connector Compound CN 11 is designed for high thermal, oxidative and hydrolytic stability.
Fiber optic patchcord cables are used in GSM base stations, Fiber Optic interconnections, patch panels, distribution point connections and ODF connections with its structure suitable for indoor use. The following types of fiber optic cable patchcord cables are mostly used in base stations. LC LC MM 50/125 DX patchcord fiber optic cable LC LC SM 9/125 DX patchcord fiber optic cable SC LC MM 50/125 DX patchcord fiber optic cable SC LC SM 9/125 DX patchcord fiber optic cable Fiber optic breakout cables are prepared in different quantities according to the needs in the field.
Breakout optical cable, suitable for outdoor use, is used for RRU assembly in 3G and LTE (4G) base stations. Fiber optic is a system that works on the principle of transmitting light through a pure glass thread as thick as a human hair and produced very precisely. The main reason for choosing cables produced in this way is that environmental conditions are severe; It is not affected by humid, damp places where electrical field interference is intense and always provides a stable connection. Fiber optic cables transmit at the speed of light, that is, 300 thousand km per second. Because of these aspects, they are designed for data transfer over long distances. LC LC MM 50/125 DX type breakout fiber optic cable is mostly used in base stations. Fiber optic breakout cables are prepared in different quantities according to the needs in the field.
