ELY1000: Ice Capacity:1000 kg Total Tray Surface Area:100 m2 Fresh Food Capacity:950-1050 kg Evaporator Temperature:-45C Number of Shelves:40 Shelf Spacing:50 mm Shelf Heating Type:Liquid Shelf Temperature:-30/+100 �°C Tray Quantity:228 + 228 Tray Dimensions (w*d*h):460*960*20 mm Vacuum Pump:Roots Tip Vacuum Value:20 Well Compressor:wish Refrigerant Gas:R404A Energy Consumption (Average):155 kWh Programming:12 Steps / 10 Recipes Material:AISI 304 Producer:Pard Mhendislik
1600W, 5L Touch Screen display 60 -200 adjustable temperature 120 minutes timer Drawer with visible window Auto shut off for safety
-Water-proof, oil-proof, non-stick, heat proof -No need to cut or measure, simply place the paper liner on the tray or basket, and put enough food on the paper to cook. The food stains, grease, oil left on the liner. -Protect the air fryer inner surface from food mess and sticking -Multiple sizes, round or square to choose from
-Air fry with up to 75% less fat than traditional frying methods. -Includes multiple versatile cooking programs -The combination of low fan speed and low temperature enables thorough dehydration.
A multi-function machine: a variety of cooking methodsâ??â??roasted, fried, baked, steamed, thaw, etc. 360°three dimensional heating, Food baking dry thaw, radiation-free, Microcrystal line high Borosilicate glass. 60-minute Timer: arbitrarily set the time required, according to different ingredients and menus.
Qingjiang 110Y-7 is a 2-step oil press, ca press several kinds of materials like canola, soybean, sunflower, palm, coconut, etc. Capacity is 250-300 kg/h for hot press. In cold press, if pressing twice, capacity is 120-150kg/h. This is also a classic type.
Qingjiang 110 oil press machine,capacity is 6-7 tons per day for hot press. It's a multi- functional one, which can press several kinds of oil seeds.It's a 2-step oil press machine.
Efficiency for cold press is much higher. If you press twice, capacity is 75-110kh/h; if press third times, capacity is 50-70 kg/h. Spare parts are all carburized which is much durable. Motor and motor fundation is equipped as your needs. Color can be green or beige. And all your requirements can be customrized.
Capacity of this oil press is 100-200kg/h,. It's a 2-step oil press and can also be used in both cold press and hot press. This machine can press rapeseed oil, groundnut oil, sunflower oil, flaxseed oil, coconut oil, palm oil, etc. Motor can be 7.5-11kw and voltage is according to your demands.
This is our 6YL-95Y oil press, capacity is 150-220kg/h, which can be used in both cold press and hot press. It's multi-functional, can be used in pressing several materials, like soybean,sunflower, canola,flaxseed, etc.With high efficiency and duriability, it's greatly welcomed by iur customers,
Offering you a complete choice of products which include automatic pasta machine, macaroni making machine, ss pasta extruder machine, electric pasta extruder machine, industrial pasta extruder machine and pasta making machine. Product Details: We are among the reputed organizations, highly engaged in providing an optimum quality range of Automatic Food Processing Machine. Voltage (V) Phase Frequency (Hz) Material SS Usageis the art and technique 380V to 480V 3 Phase 50Hz /60Hz SS Industrial
Because of the varied growing and harvesting seasons of different vegetables at different locations, the availability of fresh vegetables differs greatly in different parts of the world. Processing can transform vegetables from perishable produce into stable foods with long shelf lives and thereby aid in the global transportation and distribution of many varieties of vegetables. The goal of processing is to deter microbial spoilage and natural physiological deterioration of the plant cells. Generally, the techniques include blanching, dehydrating, canning, freezing, fermenting and pickling, and irradiating.
There are a few different pieces of equipment that you can use to cool your field corn. We can help you pick out the product that is right for you: Room Cooling Because you donot want field corn to get too cold, using room cooling may be sufficient. Forced-Air Cooling Again, without getting it too cold, forced-air cooling may be the right cooling method for field corn. No matter which method you decide to use for your field corn cooling and storage, you have to make sure to get the best equipment. Because this type of corn is getting ready to be put to uses besides being directly consumed, it has to undergo different kinds of prolonged storing and cooling. Work with us to get the customized equipment that will make your after harvest handling of field corn much simpler.
Snacks Processing Lines Our range of products include Banana Chips Processing Line, Frozen French Fries Production Line, Peanuts Processing Line, Potato Flakes Processing Line, Potato Chips Processing Line and Frozen French Fries Processing Line. Stainless Steel Banana Chips Processing Line, For Industrial, Capacity: 50-100 Kg Per Hour Frozen French Fries Production Line Peanuts Processing Line Potato Flakes Processing Line
Fruit puree and sugar are dosed on scales or loading cells, they're mixed together and processed by our cooker and vacuum evaporator. This unit is suitable to produce jams, but also sauces and seasonings and it is available in different capacities, from 100 to 2.000 kg/batch.
Meat & Fish Process High-moisture extrusion processing can be used to create plant-based meat and seafood textures. During extrusion, proteins undergo thermal and mechanical stresses by heating of the barrel and shearing of the screws. As a result, protein structure is altered leading to the formation of soluble and/or insoluble aggregates. By attaching a long cooling die to the end of the extruder (as shown in the photograph on this page), proteins can be aligned in the flow direction forming an anisotropic protein network.
We provide ginger garlic paste making and packing unit. And also to make powder of spices ,weighing and packaging unit. Equipment by changing different feeding system, can for liquid, paste, powder, block of different materials such as automatic quantitative vacuum packing, equipped with automatic feeding machine is able to block material after weighing and vacuum packaging, If there are empty bags and not on the bag and other abnormal situations, PLC can judge the abnormal situation, and then output abnormal signals, control the packaging machine to take corresponding measures to avoid waste of materials and bags.
These plant are being used for production feed for cattle`s such as buffalo`s, sheep, horses, cows and goats etc. These plants are widely appreciated for their sturdy construction and durability. Our plants are specifically designed for application in maize and soya plants. We ensure the feasibility of the plant management.
Novel Refractance Film Dryer is a Contact Infrared Film Drying Method which is most efficient, cost effective drying method in use today. The Novel Refractance Film Dryer is a new type of dryer where liquid foods, purees and slices are dried on one side of a thin plastic film using hot water. Our Novel Refractance Film Dryer are suitable for Fruit and vegetables purees, Single Strength Purees, Concentrated purees, Chunky purees, Fruit & Vegetable Leather, Juices, Seed Pulp, Sliced Fruits and Vegetables, Meat and poultry purees and Broths, Fish- Purees and Broths, Egg Products Egg Powder, Dairy Products including Dairy Cultures, Cereals, Grains and Starches, Beverages- Concentrates and Mixes, Nutraceuticals-Proteins Powder, Pharmaceuticals, Algae, Fine Chemicals. Main advantages of the Novel Refractance Film Dryer are use of low temperature drying to dry delicate, heat-sensitive products in a short duration. Drying take place at atmospheric pressure to retain product color, flavor aroma and nutritional content values (up-to 94% of Vitamin C). The dryer has Low-operating and energy costs.
HDMS-LSX600P If you have demand, you can contact me at any time. We will reply you as soon as possible. . Welcome to inquire. The product introduce: The ultrasonic cutting assembly line uses ultrasonic energy for cutting and processing equipment to achieve the purpose of cutting food. The ultrasonic vibration of the cutting knife makes the friction resistance very small. It does not require a sharp blade and great pressure when cutting. and will not cause the edge collapse and damage of the cutting material. The cutting surface is smooth and neat, and the cut material is not easy to stick to the blade. For food that cannot be cut by traditional cutting machine, it can also complete cutting work with high standards, especially for frozen, viscous and elastic materials. The machine is designed as a servo driven conveyor belt through system, servo blade actuator, ultrasonic cutting system, interlocking safety protection device, and it is easy to clean. Realizing automatic and continuous cutting. The ultrasonic food cutting line can be used independently or connected to the production line. Advantages of ultrasonic food cutting assembly line: 1. Ultrasonic cutting reduces friction, with fine incision, no debris, no deformation, no cross color, and smooth and beautiful cutting surface. 2. The machine adopts titanium alloy blade, which is completely inert and durable. It is not easy to stick the blade during cutting, and is suitable for cutting sticky and elastic food, multi-layer sandwich cake, etc. 3. The cutting range is wide, such as mousse cake, Swiss roll, dough, egg tarts, candy, cheese, butter, sandwiches, pizza, bread, biscuits, chocolate, pies, nougat, sesame sugar, Shaqima, Napoleon, thousand layer cake, pudding cake, brownie, rice cake, jujube cake nut food, baked food, various cakes, soft, crisp, sticky food, etc. 4. There are many choices for cutting mode, such as sheet, strip, roll, block, etc. 5. The machine can realize continuous cutting, fast cutting speed, automatic and intelligent operation, and save labor costs. 6. The machine can be used as a stand-alone or embedded solution, with dual choices. 7. The machine is stable in working condition, suitable for long time continuous work, and has high working efficiency. 8. In the process of machine cutting, the food to be cut is moved in parallel or in parallel order, which reduces the downtime. 9. Siemens servo control, high durability, low failure rate, accurate positioning, and minimal error in the cutting process. 10. The machine is equipped with sensors to position and cut the products to improve production efficiency. 11. The machine can match a variety of specifications, which can be customized according to customer requirements.
