Printing Inks Suppliers and Manufacturers

we exclusive Block Printing on Lenin Fabrics

Name of product:- Printing Ink Product origin:- Ahmedabad, Gujarat,India Product specifications:- Solvent based printing ink, Customization available as per client´s requirements. Packaging details:- 20 Liters drum.

We have developed seaweed-based ink, that is edible and biodegradable. The ink is our first generation, but start from the first step of our development, environmental impact and price affordability are still our priorities. HS Code: 32159090 our inks are edible and biodegradable, madefromseaweed and food colors. instruction for use : 1 sachet (25 g) of inkpowderwith 1cup (220 ml) of water, mix it withsmoothiesblender, and the ink is ready for use. 1 sachetinkpowder is enough to print 500 a4 of oursheet. our ink is packed in our sachet, sothat bothinkandthe packaging are ecofriendly. our inks are available in 4 colors : blue, black, yellow, and red. all are applicable for our sheet, paper, andfabric.when you use it for temporary spanduk, youcaneasily wash the fabric and reuse it. by doingso, youreduce fabric waste, that will be microfiberandpolluting the environment. As Powder: You have to mix 100 g of ink powder with 1 L of water, mix it with smoothies blender, and the ink is ready for use. 100 g of ink powder is enough to print 2000-2500 A4 of our sheet. Price: IDR 50k/100g ink powder Equipment you need: Smoothies blender Screen printing equipment (we can help you to source it if needed).

My color ink has a longer shelf life High quality at affordable prices Print fluency MOQ 1000 Liters Prices varies with quantity

Vibrant, brilliant colors and Excellent color gamut Completely free of Hazardous Air Pollutants (HAPs), as defined in the Federal 1990 Clean Air Act,. Color and density consistency between different batches Two-year outdoor weather resistance Minimum maintenance whether the printer is in use or idle No clogged nozzles thus ensuring excellent print quality on a wide range of vinyl and paper substrates More than 24 months outdoor life and less wear on the print heads 1.Name of product : Eco solvent ink 2.Price of product: $16 3.Place of origin :China 4.key features : 5.HS Code : 3215 9000 6.MOQ : 1000 liters 7.Packaging details:plastic container 1L and 5L sizes

Printing Parameters Squeege:  60-65 SHORE Mesh:  120/inch Tension:� 25 N/cm2 Clean Up:  Water Strokes:  3 Rounds:  2 Printing Application 1. Blow dry print in between rounds using hairdyer or other methods. 2. Allow for 2 â?? 4 hours ambient drying. 3. Heat cure at 130 â?? 160oC for 2 minutes. 4. Allow for 24 hours after heat cure before any physical testing of prints. Formulation White Print White: 97% Fixer: 3% Colour Print White: 15-20% Clear: 70-75% Colour Pigment: 5-7% Fixer: 3%

Printing Parameters Squeege:  60-65 SHORE Mesh:  120/inch Tension:� 25 N/cm2 Clean Up: Water Strokes:  3 Rounds:  2 Printing Application 1. Blow dry print in between rounds using hairdyer or other methods. 2. Allow for 2 â?? 4 hours ambient drying. 3. Heat cure at 130 â?? 160oC for 2 minutes. 4. Allow for 24 hours after heat cure before any physical testing of prints. Formulation White Print White: 97% Fixer: 3% Colour Print White: 15-20% Clear: 70-75% Colour Pigment: 5-7% Fixer: 3%

Printing Parameters Squeege 60-65 SHORE Mesh:  120/inch Tension:� 25 N/cm2 Clean Up: Water Strokes: 3 Rounds:  2 Printing Application 1. Blow dry print in between rounds using hairdyer or other methods. 2. Allow for 2 â?? 4 hours ambient drying. 3. Heat cure at 130 â?? 160oC for 2 minutes. 4. Allow for 24 hours after heat cure before any physical testing of prints. Formulation White Print White: 97% Fixer: 3% Colour Print White: 15-20% Clear: 70-75% Colour Pigment: 5-7% Fixer: 3%

Printing Parameters Squeege:  60-65 SHORE Mesh: 120/inch Tension: 25 N/cm2 Clean Up:  Water Strokes:  3 Rounds  2 Printing Application 1. Blow dry print in between rounds using hairdyer or other methods. 2. Allow for 2 4 hours ambient drying. 3. Heat cure at 130 160oC for 2 minutes. 4. Allow for 24 hours after heat cure before any physical testing of prints. Formulation White Print White: 97% Fixer: 3% Colour Print White: 15-20% Clear: 70-75% Colour Pigment: 5-7% Fixer: 3%

Printing Parameters Squeege: 60-65 SHORE Mesh: 120/inch Tension:� 25 N/cm2 Clean Up: Water Strokes: 3 Rounds: 2 Printing Application 1. Blow dry print in between rounds using hairdyer or other methods. 2. Allow for 2 â?? 4 hours ambient drying. 3. Heat cure at 130 â?? 160oC for 2 minutes. 4. Allow for 24 hours after heat cure before any physical testing of prints. Formulation White Print White: 97% Fixer: 3% Colour Print White: 15-20% Clear: 70-75% Colour Pigment: 5-7% Fixer: 3%

Printing Parameters Squeege:70-75 SHORE Mesh: 120 - 190/inch Tension:� 25 N/cm2 Clean Up: Water Strokes: 3 Rounds: 2 Printing Application 1. Blow dry print in between rounds using hairdyer or other methods. 2. Allow for 2 4 hours ambient drying. 3. Heat cure at 130 160oC for 2 minutes. 4. Allow for 24 hours after heat cure before any physical testing of prints. Formulation White Print White: 97% Fixer: 3% Colour Print White: 15-20% Clear: 70-75% Colour Pigment: 5-7% Fixer: 3%

Printing Parameters Squeege:70-75 SHORE Mesh: 120 -190/inch Tension:� 25 N/cm2 Clean Up: Water Strokes: 3 Rounds: 2 Printing Application 1. Blow dry print in between rounds using hairdyer or other methods. 2. Allow for 2 - 4 hours ambient drying. 3. Heat cure at 130 - 160oC for 2 minutes. 4. Allow for 24 hours after heat cure before any physical testing of prints. Formulation White Print White: 97% Fixer: 3% Colour Print White: 15-20% Clear: 70-75% Colour Pigment: 5-7% Fixer: 3%

Printing Parameters Squeege:70-75 SHORE Mesh: 120 - 190/inch Tension:� 25 N/cm2 Clean Up: Water Strokes: 3 Rounds: 2 Printing Application 1. Blow dry print in between rounds using hairdyer or other methods. 2. Allow for 2 - 4 hours ambient drying. 3. Heat cure at 130 - 160oC for 2 minutes. 4. Allow for 24 hours after heat cure before any physical testing of prints. Formulation White Print White: 97% Fixer: 3% Colour Print White: 15-20% Clear: 70-75% Colour Pigment: 5-7% Fixer: 3%

Printing Parameters Squeege:70-75 SHORE Mesh:  120 190/inch Tension: 25 - 35 N/cm Clean Up: Water Strokes: 3 Rounds: 2 Printing Application 1. Blow dry print in between rounds using hairdyer or other methods. 2. Allow for 2 - 4 hours ambient drying. 3. Heat cure at 130 - 160oC for 2 minutes. 4. Allow for 24 hours after heat cure before any physical testing of prints. Formulation White Print White: 97% Fixer: 3% Colour Print White: 15-20% Clear: 70-75% Colour Pigment: 5-7% Fixer: 3%

Printing Parameters Squeege:60-65 SHORE Mesh: 120/inch Tension:� 25 N/cm2 Clean Up: Water Strokes:  3 Rounds:  2 Printing Application 1. Blow dry print in between rounds using hairdyer or other methods. 2. Allow for 2 4 hours ambient drying. 3. Heat cure at 130 160oC for 2 minutes. 4. Allow for 24 hours after heat cure before any physical testing of prints. Formulation White Print White: 97% Fixer: 3% Colour Print White: 15-20% Clear: 70-75% Colour Pigment: 5-7% Fixer: 3%

Printing Parameters Squeege:60-65 SHORE Mesh: 120/inch Tension:� 25 N/cm2 Clean Up: Water Strokes: 3 Rounds: 2 Printing Application 1. Blow dry print in between rounds using hairdyer or other methods. 2. Allow for 2 4 hours ambient drying. 3. Heat cure at 130 160oC for 2 minutes. 4. Allow for 24 hours after heat cure before any physical testing of prints. Formulation White Print White: 97% Fixer: 3% Colour Print White: 15-20% Clear: 70-75% Colour Pigment: 5-7% Fixer: 3%

Printing Parameters Squeege:60-65 SHORE Mesh: 120/inch Tension: 25 N/cm2 Clean Up: Water Strokes: 3 Rounds: 2 Printing Application 1. Blow dry print in between rounds using hairdyer or other methods. 2. Allow for 2 4 hours ambient drying. 3. Heat cure at 130 160oC for 2 minutes. 4. Allow for 24 hours after heat cure before any physical testing of prints. Formulation White Print White: 97% Fixer: 3% Colour Print White: 15-20% Clear: 70-75% Colour Pigment: 5-7% Fixer: 3%

Printing Parameters Squeege:70-75 SHORE Mesh: 120 - 190/inch Tension: 25 N/cm2 Clean Up: Water Strokes: 3 Rounds: 2 Printing Application 1. Blow dry print in between rounds using hairdyer or other methods. 2. Allow for 2 -4 hours ambient drying. 3. Heat cure at 130 - 160oC for 2 minutes. 4. Allow for 24 hours after heat cure before any physical testing of prints. Formulation White Print White: 97% Fixer: 3% Colour Print White: 15-20% Clear: 70-75% Colour Pigment: 5-7% Fixer: 3%

Printing Parameters Squeege: 60-65 SHORE Mesh: 120/inch Tension:� 25 N/cm2 Clean Up: Water Strokes: 3 Rounds: 2 Printing Application 1. Blow dry print in between rounds using hairdyer or other methods. 2. Allow for 2 4 hours ambient drying. 3. Heat cure at 130 160oC for 2 minutes. 4. Allow for 24 hours after heat cure before any physical testing of prints. Formulation White Print White: 97% Fixer: 3% Colour Print White: 15-20% Clear: 70-75% Colour Pigment: 5-7% Fixer: 3%

Printing Parameters Squeege: 60-65 SHORE Mesh: 120/inch Tension:� 25 N/cm2 Clean Up: Water Strokes: 3 Rounds: 2 Printing Application 1. Blow dry print in between rounds using hairdyer or other methods. 2. Allow for 2 - 4 hours ambient drying. 3. Heat cure at 130 -160oC for 2 minutes. 4. Allow for 24 hours after heat cure before any physical testing of prints. Formulation White Print White: 97% Fixer: 3% Colour Print White: 15-20% Clear: 70-75% Colour Pigment: 5-7% Fixer: 3%