The Tire derived Steel or Tire Wire Scrap is a light melting scrap obtained during the shredding and granulation process of used tires. Generally 10% - 20% of the weight of an old passenger car tyre usually consists of steel. An average shredding plant produces about 100-200 MT of steel tyre wire and its quality can vary according to technology, storing and management systems adopted by the producing plants. We can provide tire wire scrap that still contains up to 20% rubber/fiber. This percentage is detected by manual separation test. The material can be loaded loose in 40 HC container. For further details, please feel free to contact us.
Product Description : Scrap Steel Price of product ( USD price or FOB price) : Please inquire within for current market prices. Product origin : Worldwide. Origin will be determined at time of inquiry. Key Specifications/Special Features : HMS Type 1 and 2 Minimum Order Size and Packaging details : Inquire within for MOQ and packaging details.
The third-generation Hastelloy alloy alloy20 is one of the more commonly used components in the C series. Due to its low nickel content, low cost, excellent mechanical and corrosion resistance, it is widely used in pump flow components where corrosion and wear coexist. The solubility of hardness in the ferrite phase reaches its maximum at 850, and as the temperature increases, the solubility increases rapidly and is much smaller than that of the austenite phase. The Cu content in c-276 has exceeded the high solubility in the ferrite phase. The Hastelloy alloy alloy20, formed by a large amount of Ni element composition, is used in industries such as chemical engineering, pharmaceuticals, seawater, fertilizers, and other industries for projects with high corrosion resistance requirements due to its unique characteristics that lie between ferrite and austenite structures, and its resistance to intergranular corrosion. In recent years, the nuclear power industry has developed a corrosion-resistant ability in the operation of power station equipment, which cannot be replaced by other materials. Containing a large amount of Cr component, with high oxidation resistance. The molybdenum element in stainless steel materials is only about 2%, which is far less than the molybdenum content of Hastelloy alloy alloy20. Therefore, high concentration acidity requires the use of materials well. Mainly used, it has the following corrosion resistance properties in oxidation and reduction, and excellent corrosion resistance to most corrosive media. In this oxidizing environment, such as in sulfuric acid manufacturing and solutions containing a large amount of oxidizing ions, it has excellent resistance to pitting corrosion, crevice corrosion, and stress corrosion. Product name ALLOY 20 STAINLESS STEEL Thickness range 0.3mm-3.0mm, Width range 600mm-1500mm Length 2000mm, 2438mm, 3048mm Size 1000mm*2000mm, 1219mm*2438mm, 1219mm*3048mm, or as required Finish No. 1 , No. 4, hairline , 2b, BA, 8K, embossed, PVD color coated, sand blasted, anti-fingerprint Lead time 7 to 15 working days after the receipt Packing Wooden pallet or according to customer's request Application Interior/exterior/architectural/bathroom decoration, elevator decoration, hotel decoration, kitchen equipment, ceiling, cabinet, kitchen sink, advertising nameplate Warehouse Storage Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project.
Derived from the efficient recycling process our steel scrap undergoes rigorous processing to meet exacting specifications, guaranteeing consistency and reliability for diverse industrial applications.
Food product, medical tools , metal scrap , oil.
Waste Specification: European Classification: E46 EWC Code: 19.01.02 Basel Code: B10 10 The material is loose steel scrap processed through an incinerating plant for domestic waste followed by magnetic separation, fragmentized into pieces and consisting partly of tin coated steel cans. At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form. The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues. The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process. Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed. The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise. The collected stock, is stored in open air, on cemented flooring. Due to the scrap dimensions and the material conditions, this particular scrap, should be carefully evaluated first, by the end users, to confirm its adequate recovery ratio and its suitability to be re-melted in the electric arc furnace. Please feel free to contact us for further details
Welcome to Gremlog Trading DMCC, your premier source for high-quality slag material. As a leading name in the distribution of industrial materials, we pride ourselves on offering superior products that meet the diverse needs of our global clientele. Slag, often referred to by various names such as clinker, dross, fly ash, or ground granulated blast furnace slag (GGBFS), is a valuable by-product of metal smelting processes, particularly from steel and iron production. This versatile material has a wide range of applications, making it an essential component in various industries. From construction and road building to cement production and environmental remediation, slag's unique properties enhance durability, strength, and sustainability
Welcome to Gremlog Trading DMCC, your premier source for high-quality slag material. As a leading name in the distribution of industrial materials, we pride ourselves on offering superior products that meet the diverse needs of our global clientele. Slag, often referred to by various names such as clinker, dross, fly ash, or ground granulated blast furnace slag (GGBFS), is a valuable by-product of metal smelting processes, particularly from steel and iron production. This versatile material has a wide range of applications, making it an essential component in various industries. From construction and road building to cement production and environmental remediation, slag;s unique properties enhance durability, strength, and sustainability.
Bulk Quantity Steel iron scrap Type: Cast Iron Scrap Fe Content: Mixed Weight: 20 Tons Fe Content (%): 99 Iron Scrap: Grade AA+ High purity iron scrap: aa Packaging Details: on buyers request Delivery Detail: Shipped in 10 days after payment Category Type of scrap Note 1 �«A�» Lump cut-off with a thickness of â?¥6, a mass of 0.5-40, which is subjected to remelting The exception is wire 2 �«A�» and �«B�» Waste in chunks, ingots This includes shaped rolled products, pipes and ingots that have been written off
Seamless steel pipe is a steel pipe that is perforated from a whole round steel and has no welds on the surface. According to the production method, seamless steel pipes can be divided into hot-rolled seamless steel pipes, cold-rolled seamless steel pipes, cold-drawn seamless steel pipes, extruded seamless steel pipes, and pipe jacking. According to the cross-sectional shape, the seamless steel pipe is divided into two types: round and special-shaped. The maximum diameter is 900mm and the minimum diameter is 4mm. According to different uses, there are thick-walled seamless steel pipes and thin-walled seamless steel pipes.
Raw melting material - aluminum scraps, cans, engine waste etc. Output capacity - 5-30 tons/h, customized Automation - Full automatic/ half automatic (based on output requirement and investment budget Ingot type - ADC12 (7.5kg/ 10kg / customized) 1. After cleaning the oil and grease of waste aluminum, manually put it into the furnace with a forklift; 2. Ignition for melting furnace .Heat up to 680C, and input appropriate proportion of alloy elements. Heat up to 800C, melt and stir evenly, then fetch samples to the spectrometer for testing. Every lot of production need to do testing . 3. Put A tool that attracts iron into the furnace by forklift, to suck away the iron in the aluminum water. 4. Put the slag agent into Alu liquid to remove the slag. After slag removed , put the slags into Aluminum ash separation machine , and let the aluminum water and ash separate. The proportion of slag agent and aluminum liquid is 1:500 5.Open the drain valve and the aluminum water flows automatically to the ingot production line After the ingot casting is completed, the ingot stacking robot will stack the ingots, which means the production is completed.
Pursuing processing and trading of steel scrap, alloy scrap, iron and steel dross, scrap from tires after pyrolysis, iron oxides, shredded scrap , scrap of metallurgical rolls
The scrap of the rolls contains many alloy additives such as Cr 2.5% -3.5% Ni - 0.8% - 1.5% Mo - 0.2-0.5%. V 0.2% - 0.8%. The roller consists of a cast iron core with C - 3.2% and a cast steel shell with C - 1.2%. There are always higher alloying elements in the roll shells. Scrap especially profitable for quality steel mills Cast iron alloy scrap price 220 Euro exw
Seamless steel pipe is a steel pipe that is perforated from a whole round steel and has no welds on the surface. According to the production method, seamless steel pipes can be divided into hot-rolled seamless steel pipes, cold-rolled seamless steel pipes, cold-drawn seamless steel pipes, extruded seamless steel pipes, and pipe jacking. According to the cross-sectional shape, the seamless steel pipe is divided into two types: round and special-shaped. The maximum diameter is 900mm and the minimum diameter is 4mm. According to different uses, there are thick-walled seamless steel pipes and thin-walled seamless steel pipes.
We are one of the leading exporters of Aluminum scraps such as Stainless Steel Scraps and we are looking for serious buyers who in need contact us. We have been in business for many years Stainless Steel Scraps 304Scrap Material: SS201,SS304,SS316Factories direct materialGrand: 1stWe supply Stainless Steel Scraps of 201,304,316 etcStainless Steel:Grade 304Grade 310Grade 316400 SeriesClean Grade 'A' 304 Stainless Steel Scrap with no attachments.Commodity: 304 Stainless Steel ScrapDescription of commodity: 304 Stainless Steel ScrapSpecificationNickel------------8% to 10%Chromium---------10% to 17%C---------------- 0.08%MN-------------- 2%SI-------------- 1%P--------------- 0.045%S--------------- 0.03% High quality stainless steel scrap 201,304,430 and 316 in stock factory price stainless steel scrap SS304 and 316 Specification
Iron or steel related.
65Mn CK67 high carbon cold rolled spring steel strip Hardened and Tempered Steel Strip Hardened and Tempered is a thermal process that strengthens steel strips through a controlled heating and cooling process. The hardening process involves heating the steel strip to above the rapidly cooling. The steel strip in this condition is extremely brittle and requires further treatment in the tempering. Then strips are reheated to a lower temperature and holding it at the given temperature for a given period of time. This process is done in an inert atmosphere to avoid oxidation. This type of steel strip has big degree of toughness and has excellent spring properties Standard AISI, ASTM, BS, DIN, GB, JIS Place of Origin China Material Hot Rolled Surface Polished Application shutter door, plastic trowel, bricklayer trowel, putty knives, scraper, springs, metal part, shoe insole, shoe accessories, blade, band saw blade Brand Name HENSON Width 2.0mm-300.0mm Length Customize Tolerance +/-10% Hardness 40-55HRC Surface nature, blue, yellow, white, polish Edge Slit,Round,Square MOQ 1000KGS Tolerance thickness+/-0.01mm max,width +/-0.05mm max Type strip,coil,sheet Coil ID 300-500 mm Tensile Strength 540-1575N/mm2 Yield Strength 370-1475N/mm2
Special Use: Cold Heading Steel Wire Gauge: 1.8mm-5.5mm Application: Construction Alloy Or Not: Is Alloy Type: Galvanized Place of Origin: India and China
Brand Name OEM Service Model Number n/a Product Name Stainless Steel Metal Scrap Material 316 304 201 430 Name 316 304 SS Stainless Steel Scrap Purity 99%min Packing Standard Packing Application Industry Quality 99.99% Zinc Coating 40-275g/m2 Width 1000-2000mm Surface Treatment Galvanized
Stainless steel is an iron alloy with a chromium content of at least 10.5%. Chromium forms a thin oxide layer on the surface of steel, known as the passivation layer. This can prevent further surface corrosion. Increasing the chromium content can improve corrosion resistance. Stainless steel also contains varying amounts of carbon, silicon, and manganese. Other elements such as nickel and molybdenum can be added to impart other useful properties, such as enhanced forming ability and increased corrosion resistance. Waste stainless steel refers to stainless steel waste generated from industrial manufacturing and stainless steel processes, as well as stainless steel equipment that has been damaged or scrapped due to long-term use, and stainless steel utensils used in daily life. Our factory produces approximately 20 tons of stainless steel per day, and we have abundant inventory of stainless steel waste with guaranteed quality. Scrap stainless steel is a high-grade alloy steel with a higher value than ordinary scrap steel.
