1) Goods: PALO SANTO / LIGNUM VITAE CYLINDERS - Info about Palo Santo / Lignum vitae (Bulnesia sarmientoi): Heartwood is greenish and It is often beautifully figured with blackish green fine veins. This specie has smell (good and pleasant smell) - Characteristics of the product: Logs freshly cut. Cylinders not very shapely; without Bark or maximum of 10% of bark on surface; and without sapwood or a maximum of 25% of sapwood on the surface. Each Cylinder is sealed by wax on all Surface and on both Tops also. - Quality: A-grade and better (oiled wood and with smell). - Sizes: . Diameters = from 200mm up to 450mm and up. . Lengths = 1,000mm and longer. * Note: These goods are raw material are much more suitable for Customers who want to have good quality in Lumber, as well as, who want to have a good and high yield in the production of the end products, such as: Rough sawn timber, Planed lumber (S4S) to produce Flooring (solid wood and engineered); Furniture (home & office); Interior home stair (planking & banister); Furniture and Interior decoration for Yacht;. As well as to produce: Stern tube bearings (Bearing or Bushing blocks lining of the stern tubes of propeller shafts of steamships). Attention: The great strength and tenacity of this wood, combined with the self-lubrificating properties due to the oil content, make this wood especially adapted for products under water. It is raw material to produce: Pencil vase, Carvings, Bowling balls, etc. - Capacity of loading = about 26 Tons in each 40â??CNTR. If you have a question, please, donâ??t hesitate to contact to us on: supplylumber at terra.com.br, and so, we will send to you other Details and Photos relating to this product made by our Company. Henry Chavez
Cylinder Head Valve Cover For " BMW " Part Number : 11127646555
The advantage of ceramic liners are as follow: 1. the ceramic liners can not only adapted to same tough environment such as deep oil reservior, hard stratum and severe earthless, but also can be used for offshore oil and natural gas exploration. 2. Compared with Bi-Metal liner, the serivice life of the ceramic liner is 5-10times higher, its maximum and minimum service life can reach more thna 4000 and 2000 hours respectively. 3. the Zirconia ceramic liner with have used the phase transformation toughen technology has various advantages such as wear-resistance, erosion-resistance, hight-pressure-resistance, high strength and high hardness. 4. the cost of shipment, maintaince, labor and storage in the drilling works can be reduced. 5. Compare with the Alumina liners, the zirconia liner have better toughness properties and longer service life, it can also reduce piston wear and water comsumption for lubrication. 6. Ceramic liners for drilling mud pump are widelu used in Coal, Non-ferrous metal, drilling field to improve drilling efficiency.
Bimetallic cylinder(petroleum machinery parts) Material:45# Weight:40.5kg Process:Forging Description:Bimetallic liner is currently widely used mud pump hydraulic fitting
Rock Breaker Nitrogen Gas Cylinder in Chennai. Hydraulic Rock Breaker Nitrogen Gas Cylinder Available for all over india We produce all kinds of Hydraulic Rock Breaker Spare Parts, such as Chisels, Through Bolt, Wear Bushes, Pistons, Diaphragm, Front Head, Back Head, Rod Pin/Biscuit Lock, Nitrogen Gas Charging Kit, Nitrogen Gas Cylinder, Seal Kits, Control valve, Accumulator and etc. Our products match for All type Rock Breakers
Gas Withdrawal Rate - 9.2 N/m/hr Empty Weight - 164 Kg Full Weight - 324 Kg Dimension - 1764 x 508 mm
D-type medical oxygen cylinder available for refilling and supply across Maharashtra.
We have Small as well as jumbo Nitrogen cylinders, also we are delivering the gas through it. The mentioned prices are for the Nitrogen Cylinder only.
acetylene is highly reactive. It is dissolved in acetone and contained within a porous mass inside the cylinder. acetylene can react over time with some metals to form explosive acetylides. acetylene is slightly lighter than air and will collect at ceiling level.
Zero Air is air which has had hydrocarbons removed via a process of oxidative catalysis to ensure it only contains less than 0.1 parts per million (PPM) of total hydrocarbons. ... For these applications the zero air is usually supplied in one of two ways, via pressurized gas cylinders or via a gas generator
Helium / argon mixtures are sometimes used for their higher heat characteristics. Gas mixtures, usually 25% helium and 75% argon are sometimes used and can help to increase travel speeds when AC - gas tungsten arc welding.
Aluminum cylinders available with medical oxygen gas filled across Maharashtra. we have same cylinders in 6.5 & 4.5 Liter
We are the leading manufacturer of argon gas and do refilling and delivery of cylinders across 5 refilling plants across Maharashtra. All grades of argon are available from commercial to UHP grade. We can also transport argon through our mobile tanker to bulk customers.
UHP argon gas cylinder These cylinders that we offer are manufactured from the use of rust proof material. The offered cylinders are widely used for storing argon gas. Our cylinders are extremely rigid body structure. Further, these UHP Argon Gas Cylinders have highly corrosion resistant body.
We are traders and dealers of the Nitrous Oxide Gas and also the cylinder.
We are traders and dealers of the CO2 Gas & Also the cylinder
We also trade the Hydrogen Gas as well as the cylinders.
Helium Gas & Cylinder.
Hydrogen and UHP Hydrogen refilling and service to end consumers Pan-Maharashtra.
We are the trader and dealer of the Helium Gas 6.0 Grade. The purity of the same is 99.9999%.
