St230f tel line tester is a portable and intelligent line fault tester, which adopts advanced technologies such as intelligent cpu, ic & smt technology. It integrates various kinds of functions such as telephone and line performance test to be the one. The incoming call number display function is compatible with fsk/dtmf two types. Its particular function of dc/ac voltage test can test whether there is dangerous dc/ac high voltage in the line or not quickly and accurately in order to protect lineman from high voltage. The tester is designed following the human engineering theory with the appearance style like barbell, it can be put on the shoulder, the lineman can do other work using hands at the same time; besides, it can be hung in the tool belt of waist through the pothook, it is convenient to realize the talk function cooperate with the high quality earphone when the lineman is climbing or doing other things; the max working duration when the inside rechargeable ni-mh battery is fully charged is 7 hours; the shell is made of the new type of material and it resists water and shock. Features: 1. Cid function, FSK/DTMF compatibility 2. Dtmf applying to GB/T15279-94 3. Dialing number display 4. Checking wire pairs function 5. Low voltage warning, automatic power off and energy-save design 6. Handsfree 7. Small size, simple operation. Quantity no limited /case pack Dimensions(mm): 232-73-95 Weight kg: 0.5.
Features: With latest patented technology Safe and time saving: non-contact phase sequence detection Multipurpose: with live wire examination,simple power inspection, phase deficiency judgment, breakpoints finding and line maintenance Dynamic LED display Sensitive and reliable. Specifications: Voltages: 70 to 600V AC Dimensions to be clamped: diameter 18mm.
Features: Widely applied in ground resistance measurement, loop resistance measurement With optional function of RS232 interface data upload No need to disconnect the ground wire from the ground net Without auxiliary electrode High accuracy and resolution With data memory Automatic power off Specifications: Clamp size: 65 x 32mm Resistance range: 0.01 to 1,200ohm; With automatic shifting Resistance resolution: 0.001ohm; Data memory: 99 sets Alarm setting: 1 to 199ohm; and buzzer alarm Quick boot: in 0.5 second With lower consumption.
Parameters: - simulation and measurement: thermocouple signals J, K, T, R, S, B, U, L, E, N, with auto-compensation of terminal temperature, signals in thermocouple and thermostat system, resistance thermometer signals: Pt 100, Pt 500, Pt 1000, Ni 100, Cu 100, resistance signals from 10 up to 5 , voltages and currents in range: -11 V...+11 V and 22 mA...+ 22 mA - accuracy 0.025% - STEP and RAMP function, - led out 24 V terminals, - RS 232C interface, - available in the option for pressure calibration. The INMEL 60 calibrator is destined to check and control systems, industrial automatic control engineering devices such controllers, recorders, meters, etc. This instrument has the possibility to generate and measure signals from ten thermocouples, five thermometer resistances, four voltage ranges, two current ranges, two resistance ranges. Thermoelectric terminals have an internal temperature measurement and for this reason make possible the generation or measurement of thermoelectric signals with the compensation for the given thermocouple. In this working mode, a real thermocouple is added to thermoelectric measuring terminals, and compensation conductors to thermoelectric generating terminals. The calibrator ensures the simultaneous generation of the signal on output terminals and the measurement of the signal on measuring terminals, thanks to this feature the calibrator is suitable to check transducers. The INMEL 60 calibrator enables to check two-wire transducers. the used graphical display contains a lot of information on a screen with a good readability. The display ground-lighting, which can be switched off, is especially useful in conditions of an insufficient lighting. The internal supply from the battery enables the work not only in laboratory conditions but also on the object. The calibrator can also be used to the maintenance and servicing of industrial measuring instruments, systems and electronic equipment. Application: Checking and calibration: - measuring transducers controlled by a voltage or current signal, a thermoelement or resistance thermometer, - two-wire transducers, - temperature meters, - pressure transducers, - manometers, - measuring and control lines.
Technical parameters: - Voltage ranges from 200 V up to 1000 V, - Current ranges from 200 A up to 20 A, - Frequency ranges from 20 Hz up to 100 kHz, - Resistance from 1 up to 19 M, - Voltage accuracy from 35 ppm, - Current accuracy from 150 ppm, - Ample software, - High output load, - RS 232C , IEEE488 interfaces. The INMEL 7000 calibrator is device with very high precision and simultaneously high load, thanks that it pulls ones weight very well with checking modern type as well older types of meters. It is characterized elastic and open systemic structure. We offer varius version of this calibrator from very simple e.g the DC voltage calibrator up to full configuration : DCV, DCI,ACV,ACI and R. Thanks to ergonomic desc and rich internal software the INMEL 7000 calibrator is very handly. In calibrator INMEL 7000 used modern construction solution, in which used new generation of electronics elements of renowned worldwide companies. Thanks that ones received very good metrological parameters, reduced quantity of compnents, and in this way augment the reliability of this calibrator. Application: Checking and calibration: - AC and DC voltmeters, - AC and DC ammeters, - frequency meters, - measuring transducers, - ohmmeters.
Technical parameters: - Voltage ranges 0.2 do 1000 V, - Current ranges od 20 mA do 20 A, - Frequency ranges od 40 Hz do 5000 Hz, - Voltage and current accuracy DC 0.02%, - Voltage and current accuracy AC 0.05%, - Load carrying capacity 40 VA, - Serial interface RS232, USB, Ethernet. The INMEL 1000 calibrator was made on base of modern componenets of microprocessor technologies. Applicated technologies are comparable with technologies used by leading global companies.The INMEL 1000 calibrator characterize oneself the innovative structure of operation in range of output signals and operation of measuring and regulatory loop.For AC course possible is the synchronous operation with the main. This possibility influence on output parameters, reliability, comfort of work, the communication way with user and external devices. The calibrator INMEL 1000 fulfils directives of the European Union within the range safeties and the electromagnetic compatibility:The production of the INMEL 1000 calibrator does not create threats for environment. Application: Checking ang calibration: - AC and DC voltmeters, - AC and DC ammeters, - frequency meters, - measuring transducers.
Parameters: - voltage measure: 0 100mV, 0 10V, - current measure: 0-24 mA, - voltage generation: 0 100 mV, 0 10V, - current generation: 0 24 mA, - voltage accuracy: 0.02% + 2 digits, - current accuracy: 0.015% + 2 digits, - loop power output: 24V Calibrator INMEL 50 integrate generation and measurement function of electric signals, used in automatic industry. The main features of this devices is high accuracy and resolution of generating or measuring signals, friendly operation and large display. Application: Checking and calibration: - measuring transducers, - measuring and control lines, - current loop.
1.Available for encoding, and for setup of the address for each DMX512 decoder module (SC-DMX-00xH/L) of own company; 2.Available for one-time setup of different addresses for the DMX512 control system consisted of by SC-DMX-00xH/L(DMX-512 decoder module) of own company; 3.Available for transmission single and multiple channel DMX512 signal; 4.Available for scene function, and for independent setup of DMX512 Start code and value of each channel; 5.Support transmission of DMX512 testing signal by 40Hz or 20Hz; 6.Available for receiving DMX512 signal and for separate display of 512 channels and their respective Start code. Technical specifications: Brand name SC-DMX-512 Communication protocol DMX512/1990 DMX512 I/O RJ45*2 Display 16*4 large screen LCD Power supply input DC 9V Rated power
Dimension (LxWxH): 223*92*45mm Weight (W/OBattery): 185g Ambient Condition: below 30-80%RH (w/o condensation) Battery: 6F-22 9V Metal Test (Ref.Value): Steel pipe(Diameter¦Õ15) Test Depth 24mm Voltage Test (Ref.Value): AC110V Depth 20mm AC220V Depth 20mm Wood Test (Ref.Value): Wood Framing (up to 15mm). Each item in one Double Blister 6 pcs / inner; 24 pcs/ctn inner ctn size: 31.5*18.5*31.5cm ctn size: 65.5*39.5*33cm Gw/Nw: 9/8 Kgs.
ZY 6058 Tracking Index Tester A. Introduction: This device applies to lighting equipment , low voltage electric appliance, household appliances, electric appliances , electric tools ,electronic instruments, electrical instruments , information technology research and production and quality department, also suitable for insulation materials , engineering plastic . electrical connectors, auxiliary parts industry. B. Standards: IEC60112, GB/T 4207, UL746A . C. Main parameters: 1. Testing chamber size :60cm*95cm*90cm (DxHxW) . 0.5M³. 2. Testing voltage : continuously adjustable during 100-600V, digital display. 3. Electrode :2 piece of platinum electrodes, 2mm*40mm*5mm (DxHxW). 30 inclined plane . 4. Distance between electrodes : 4.0mm. 5. Droplet equipment : interval time of droplet is adjustable 6. Pressure on surface :1.0 7. Max electricity : 3A 8. Outsize :61cm(D)x120cm(W)x105cm(H).
DTDL-8110 Cablefault Test Set is an integrated set of Cablefault Detection and Location Devices. It is applicable for many types of power cable, communication cable and optical cable. It can accurately measure the distance of cablefault and locate the fault point. The system includes: 1) DTDL-8110 Mainframe. 2) DTDL-8032R Receiver. 3) RF Inductive Tracking Rod. 4) Potential Difference Locating Rack with 2 pins. 5) AF Stethoscope and Headphones (for Listening mode). 6) Grounding Pin.
Parameters WEW-100 Accuracy 1% of indicated value Measuring range of force(kN) 2-100kN Subsection of force 1,2,5,10 Accuracy of deformation measurement 0.5%F.S Clamping diameter for round specimen(mm) ;6-22 Clamping width of flat specimen(mm) 40 Clamping thickness of flat specimen(mm) 0-15 Testing space Tension 550 Compression 500 Platen size 100 Distance of bending by pass roll(mm) 30-400 Piston stroke(mm) 250 Power supply : 50Hz Working environment Room temperature : relative humidity Overall dimension(mm) Frame machine730x500x2000 Control System 1070x810x1730 Weight(Kg) 1370
Digital control hydraulic compression testing machine 1. Maximum Testing Load: 600kN 2. Measuring Range of Load: (24-600) kN 3. Accuracy of Testing Load: 1% 7. Distance between Upper and Lower Platen: 225mm (Adjustable) 8. Size of Upper Compression Platen: 180mm 9. Size of Lower Compression Platen: 250mm 10. Piston Ram Stroke: 150mm 11. Power Supply: three phase, 380/220V;50/60Hz 12. Working Environment: 80% Overall dimension: Frame: 1120, 1650(MM) Weight: Frame:950kg
1. Maximum Testing Load: 2000kN 2. Measuring Range of Load: (80-2000) kN 3. Accuracy of Testing Load: 1% 4. Rate of Loading Speed: 0.5N/s~10kN/s 5. Accuracy of Rate of Loading Speed: 5% 6. Accuracy of constant testing Loading: 1% 7. Distance between Upper and Lower Platen: 500mm (Adjustable) 8. Size of Upper Compression Platen: 230;280mm 9. Size of Lower Compression Platen: 230;280mm 10. Piston Ram Stroke: 200mm 11. Power Supply: three phase, 380/220V;50/60Hz 12.Working Environment: 80% Overall dimension: Frame: 1115 Control System : 187; Weight: Frame:4850kg, 200kg
his series testing machine is suitable for tensile, compression, bending, shearing, peeling and tearing test of metal and nonmetal materials, such as rubber, plastic, electrical wire and cable, composite, profiled bar, bar metal, board, spring, components and so on. It confirms to ISO 75001ú¼ASTM A370, ASTM E4 ASTM E8 and JIS, DIN, BSEN testing standards. AD800 in this machine is whole digit multi center closed loop measuring and control system. It adequately absorbs advanced functional characteristics and integrates the latest international professionally developed measuring and control system. Control software can automatically finger out routine data, such as tensile strength, yield strength, modulus of elasticity, extend rate after rupture, non-proportional extend strength RP0.2, etc. It can adopt many kinds of controlling modes, such as constant force, constant displacement, constant deformation, and real time display many testing curves of force-displacement, force-time, stress-strain. These curves automatically switch. Testing process control and data processing conform to the requirements of International standards. This machine is beautiful, multifunctional, safe and easy. Parameters: WDW-1 WDW-2 WDW-5 Maximum force: 1KN 2KN 5KN Accuracy: í_í+1% (0.5% as special order) Measuring range of force (KN): 0.2%--100%FS Resolution of force: 1/200000 of maximum force and no subsection of all scale Accuracy of displacement measuring: í+0.5% Resolution of displacement: 0.03ª¦m Speed adjusting range of displacement: 0.001-500mm/min Accuracy of deformation measuring: í+0.5% Range of deformation measuring: 2%í½100%FS Speed adjusting range of force; 0.005-5%F.S / S Speed controlling accuracy of force: ¿Qí+2.0% of the set value (speedú+0.05%FS/S) ¿Qí+0.5%/í+1.0% of the set value ( speed¿R0.05%FS/S) Speed adjusting range of deformation: 0.005-5%FS/S Speed controlling accuracy of deformation:¿Qí+2.0% of the set value (speedú+0.05%FS/S) ¿Q í+0.5% of the set value ( speed¿R0.05%FS/S) Valid tension testing space: 800 Compression testing space: 700 Clamping sample: Flat and round sample Power supply: 380V/220ú¼50/60Hz Working environment: Room temperature 10íµí½30íµ, relative humidityí_80% Base configuration : Panasonic servo motor, precision photoelectric encoder Weight(Kg): 300
Test load: 0.098N (10gf), 0.246N (25gf), 0.49N (50gf), 0.98N (100gf), 1.96N (200gf), 2.94N (300gf), 4.90N (500gf), 9.80N (1000gf) Leus/indenter switch: With hand Turret Carriage control: Automatic loading and unloading method Magnification of microscope: For measurement: 400X (Object lens 40x , eyepiece 10x) For observation:200X (object lens 20x, eyepiece 10x) Load holding time: 5-60 second Measuring microscope: Min measuring unit: 0.0625um Testing field: 1-2967HV Micro test table: Dimensions 100x100mm Movement: 25mm in X&Y axis Max. height of specimen: 70mm ; Max. depth of specimen: 95mm Output: Installed with innner-printer and RS232 interface ; Power Supply: AC110V/220V 60/50HZ Dimensions: (L ) 425 X (W) 245X (H)490mm; Gross Weight:: 42KG, Net Weight: 35KG
2m transmission analyzer Basic functions 2m measurement Hdb3 and ami line codes Out-of-service 2mb/s, n*64kb/s ber testing In-service framed and unframed double-channel testing Pcm simulator''mode testing Frame data control and monitoring Timeslot activity monitoring, fas, n-fas, ts16mfo analysis Built-in 64kb/s tone channel listen capability Cas and ccs signaling generation and monitoring Round trip delay measurement Aps delay measurement Extensive error and alarm generation Vf tone generation and measurement Level measurement Pulse mask measurement Jitter measurements to itu-t standard o. 172 Frequency and offset measurement Clock slip measurement Up to +/-999ppm transmit clock deviation Clock source: internal, interface or external 2m clock/signal Real-time transmit circuit open/short indication
Product Description TLD1500 Series is high quality of Optical Fiber Checker. It contains the most advanced laser technology and microelectronics technology, and can be measured with various fiber optic adapter with 2.5mm common Interface. It is very convenient for them to check the single-mode and multimode fiber. Features High visible red laser output Easy-to-use "quick access" interface Small size, light weight, high reliability Battery for power supply Suitable for all 2.5 mm optical fiber connector Applications Fiber production and research devices Fiber network testing and maintenance Optical communication teaching and test
Product Features; Six Impact Devices are available for special applications(D,DC,D+15,C,DL,G) Direct display of hardness scales HRB,HRC,HV,HB,HS,HL; Software to connect with PC and Dataview for PC operation; Automatic identification Impact Devices and test direction (Except G); Software data and upperlower limits setting and sound alarm; Time and date setting; auto-clock; On-Board memory holds 240-1000 groups of data; Integral thermal printer, print all test results and histogram; For all metallic materials; Li Battery , low voltage indication and sound alarm; LCD with blue back-light, showing all functions and parameters; Wide measuring range; Long standby time and stable performance of field work; Technical specifications: Hardness Scale:HL,HRC,HRB,HV,HB,HS Accuracy:í+4HLD(760í+20HLD) repeatability of displayed value Standard Impact Device:D limits set measuring range:(170~960)HLDD Optional Impact Devices:C DC D+15 DL G Operating Temperaturee:0~40 Statistics Function:Average Max Min calculation,limits setting and alarm Testing direction:Automatic Min.thickness of hardened:0.8mm Chargeing time:3~5hours Power:Li Battery 4.2V/1600mAh Charger:5V/500mA Overall Dimensions:147*69*23mm Weight:186g Computer Interface:RS232 Min.Workpiece thickness:5mm (D DC DL D+15)1mm (C)10mm (G) memory:240~1000 groups Min.Workipece Weight:2~5Kg on stable support 0.05~2Kg with compact coupling Min.Radius of Workpiece:Rmin=50mm(with support ring Rmin=10mm) Max.Workpiece Hardnesss:996HV (D DC D+15 DL C) 646HB (G) Continuous Working Time:About 200hours
Six impact devices are available for special applications(d, dc, d+15, c, dl, g) Direct display of hardness scales hrb, hrc, hv, hb, hs, hl; Software to connect with pc and dataview for pc operation; Automatic identification impact devices and test direction (except g); Software data and upperlower limits setting and sound alarm; Time and date setting; auto-clock; On-board memory holds 240-1000 groups of data; Integral thermal printer, print all test results and histogram; For all metallic materials; Li battery , low voltage indication and sound alarm; Lcd with blue back-light, showing all functions and parameters; Wide measuring range; Long standby time and stable performance of field work;
