Rating voltage:380v dynamo type:y100l-6class rating power:3.Kw raating frequency:50hz 680*500*600 130kg
Main parameters: 1)external dimension 1020× 1040× 2480mm 2)principal vibration style table vibration 3)nominal pressure 16mpa 4)vibration frequency 60hz 5)pallet size 680× 540mm 6)gross power 17kw 7)shape period 20-25sec
Main parameters: 1)external dimension 2270× 1470× 2480mm 2)principal vibration style table vibration 3)nominal pressure 16mpa 4)vibration frequency 60hz 5)pallet size 860× 540mm 6)gross power 19kw 7)shape period 20-25 seconds 8)overall weight --3800kg
Main parameters: 1)external dimension 2350× 1650× 2610mm 2)principal vibration style table vibration 3)nominal pressure 16mpa 4)vibration frequency 65hz 5)pallet size 860× 540mm 7)gross power 26kw 8)shape period 12-15sec 9)overall weight-- 6800kg
Main parameters: 1). External dimension 3025*2310*2590mm 2). Principal vibration style table vibration 3). Nominal pressure 16mpa 4). Vibration frequency 50-70hz 5). Pallet size 900× 800mm 6). Gross power 30kw 7). Shape period 12-15sec 8). Overall weight-- 9300kg
Performance & general features Power supply:Three-phase 380V/660V, 50Hz/60Hz accept customization Polarity:2, 4, 6 and 8 standard poles Functioning:Continuous Duty: S1 Centrifugal force: 1KN-200KN Range of output:100W-15KW Speed:700rpm-3000rpm Insulation class:Class B,Class F Level of protection:IP 54,IP55 Electric motor:Three-phase asynchronous motor Wooden crate
Mineral fiber board is a kind of newly decorative material in the world,more and more people realise its superiority.It is widely used in luxury building for fireproofing,damp proofing,heat preservation,sound absorbing and environmental protection performances. It has the features of low investment ,easy to operate ,space small ,and high efficiency.
Paper gypsum board production line is the equipment which produces new building materials--paper gypsum board.Its production process is:ripe gypsum, water and all kind of ingredients that automatically precision measurement, by the continuous, automatic transmission system into the mixture into a homegeneous slurry spred to the continuous movement forward in the gypsum board surface of the paper, in advance process, after shock, the slurry was complete encapsulation of paper from top to bottom.And squeezed into the very rules slab, the slab continuous production line in the strict control of the speed and speed and stability to continue to move forward gradually formed a certain itensity, and shape the rules of wet gypsum board, the cut precision control system set by the precise cut into veneer.Veneer orderd by the control system topology, turning it over into the dryer.The drying temperature is strictly controlled, the board absorbed water lost to evaporation.Plate from the dryer, and advance the process of gradually cooling down the production line.After turns hostile every two stiff surface to fold once more gathers, saws after the reason the board both sides shuts off the regular size, transmits to the automatic hay stacker, piles up the end product waregousing.This prouduction line mainly by three major part is composed, namely.Material room, heating system, integral unit.
Model:rdcm350-11dhb(jzr350) Power: 15hp Hopper hoisting system hydraulic tipping system Power source: diesel engine/water-cooled Capacity (unmixed): 500 liter / 17.5 cft Capacity (mixed): 350 liter / 12.5 cft Mixing time: 45 sec. Water tank volume: 65 litres Max. Aggregate dia. 60mm Max. Trailed speed: 20km/h Capacity per hour: 15 cum / 530 cuf Driving axle two wheel or four wheel Dimension: 3250*2240*3200mm Weight: 1840kg Dimension: 3250*2240*3200mm Weight: 1840kg
It is a new model for installation and maintenance of highway anti-collision guardrail post and beam newly developed according to usersf+ needs. (the equipment has obtained the national patent, no.: zl 01 263422.0). The functions of this product are the same as njj series truck-mounted pile drivers. It adopts independent diesel engine as its driving force. The driving speed is 40-60 km/h. The equipment integrates pile driving and pile extracting, with 240fp rotating device. The equipment does not need turn the direction during driving and drawing the guardrail post on both sides. The equipment can operate independently when separated with the chassis, can adjust the hydraulic driving directions. It is equipped with brake device which is safe and reliable in operation. Main technical specifications Type of hydraulic hammer Tdb180 Tdb230 Size (lf+wf+h) Mm 4200f+1800 f+2800 4200f+1800 f+2800 Engine power Kw 16.2 20 Radius of gyration Mm 2100 2100 Lateral distance Mm 860 860 Highest working height Mm 4680 4680 Working pressure Mpa 16 16 Pile extracting force Kn 78.4 96.5 Impact frequency Hz 5.8-13 10-15 Working height of hydraulic hammer Mm 700-3000 700-3000 Speed Km/h 40-60 40-60. Export adn sea-worthy standard special packaging.
It is a new product developed by us. The product claims good mobility, low oil consumption and reliable brake system. The cab can hold 5 persons, with air conditioning device and can carry installing and repairing materials such as guardrail posts and beams of around 2.5 ton. The chassis of the truck mounted pile driver is isuzu brand vehiclef+s chassis. Special mounted equipment is national patented product, the patent no. Is zl 01 263422.0. The special hydraulic equipment has appropriative tools, which can do pile driving and pile extracting for guardrail post easily, with turning around of 240fp, so that it is unnecessary to turn the direction of the truck-mounted pile driver when driving and drawing the posts on both sides. With the characters of easy operation, convenient repairing and good reliability, the product can greatly reduce the working strength, improve the installing and maintenance quality and speed, thus being the best product for installation and maintenance of highway guardrail post and beam. The product has been widely applied to the dozens of highway in the country; all these products are quite welcomed by users. Main technical specifications Item Unit Njj5071tqx Njj5072tqx Type of chassis Nkr77lllwcjay Nkr77lllwcjay Weight Kg 4300 4350 Max. Weight Kg 6500 6550 Max. Load Kg 2200 2200 Person capacity Person 5 5 Size (lf+wf+h) Mm 6250f+1880f+2850 6250f+1880f+2850 Max. Speed Km/h 95 95 Rated power Kw 96 96 Rotating speed R/min. 2999 2999 Working pressure Mpa 16 16 Pile extracting force Kn 78.4 96.5 Working height of hydraulic hammer Mm 700-3000 700-3000.
The product is mainly applied to repair the crashed and wave shape guardrail beam of highway through 6/7/8/9/10 rollers and accessorial equipment to carry out the reshaping and recovery of guardrail beam of highway, avoid the crook or twist of guardrail beam, thus enabling them to be reused. This is the most perfect equipment in the world with stabilizing performance, easy operation, economical and high efficiency. Main technical specifications Rectifying speedtheoretical speed: 3-5m/min. Roller diameter++80 mm Roller quantity6/7/8/9/10 Rated power30 kw Rated revolving speed132-1320 r/min. G.W.5000 kg Size of working platform450f+500f+4000 mm 450f+500f+2000 mm Working circumstanceheight above the sea levelfn1500m Temperature of circumstance:-20f+f++45f+ Relative humidityfn98%. Export and sea-worthy standard wooden case.
Dimensions w-d-h : 170cm x 97cm x 150cm Gross weight : 720 kg Spraying capacity : 7 cubic meter per hour Output hose diameter : 2 + inch Air consumption : 11-14 cubic meter per hour @ 7 bar Main motor power : 7.5 kiloWatts Voltage / frequency: 380 v / 50 hz Total consumption : 8.2 kiloWatts Rotor volume 15 litres Rotor speed : 12 rpm Working temperature : -20 to 80 C¦.
Fs2 Spec/model Fs2 Crimping force(ton) 280 Max hose diameter 2f+f+ 6sp/ 3f+f+2sp Dies included 12 Max opening with dies +50mm Die loading *qct option Pump(/option/) 10/(2s) Motor:380v 3 phase Siemens Power option 230v/380v 3ph only Crimping/hour max 1300 Length mm 850 Width mm 650 Height mm 1550 Weight kg 1398. Crimping machine accessories Model Capacity Type Cutter sc76 3f+f+ wire hydraulic hose Automatic Cutter sc51 2f+f+ wire hydraulic hose Automatic Skiver 51 2f+f+ hose skiving Hose marker Manual/pneumatic(automatic) Testing bench(stain steel) 0-230 mpa Hose cleaning machine Up to 2f+f+ hydraulic hose with fittings Water jet Control option: the price of plc control option(big touch screen for automatic setting and ease of use) for s series are available.We use high quality and durable siemens plc systems and touch screen.*qct(quick die change system include quick change die fork, quick change dies, quick die change stand). Note: price and specification may change at any time without prior notification. Larger crimping range or full customized solutions available upon request. Dies for air condition hose, gas hose or other metal tubing dies are available upon request.
S 38 Spec/Model $38 Crimping force(ton) 280 Max Hose Diameter 11/2f+f+ Dies included 10 Max opening with dies +20mm Die loading Fork Pump(/option/) 5 Motor:380V 3 Phase Siemens Power option 230V 1PH/24V DC/12V DC Crimping/hour MAX 450 Length mm 650 Width mm 450 Height mm 600 Weight KG 196. Crimping Machine Accessories Model Capacity Type Cutter SC76 3f+f+ wire hydraulic hose Automatic Cutter SC51 2f+f+ wire hydraulic hose Automatic Skiver 51 2f+f+ hose skiving Hose marker Manual/Pneumatic(automatic) Testing bench(stain steel) 0-230 Mpa Hose cleaning machine Up to 2f+f+ hydraulic hose with fittings Water jet Control option: The price of PLC control option(Big touch screen for automatic setting and ease of use) for S series are available.We use high quality and durable Siemens PLC systems and touch screen.*QCT(quick die change system include quick change die fork,quick change dies,quick die change stand). Note: price and specification may change at any time without prior notification. Larger crimping range or full customized solutions available upon request. Dies for Air condition hose,Gas hose or other metal tubing dies are available upon request.
S 51 Spec/Model $51 Crimping force(ton) 320 Max Hose Diameter 2 Dies included 13 Max opening with dies +24mm Die loading Fork Pump(/option/) 5 Motor:380V 3 Phase Siemens Power option 230V 1PH/24V DC/12V DC Crimping/hour MAX 650 Length mm 650 Width mm 450 Height mm 850 Weight KG 280. Crimping Machine Accessories Model Capacity Type Cutter SC76 3f+f+ wire hydraulic hose Automatic Cutter SC51 2f+f+ wire hydraulic hose Automatic Skiver 51 2f+f+ hose skiving Hose marker Manual/Pneumatic(automatic) Testing bench(stain steel) 0-230 Mpa Hose cleaning machine Up to 2f+f+ hydraulic hose with fittings Water jet Control option: The price of PLC control option(Big touch screen for automatic setting and ease of use) for S series are available.We use high quality and durable Siemens PLC systems and touch screen.*QCT(quick die change system include quick change die fork,quick change dies,quick die change stand). Note: price and specification may change at any time without prior notification. Larger crimping range or full customized solutions available upon request.
Fs3 Spec/model Fs3 Crimping force(ton) 420 Max hose diameter 3f+f+6sp Dies included 13 Max opening with dies +50mm Die loading *qct option Pump(/option/) 25 Motor:380v 3 phase Siemens Power option 230v/380v 3ph only Crimping/hour max 1460 Length mm 800 Width mm 800 Height mm 1650 Weight kg 1500. Crimping machine accessories Model Capacity type Cutter sc76 3 wire hydraulic hose Automatic Cutter sc51 2 wire hydraulic hose Automatic Skiver 51 2 hose skiving Hose marker manual / pneumatic (automatic) Testing bench (stain steel) 0-230 mpa Hose cleaning machine up to 2 hydraulic hose with fittings Water jet Control option: the price of plc control option(big touch screen for automatic setting and ease of use) for s series are available.We use high quality and durable siemens plc systems and touch screen.*qct(quick die change system include quick change die fork, quick change dies, quick die change stand). Note: price and specification may change at any time without prior notification. Larger crimping range or full customized solutions available upon request. Dies for air condition hose, gas hose or other metal tubing dies are available upon request.
Dongfeng Cummins engine(180HP), Meritor axle, No-spin differential, Hangzhou Advance gearbox WG180, with ZF technology, equipped with ac, blade width: 3965mm. Dimension:(CM)913.2*261*344 NET WEIGHT:15500 kg.
According to the machine's process, the gypsum board production line can be divided into five parts: Ingredient and shaping system, centralized control system, auto board-enter, auto board-exit and drying system. The preparation, shaping, drying process is highly automatic, even the beginner can operate it. Auto board-enter system: Auto board cutter, belt conveyor, roller, board turnover machine, kiln enter distributor, faster board-enter and other equipment, through PLC auto control, the process of cutter, speed-up, kiln enter of gypsum board is finished.
2 Tons - 4 Meters. 2t/4m.
