SMT Nitrogen Generator with high purity of N2 could be regulated between 99.99% to 99.999% to meet needs of SMT production.Energy conservation, the power consumption of nitrogen per cubic meter is about 0.42 degree. Low dew point of product=-45'C to ensure the quality of welding. Standard models, simple compatibility.Inthe reflow solding of SMT, nitrogen gas is charged into reflow furnace. The following advantages of soldering are listed in the nitrogen atmosphere:The quality of soldering is enhanced with the prevention of surface oxidation. The flux is guaranteed to the correct activation. The remnants of flux is lower. The surface of soldering is more artistic. 1130*750*2120MM 1000KG
Vipeak High Pressure Midum Speed Grinder is suitable for grinding the barite, limestone, kaollnite, ceram and slags, etc. which below scale 9.3 of Moth and below 6% shadness and 280-odd sorts of non-inflammable and non-explosive stuff in the trades of mining, metallurgy, chemical engineering and building material for high fine powder generating and processing . The Product size is adjustable in the range of 80-425 mesh. It is possible to produce 30-80 mesh coarse powder through special device in the machine. High Pressure Midum Speed Grinder Features: 1. Having higher capacity of 20-30% relatively to Raymond mill, and Higher grinding force of rollers to stuffs because of high pressure springs.( notes for 5R4121: compared to 5R4119 raymond mill, at the same motor powder, capacity is improved to 10%, and Higher grinding force of rollers to stuffs because of high pressure springs.) 2.It can process the mineral stuffs of Moh's hardness below 9.3 grade. 3.The final products have a wide range, max. powders are up to 0.95mm(20mesh), mini ones are 0.038mm(400mesh). little pollution and dust collector efficiency is to national limitation. High Pressure Midum Speed Grinder Working process: large stuffs are delivered to bunker by elevator after crushed, then to chamber by electric feeder. In mainframe, shovels scoop up stuffs into the parts between rollers and ring, the processed powders are blowed up to analytical engine with wind entering chamber by blower, part of powders which can not be up the demand fineness will fall back to be grinded, left(that is final product) with airflow enter concentrator and divided with air then discharged from discharge vavle. Air returns to blower and circles, flowing in minus state.
On basis of many times experiments and improvement, introducing the latest mechanical techniques of Sweden , High Pressure Micropowder Grinding Mill, the latest industrial micro-powder grinding mill, is a new type grinding machine for producing micro-powder. Note: When users grind the material that hardness degree is between 4 and 6, the service life of the wearing parts will be shortened. Vipeak High Pressure Micro-powder Grinding Mill can grind calcite, limestone, calcite, dolomite, kaolin, bentonite, talc, illite, pyrophillite, barite, meerschaum, fluorite, potash ore and other more than 200 kinds of materials that Moh's hardness is below 6, non-explosive, non-flammable minerals. Features of High Pressure Micropowder Grinding Mill: 1 Energy-saving 2 Wide Application Range 3 Good craftmanship 4 Powder Fineness:
Sand Making & Washing Production Line: Henan Vipeak Heavy Industry Co., Ltd. manufactures various equipments for whole set of sand-making production line, and provides superior technical support for customers. The whole sand-making production line consists of vibrating feeder, jaw crusher, PCL vertical shaft impact crusher (sand-making machine), vibrating screen, sand-washing machine, belt conveyor, electric control system, etc. We design different production lines ranging 50 t/h to 500 t/h. We have been researching the sand-making machine for years, and we have made it part of the production line. The whole set of sand-making production line designed by our company is suitable to crush the hard limestone, granite, basalt, gravel, slag, etc and artificially sand making for hydroelectric power, building material, high way, city construction, etc. Different models of equipments are combined to meet different customersí» different demands according to different craft requirements. Process of the Production Line: The raw material is transferred to jaw crusher for primary crushing by vibrating feeder, then the crushed materials are transferred to sand-making machine through belt conveyor for secondary crushing. The crushed materials will be transferred to the vibrating screen. The materials with suitable size will be transferred to sand washing machine, after being washed, then clean final products will be discharged. The others with unsuitable size will be screened from vibrating screen, then will be transferred to the sand-making machine, this forms a closed circuit manifold cycles.
Raymond mill(vipeak) With qualified products and good service, zhengzhou vipeak heavy industry machinery co., ltd supplies series raymond roller mill(raymond mill), which is suitable for grinding barite, calcite, potash feldspar, talcum, marble, limestone, ceramics, etc. Whose mohs' hardness is below 7 scales and humidity does not exceed 6% and other non-inflammable and non-explosive material. Features: Three-dimensional structure Land-saving The screen-passing rate can reach to 99% The transmission is steady and reliable; The transmission device of mainframe adopts airtight gear case and zonal wheel. Centralized control for the electric system, convenient to operate. Model 3r2115 Max feeding size (mm)15 The final products size (mesh)80-325(finest 500) Capacity (t/h)0.2-1.5 Rotational speed of the central axis160rev The inner diameter of roller (mm)¿¬630 The diameter of roller (mm)íd210 Height of roller and ring (mm)150 Motor of mainframey200l-8-15kw Motor of air blowery132m-4-11kw Motor of separatory112m-6-2.2kw Dimension (l*w*h)4.6*3.4*5.9 3r2115 Max feeding size(mm):15 The final products size(mesh):80-325(finest500) Raymond roller mill 3r2715 Number of roller: 3 Diameter of roller: 270mm Height of roller: 140mm Inside diameter of ring: 830mm Height of ring: 140mm Max. Feeding size: 15-20mm Fineness of product: 0.044-0.165mm Capacity: 0.9-3.8 t
Dry mix mortar plant With a productivity of 15 to 80 tons per hour; the sand is weighed automatically after drying and sorting, cement and fly-ash is feed in bulk, automatic weighing, additives automatically weighed as well. This type is the generally used fully-automated production of high-grade products in the world at present; apply to customers with a large investment capacity.
Precision grinder
Vertical milling machine
RDSO approved plant
The system is capable of producing bright and long oxygen-free copper rod, copper tube, flat copper bar and other special shaped copper material from cathode copper, and the copper rod diameters are from 8mm to 30mm. Total annual capacity is from 2000 MT to 10000MT. Technical parameter of final product: Density: 8.9 g/cm3 Tensile strength: 170N/mm2 Elongation at break: >35% Conductivity of soft wire: í¦100% IACS Oxygen content: í_10ppm
Universal high performance press are widely used in the field of aeronautics, automobiles, agricultural machines, electric machines, apparatuses and meters, medical equipments, electrical home appliances and hardware. Welded frame with quality steel which means good rigidity Square figure long guide with six friction faces makes abrasion on resistant and punching precision. Combined pneumatic clutch and brake is made of friction material, which means long service life. Closed bevel gear, dipped in lube, which drives stably with low noise. Slide with counter balancer, which will eliminate the clearance and improve the stability and precision. Jh series automatically lubricate at a fixed time and location with fixed amount. Plc electric control system is safe and reliable. Air cushion, photo guard, auto feeder, speed die changing are optional. Fb*lr*height:1940*1370*3290 Weight:10000kg
Three-dimensional structure land-saving the screen-passing rate can reach to 99% the transmission is steady and reliable; the transmission device of mainframe adopts airtight gear case and zonal wheel. Centralized control for the electric system, convenient to operate. Model 3R2115 Max Feeding Size (mm) 15 The final products size (mesh) 80-325(finest 500) Capacity (T/H) 0.2-1.5 Rotational Speed of the Central Axis 160Rev The inner Diameter of Roller (mm) º¦630 The Diameter of Roller (mm) º¦210 Height of Roller and Ring (mm) 150 Motor of Mainframe Y200L-8-15KW Motor of Air Blower Y132M-4-11KW Motor of Separator Y112M-6-2.2KW Dimension (Lí-Wí-H) 4.6í-3.4í-5.9 Raymond Roller Mill 3R2715 Number of roller: 3 Diameter of roller: 270mm Height of roller: 140mm Inside Diameter of ring: 830mm Height of ring: 140mm Max. Feeding size: 15-20mm Fineness of product: 0.044-0.165mm Capacity: 0.9-3.8 t Raymond Roller Mill 4R3216 Number of roller: 4 Diameter of roller: 320mm Height of roller: 160mm Inside Diameter of ring: 970mm Height of ring: 160mm Max. Feeding size: 20-25mm Fineness of product: 0.044-0.165mm Capacity: 1.8-4.5 t Raymond Grinding Mill 5R4121 Number of roller: 5 Diameter of roller: 410mm Height of roller: 210mm Inside Diameter of ring: 1270mm Height of ring: 210mm Max. Feeding size: 20-25mm Fineness of product: 0.044-0.125mm Capacity: 5-8 t For information, please see our website: http://www.grinderpro.com/Raymond.html
DM - 20 Of 15 - 20 TPH DM - 45 Of 30 - 45 TPH DM - 60 Of 45 - 60 TPH DM - 90 Of 60 - 90 TPH DM - 120 Of 90 - 120 TPH DM - 150 Of 120 - 150 TPH
Fully computerised plants upto 150 tph capacity Mobile and stationary Wet type and bag house filter systems Hot mix storage silos Global presence with prompt product support Top quality components Safety covers provided with moving and electrical parts Ease of lubrication and dismantling has been built into the design for efficient maintenance and repair Fabricated parts are thoroughly cleaned and treated before painting State of the art technology and internationally recognised techniques used in the manufacturing process
CGLHJ series of Electrical conveyor belt vulcanizer are specialized equipments for curing joints of belts of conveyer machines. The machine is made of light aluminum alloy materials, and with small bulk, light weight , ordinary three-phase current power supply, temperature uniformity of heating plate, uniform pressure (1.0 ~ 2.0 Mpa) of water supply system. It is equipped with light Automatic Electronic Control Box, which is connected with mainframe by integrative plug-in and multi-core cable .Ití»s reliable and convenient to operate. At the same time, it has the merit of fast warming, uniform temperature, high thermal efficiency, etc. It is a kind of ideal adhesive joint equipment mechanical rubber conveyor belt. The quality of the belt connection will influence the working efficiency and service life of belts directly, especially for the long distance and high-strength conveyer belts. Therefore, CGLHJ vulcanizer is the necessary assistant equipment of belt conveyer. Purposesú¦ The device is widely used in vulcanizing and adhesive joint of canvas, nylon, steel cord, conveyer belt at spot in metallurgy, mining, power plants, ports, building materials, chemical industry around where are without sufficient explosive gases and the harmful gases which can corrupt metal. It can also be applied to the vulcanizing joints of belts of special features, such as anti-corrosion, thermal-protection, etc. Technical parametersú¦ 1. Vulcanization pressure: 1.0-2.0mpa; 2. vulcanization temperature: 145 íµ; 3. Difference in surface temperature of vulcanized plate: í+ 5 íµ; 4. Calefactive time (at normal temperature to 145 íµ) :¿Q30 min; 5. Power supply voltage: 380 v. 50Hz; 6. Output power of Electronic Control Box: 36 Kw; 7. Temperature adjustment range: 0 to 200 íµ; 8. Timing adjustment range: 0 to 99 min; 9. After the pressurization of 0.8 MPa, the gap between upper and lower heating plate is not more than 0.4 mm
CGLHJ Series of Electrical water cooling belt Curing Machine own small bulk, light weight , ordinary three-phase current power supply, temperature uniformity of heating plate, uniform pressure (1.0 ~ 2.0 Mpa) of water supply system. It is equipped with light Automatic Electronic Control Box, which is connected with mainframe by integrative plug-in and multi-core cable .Its reliable and convenient to operate. Presently the devices are widely used in vulcanizing and adhesive joint of canvas, nylon, steel cord, conveyer belt at spot in metallurgy, mining, power plants, ports, building materials, chemical industry around where are without sufficient explosive gases and the harmful gases which can corrupt metal. It can also be applied to the vulcanizing joints of belts of special features, such as anti-corrosion, thermal-protection, etc. The device can cool heating plates quickly through water as long as there is ordinary water supply at the scene after vulcanization. It Can greatly improve efficiency and enhance the quality of belt joints, generally cooling from the curing temperature to 60 íµ, 10 minutes, cooling water pressure í¦ 0.2 mpa. Water cooling belt Curing Machine, of lightweight, can be moved by manpower easily. Please consider the facility of electricity and water before installation. Please put through the water sources with upper and lower heating plate, cooling water pipe by specialized water pipe, but not to discharge water for the time being. Then begin to maintain constant temperature until finish vulcanization, then open water supply at this time instill water into hot plates. When the temperature drops to preset technical value, discharging water and disassembling equipments are allowed, and the vulcanization is finished. Purposesú¦ The device is widely used in the fields of metallurgy, chemical industry, metal mine, power plant, harbor and wharf where use the device to contact the belt joints. If users carry out vulcanization technics according to referred parameters, the pull intensity of the belt can be 90% comparing with the original one, not only the belt joints are smooth, but ití»s almost the same with the original belt, and meanwhile it will weaken the abrasion to rollers, furthermore it can prolong the service life of conveyor and conveyor belt.
No.1 Introduction: Aiming at solving the defects of the traditional steeliness rollers, such as when encountered acid, alkali and salt, they are easy to get corrosive, sticky, abrade, and due to getting stuck of the axletree, the belt is easy to lacerate as well as their short service life, etc. Our company has succeeded in developing wear-resistant ceramic rollers. After the terminal operating results in iron and steel, chemical, fertilizer, mining, power plant, salt works and shipside industries show that the products are not only of wear and acid and alkali salt resistance , anti-oxidation, operation stability, security features, but also can effectively prevent the belt deviation, reduce partial loss of belt, prolong its service life, reduce the manpower, material resources and time caused by replacing rollers frequently, lower operating costs and improve the efficiency of belt conveyor. As operating under harsh environment in the open air, their service life is 3-5 times longer than the traditional one. No.2 product advantages: 1. Corrosion resistance. 2. Strong hardness and abrasion resistance. 3. Entire hermetic sealing. 4. On the Ceramic surface forms a layer of oxide film, it doesní»t have any binding or response to any substance. 5. 2-5 times longer service life than steeliness roller, furthermore it can reduce belt abrasion and prolong service life of belts. 6. Cost-effective, it can reduce the integrated costs of the belt conveyor and repairing. No.3 Data Sheet of Chemical Composition: Component Sio2 Al2o3 Mgo Fe2o3 Cao Na2o Other Content 51-54% 45-48% 0.4% 0.25% 0.15% 0.1% Tiny No.4 Technical Parameters: Compressive strength: 145 Mpa Flexural strength: 80 ~ 120 Mpa Hardness (Mohsí»s) :> 7 Adaptable Temperature: -80 to 180 íp C Water absorption:
Working area:740*1120mm Travel of engraving:600*900mm Power of main spindle:2.2kw Maximum speed:10m/min Maximum carve speed:7m/min Maximum feed-in height:200mm Work mode:stepper Voltage:ac220v/50hz Command:g code*.U00*mmg
Working area:1410*1420mm Travel of engraving:1200*1200mm Power of main spindle:2.2kw Maximum speed:10m/min Maximum carve speed:7m/min Maximum feed-in height:200mm Work mode:stepper Voltage:AC220V/50Hz Command:G code*.u00*mmg
Cnc Acumen solutions provide one stop solutions for most of your industrial needs, we provide most possible best solution for our customer's requirement in a short duration, with world class quality and in competitive price with value added services. Acumen solutions is based in singapore and providing services to various industries located in india, malaysia, australia..Etc., having a wide range of network in various countries including china, taiwan, malaysia, germany, singapore, australia..Etc., We are working closely with various electronics, medical, automotive and semi conductor industries by providing the most latest and reliable technology. Our main products are 1) new and used machines solutions 2) industrial automation solutions. 3) standard and customized products solutions. 4) engineering design and analysis solutions. 5) precision machining solutions. 6) import and export solutions.
