This machine is used for slitting and rewinding jumbo paper roll into small paper rolls with required width. It has auto. deviation correcting system, auto. tension control system, paper edge blower device, auto. paper loading/unloading system. 2pcs air-expansion shaft will be delivered together with machine. The machine owns below features: Siemens PLC WeiLun touching panel. DuoChuan servo motor SINNE Inverter Auto. Tension controller Taiwan Magnetic powder brake
Our paper bag production line consists two parts, one is paper tube making machine, another is bottom pasting machine. This production line can make 2-4 color printing, bottom valved paper bags. This kind of bags can be used for packing cement, mortar, chemicals materials and other granule or powder materials. Bags can be 2~4 layers kraft paper or clupak paper and one layer of PE material. HT series paper tube making machine can produce multi-ply paper tube. Material paper reels being unwinding automatically, multi-layers paper tube will be formed automatically. Perforation, tearing down, tension control, deviation rectifying, counting is controlled automatically. A multi-color flexo printing machine is connected with this machine, paper tube can get 2-4 color printing. HD series bottom pasting machine does pasting work to the paper tube. Bottom of paper tube can be folded automatically and pasted with glue, another end of tube also will be glued and valve patches can be pasted at this end. This machine can paste different kinds of valve patches at the bottom of bag.
Introduction This machine is used for cutting paper drum into required length. Specification: Model FQ-450 Paper Tube Diameter Ï?280mm-Ï?450mm Work Mode Manual Speed 200pcs/hour Motor Power 1.1KW/380V/50HZ/3Phase Weight ~400KG
Part 1 Equipment introduction The paper can assembly machine adopts advanced forming process, can complete a variety of forming processes, and can completely replace manual operation procedures. The equipment has strong stability and high production efficiency, and can one-to-one operation,thus liberating labor force to a large extent. The equipment has the advantages of saving raw materials and low energy consumption. Stable structure operation,forming stable and low noise. It is easier and faster to replace the mold. Part 2 Advantage characteristics Solving the problem of multi-manual operation in the traditional flat-bottomed paper can assembly process. The equipment can automatically complete the labeling, inside curling, sealing, and scraping operations. With high efficiency, high stability, high quality, assembly work high intelligence, can be unmanned operation and other performance characteristics.
1. Brief description This machine is used for slitting and rewinding jumbo paper roll into small paper rolls with required width. The small paper rolls are used to produce edge protector, paper tube, etc. 2. Technical parameter: Model CM1600 Size of jumbo paper: Max. Width: 1600mm, max. Diameter: 1200mm Paper grammage 45gsm-800gsm Core diameter of raw paper roll 76mm Finished paper size: Min. Width 30mm Max. Diameter of rewind paper roll: 1200mm Speed 0-60m/min Blades 20pairs Power 8.1 KW/380V/50HZ Weight ~2.5T Dimension 2300mm X 2000mm X 1500mm 3500mm X 2000mm X 1500mm
1. Brief description This machine is used for slitting and rewinding jumbo paper roll into small paper rolls with required width. The small paper rolls are used to produce edge protector, paper tube, etc. 2. Technical parameter: Model CM1600 Size of jumbo paper: Max. Width: 1600mm, max. Diameter: 1200mm Paper grammage 45gsm-800gsm Core diameter of raw paper roll 76mm Finished paper size: Min. Width 30mm Max. Diameter of rewind paper roll: 1200mm Speed 0-60m/min Blades 20pairs Power 8.1 KW/380V/50HZ Weight ~2.5T Dimension 2300mm X 2000mm X 1500mm 3500mm X 2000mm X 1500mm
1.Introduction: This machine is used for punching on paper tube. It is easy operate and efficient. This is the website about how it works:https://youtu.be/adTehQmLLuI Main features Model SANPTD-152 Tube diameter 50-200mm Tube thickness 3-30mm
Brief introduction of JBZ-12H high speed paper cup machine 1. JBZ-H series high speed paper cup machine is advanced model, the most outstanding advantage is stable running and low fault rate. This machine adopts PLC control, very easy to operate. 2. All important parts are imported from Europe or Japan, these high standard spare parts guarantee the high quality of machine. such as: the bearing, hot blowing equipment, servo-motor, PLC control system and other electric elements, etc. 3. It can produce both single side and double side PE coated paper cups. High quality of cups made by this machine can satisfy the most selective customers. It is the first choice for paper cup manufacturer when they want to renew their machine. 4. Cup size 6oz to 16 oz. Technical specification Model JBZ-12H high speed paper cup machine Product Speed 65-80pieces/min Highest speed 85pieces/min Total power 20KW,380V,50HZ Main motor power 3KW Heating power 13.2KW Air supply: 1.8m3/min, 0.8Mpa Cup size 6oz-16oz (cup mouth outer dimater: D50-D110mm, cup bottom diameter: 40-70mm, cup height: 50-138mm, bottom folding height: 5-10mm) Paper type single side PE coated paper and double side PE coated paper Applicable paper 210-380gsm. Dimension 2600 Ã?1530 Ã?1600mm Weight 3000kg IMPORTANT NOTICE W.E.F. MAY 2012, A CERTIFICATE OF GENUINE WILL BE ISSUED FOR EACH MACHINE WE MANUFACTURE. THE CERTIFICATE, WHICH IS ENDORSED BY BOTH SAN MACHINERY & SINI MACHINERY, SHOWS AN IDENTIFY CODE FOR THE MACHINE. PLEASE CONTACT US BY SMS / CALL +8613608967385 OR EMAIL TO huntxue#SANMACHINERY.COM WITH THE IDENTIFY CODE, MACHINE'S EX-FACTORY DATE & SERIAL NUMBER FOR YOUR MACHINE'S GENUINE CONFIRMATION.
Ragger is mainly used for removing various kinds of twisting impurities in slurry like iron wire,string,plastic,cotton yarn,etc.Motor directly connect with reducer,adjustable rotation speed,stable operation,smooth running.Pinch roller of ragger is controlled by air cylinder,which can make sure the rope is pulled out with constant speed.
Paper Cup Making Machine Productivity: 60 - 80 pcs/min. Size of cups: from 6 to 34 oz / available: 6.5 and 7,5 oz for vending New Ultrasonic system New 2 airguns extra SWISS made Power supply: 380 V/ 50 Hz Power consumption: 16 kw Dimension of the machine: 2,800 x 1,600 x 1,500 mm In production: yes Condition: excellent Automatic Paper & Carton Cutting Machine Format: 70/ 50 cm Automatic loading Automatic unloading Power: 380 V/ 50 Hz Power consumption: 5 kw Dimension of the machine: 2,000 x 1,000 x 1,500 mm In production: yes Condition: very good All information is given by the source, which deemed reliable. Availability is subject to prior sales.
Product Introduction This Machine is suitable for producing different sizes ofpaper straws, such as 5mm; 6mm; 8mm, 10mm etc. 1. Adopted with PLC controller, main motor is equipped with variable frequency speed regulation, touch screen man-machine interface.Easy for parameters setting & operating. 2. Cutting section adopted with numerical multi-blades cutting system.Servo synchronous tracking cutting system makes it higher precisionand multi-blades cutting makes it higher efficiency 3. Machine body and main spare parts made by stainless steel instead of painting. Ensure the hygiene and environmental protection of the products. Technical Parameter Control System Paper Layer 3 layers Motor 3.0kw (1.5kw * 2pcs) Inner Diameter 5-12mm Motion Controller Panel Master Wall Thickness 0.3-1mm Operating Panel Panel Master Stable Speed 1-40m/min. Language English Winding Nose Two noses single belt Inverter 3.7kw Schneider Machine & parts Painting Electric Components Schneider Length fixing Encoder Pneumatic Components Jingwei Speed Control By Inverter Servo Motor Schneider Cutting System Multi-blades; 5 pcs online Servo Driver Schneider Synchronism tracking cutting system Servo motor synchronism tracking Screw Rod Shangyin Slider Shangyin Paper straw collecting Manually Bearing Haerbin Operator 1-2 person Configuration Working Air Pressure 0.6Mpa Paper Reel Stand 3 Layers Power Supply 380V / 3phases / 50 Hz Gluing Unit 3 Layers Measurement & Weight Belt 5 Pieces Measurement 3500*1500*1200mm Mandrel Shaft 2 Pieces Working Space 7000*5000mm Extra blades 5 Pieces Weight 1300kgs Useful Tool 1 Set Our service 1.One year guarantee time. 2.Present a set of wearing parts in wooden case before delivering the machine for free.  If parts (except wearing parts) are broken within guarantee time they will be changed for free.  (it is not caused by human factor) The client should pay for the cost following:      1. Visa fee    2. Air ticket    3. Diet    4. Accommodation    5. Labor fee:50 USD/day (within guarantee time)     100 USD/day (without guarantee time)
The xxzwn series disc thickener from dekelon, is used in the pulp and paper industry for dewatering and thickening low consistency paper pulp. Not only can this gravity thickener be used to thicken wood, cotton and straw pulp, it is also suitable for filtration and thickening applications in other industries. When compared to other types of fiber suspension thickeners and other existing dewatering and thickening equipment, our disc thickeners feature a simple structure, easy installation and maintenance, a high production capacity, wide pulp adaptability and more. They have become increasingly popular among the pulp and paper industry. According to the specific location of the drive part, the thickening machine has two arrangement modes. If the user is facing the outlet and sees the drum, and the drive part is on the right, the machine is a right hand thickener, represented by "y." on the flip side, if the drive part is located at the left, it is called a left hand thickener, represented by "z."
Dekelon produces high speed facial tissue machines in various models. This paper machine is ideal for making different varieties of tissue papers in a nominal grammage of 13-30g/m² from wood pulp board, waste paper, timber, bamboo, rice straw, bagasse and other pulp. It can serve as both a facial tissue machine and napkin machine, can used to produce roll toilet paper, facial tissue, napkin, paper towels and more, at a maximum speed of 300m/minute, a breadth of 1575-3600mm, and a daily output of 5-20t. The main equipment structure: 1. Back rolls: f380 × 2100mm of one set, including bearings, bearing pedestal, stand column, bolt, and the thickness is 15mm, hardness is 95 ° ± 2 ° with bearings 312. 2. Cylinder section: f1250mm×1950mm stainless steel cylinder mould 2 sets, including frame, bearing shells, bearing pedestal, bearing 3615, f380 × 2000 couch roll 2 sets, the rubber hardness is 38 ° ± 2 °, thickness is 25mm, with bearings 312. 3. Water squeezing section: smooth rollf270 × 2100 one set and bottom rubber rollerf270 × 2100mm one set, equipped with bearings 113513, with two groups of lever pressure device. 4. Touch roll section: f450 × 2000 one touch roll, rubber hardness is 95 ° ± 2 °, and the thickness is 23mm, the crown is 0.6mm, with a good supporting arm, two groups off320 three pneumatic tire pressure device, with bearing 113622 and one set of air control box. 5. Main press section: natural granite stone rollf500 × 2000mm one set, equipped with a scraper, and af450 × 2000 rubber roller, the rubber hardness is 90 ° ± 2 °, thickness is 23mm, the crown is 0.5mm, with bearing 113622/113622 , and a good press arm, f250 two groups of cylinder pressure device, and one set of air control box. 6. Gloss section: f400 × 2000 a calendar rubber roller, rubber hardness is 95 ° ± 2 °, thickness is 20mm, equipped with 113620 bearing and support, arm, spanner positive and negative pressure device two groups.
Dekelon produces high speed facial tissue machines in various models. This paper machine is ideal for making different varieties of tissue papers in a nominal grammage of 13-30g/m² from wood pulp board, waste paper, timber, bamboo, rice straw, bagasse and other pulp. It can serve as both a facial tissue machine and napkin machine, can used to produce roll toilet paper, facial tissue, napkin, paper towels and more, at a maximum speed of 300m/minute, a breadth of 1575-3600mm, and a daily output of 5-20t. The main equipment structure: 1. Back rolls: f380 × 2100mm of one set, including bearings, bearing pedestal, stand column, bolt, and the thickness is 15mm, hardness is 95 ° ± 2 ° with bearings 312. 2. Cylinder section: f1250mm×1950mm stainless steel cylinder mould 2 sets, including frame, bearing shells, bearing pedestal, bearing 3615, f380 × 2000 couch roll 2 sets, the rubber hardness is 38 ° ± 2 °, thickness is 25mm, with bearings 312. 3. Water squeezing section: smooth rollf270 × 2100 one set and bottom rubber rollerf270 × 2100mm one set, equipped with bearings 113513, with two groups of lever pressure device. 4. Touch roll section: f450 × 2000 one touch roll, rubber hardness is 95 ° ± 2 °, and the thickness is 23mm, the crown is 0.6mm, with a good supporting arm, two groups off320 three pneumatic tire pressure device, with bearing 113622 and one set of air control box. 5. Main press section: natural granite stone rollf500 × 2000mm one set, equipped with a scraper, and af450 × 2000 rubber roller, the rubber hardness is 90 ° ± 2 °, thickness is 23mm, the crown is 0.5mm, with bearing 113622/113622 , and a good press arm, f250 two groups of cylinder pressure device, and one set of air control box. 6. Gloss section: f400 × 2000 a calendar rubber roller, rubber hardness is 95 ° ± 2 °, thickness is 20mm, equipped with 113620 bearing and support, arm, spanner positive and negative pressure device two groups.
Our tissue rewinding machine can be divided into fully automatic and semi-automatic types. The fully automatic tissue rewinder comes with a computer control system. Fully Automatic Tissue Rewinder Using computer programming technology, the fully automatic tissue rewinding machine achieves an automatic change of the paper tube or coreless roll paper, and auto gluing, sealing, and trimming. This reduces labor intensity and increases the product quality. Semi-Automatic Tissue Rewinder The semi-automatic tissue rewinding machine relies more on manual operation. With only a slight difference in the operation conversation, there is very little difference between this and the automatic rewinder. Main Features 1. The fully automatic tissue rewinder is available with a double face embossing unit that makes the tissue softer, while keeping a uniform embossing effect on each face and firm lamination. This paper converting machinery is ideal for processing rolls for kitchen use. In addition, the end product comes with 15% or more weight reduction than those with the same size, but a single face embossing. 2. Therewinding equipment can be equipped with special units for a complete and quick switchover between coreless, solid, and hollow tissue rolls. This change over is optional according to customer requirements. 3. Our tissue rewinding machine can synchronously complete automatic trimming, gluing, sealing, and roller drawing out, enabling the paper to smoothly enter the slitter and packaging unit without sheet loss. Because of this, it can improve the production efficiency and product grade. 4. This tissue rewinder uses a pneumatic belt paper feeder. It is designed with tension control devices for unwinding rollers and each paper roll.
The ZSM series coarse refiner is a great choice for the coarse grinding of pulp raw materials and re-pulping of broke and waste paper. This paper mill equipment is also suitable for the refining of continuous fiber pulps such as cotton pulp, wood pulp and helm pulp.Capacity: 10-30 T/D Features of the Coarse Refiner 1. The pulp equipment comes with a long refining zone and strong cutting capacity for fiber. 2. It ensures less damage to the fiber capillary, and a homogenous refining result. The materials will be ground roughly before entering the defibering zone, thus ensuring the paper has a high fracture length, tearing strength, and breaking strength. 3. The conical refiner features a low energy consumption, high production capacity high efficiency, low noise and easy maintenance. 4. It is equipped with both manual and electric operating devices.
The ZSM series coarse refiner is a great choice for the coarse grinding of pulp raw materials and re-pulping of broke and waste paper. This paper mill equipment is also suitable for the refining of continuous fiber pulps such as cotton pulp, wood pulp and helm pulp.Capacity: 10-30 T/D Features of the Coarse Refiner 1. The pulp equipment comes with a long refining zone and strong cutting capacity for fiber. 2. It ensures less damage to the fiber capillary, and a homogenous refining result. The materials will be ground roughly before entering the defibering zone, thus ensuring the paper has a high fracture length, tearing strength, and breaking strength. 3. The conical refiner features a low energy consumption, high production capacity high efficiency, low noise and easy maintenance. 4. It is equipped with both manual and electric operating devices.
This wrapping/packaging paper machine is designed for both single and double layers. It comes in a variety of models, including the 1092 type, 1575 type, 1760 type, 1880 type, 2100 type, 2400 type, 2880 type, 3200 type,3600 type,4200 type and 4800 type. The number represents the machine deckle. It can also be equipped with a relevant device, according to paper grammage, machine speed, output, and other parameters. The main equipment: 1. Pulp-flowing box: It adopts open-type pulp-flowing box, consisting of pyramid tube, staircase diffuser, distributing roller and box body. Staircase diffusion orifice plate pulp distributor is three-stage diffusion, which made of organic glass and upper and lower lip plates made of stainless steel. The upper lip plates can do full and local adjustment is three-stage diffusion. 2. Fourdrinier part: Wire table is 18000mm. Except draw-out seat made of alumina alloy, table rack is all welded by section steel with 1.5mm stainless steel cladding. Wire part is mainly composed of chest roller, forming board, wire-driving plate, water scrapping board, moisture absorbing box, and vacuum water-absorbing box, vacuum roller, wire-driving roller, electrical wire-tighter, pneumatic corrector, constant-tension wire-tighter, incision needle and margin raising device. 3. Press part: It adopts vacuum absorption injection paper, one streak of vacuum pressing and three streaks of pressing. 4. Drying part: It is set 28 pieces of f1500mm drying cylinders, including one f3000mm big cylinder of array type, 6+6+8+1+glueing machine+8 driven by enclosed gear box and lubricated by sparse oil. 5. Driving and control part: It adopts AC frequency conversion speed, drive step by step. Hard tooth surface gear box connected by universal coupling is used, and entire digital closed circle control system is used. 6. Press-polishing and paper reeling: It adopts super press polishing machine and level paper reeling machine.
This wrapping/packaging paper machine is designed for both single and double layers. It comes in a variety of models, including the 1092 type, 1575 type, 1760 type, 1880 type, 2100 type, 2400 type, 2880 type, 3200 type,3600 type,4200 type and 4800 type. The number represents the machine deckle. It can also be equipped with a relevant device, according to paper grammage, machine speed, output, and other parameters. The main equipment: 1. Pulp-flowing box: It adopts open-type pulp-flowing box, consisting of pyramid tube, staircase diffuser, distributing roller and box body. Staircase diffusion orifice plate pulp distributor is three-stage diffusion, which made of organic glass and upper and lower lip plates made of stainless steel. The upper lip plates can do full and local adjustment is three-stage diffusion. 2. Fourdrinier part: Wire table is 18000mm. Except draw-out seat made of alumina alloy, table rack is all welded by section steel with 1.5mm stainless steel cladding. Wire part is mainly composed of chest roller, forming board, wire-driving plate, water scrapping board, moisture absorbing box, and vacuum water-absorbing box, vacuum roller, wire-driving roller, electrical wire-tighter, pneumatic corrector, constant-tension wire-tighter, incision needle and margin raising device. 3. Press part: It adopts vacuum absorption injection paper, one streak of vacuum pressing and three streaks of pressing. 4. Drying part: It is set 28 pieces of f1500mm drying cylinders, including one f3000mm big cylinder of array type, 6+6+8+1+glueing machine+8 driven by enclosed gear box and lubricated by sparse oil. 5. Driving and control part: It adopts AC frequency conversion speed, drive step by step. Hard tooth surface gear box connected by universal coupling is used, and entire digital closed circle control system is used. 6. Press-polishing and paper reeling: It adopts super press polishing machine and level paper reeling machine.
Semi-Automatic Tissue Rewinder The semi-automatic tissue rewinding machine relies more on manual operation. With only a slight difference in the operation conversation, there is very little difference between this and the automatic rewinder. Fully Automatic Tissue Rewinder Using computer programming technology, the fully automatic tissue rewinding machine achieves an automatic change of the paper tube or coreless roll paper, and auto gluing, sealing, and trimming. This reduces labor intensity and increases the product quality.
