Series Double flanged butterfly valve Size: DN40-DN1200/1.5"-48" End flange: ANSI B 16.1, ASTM B 16.47, EN 1092, AS 2129, ISO PN10/16, JIS B2212/2213, BS 10 Table D, BS 10 Table E, BS4504 Face to face: ANSI B 16.10, API 609, BS5155 Short, ISO5752(Series 13), DIN3202 F16 Top flange: ISO 5211 Normal pressure: DN40-DN600(1.5"-24") PN1.0/1.6MPa(150/200PSI) DN700-DN1200(28"-48") PN1.0MPa(150PSI) Body: Cast Iron/Ductile Iron/WCB/Carbon steel/AL-Bronze/CF8, SS304/CF8M, SS316 Disc: Ductile Iron/Ni-plated ductile iron/Nylon-plated ductile iron/AL-Bronze/Rubber lined Disc/1.2501/1.4529/CF8/CF8M/Hastelloy Alloy/Monel Stem: SS416/SS304/SS316/SS431/17-4pH/Monel/Carbon steel 45/45# Seat: NBR/Hypalon/EPDM/Neoprene/NR/Wear-Resistant EPDM/Viton/Silicon/Heat-Resistant EPDM/White EPDM/EPDM/PTFE Suitable temperature: Normal Temperature -45 ~150 Medium: Fresh water, sewage, sea water, air, vapor, food, medicine, oils, alkalis, salt etc.
Polyethylene pressure pipes PE-100 for sewerage systems. Polyethylene pressure pipes for sewerage are used for construction and repair of outdoor pipelines, transporting water of household and drinking supply.Leading raw suppliers are European manufacturers SABIK, TOTAL. Pipes are made of polyethylene PE 100 class and correspond to standard dimension ratio SDR 41 - SDR 6, with nominal diameters from25to500 mm, including main working pressures 4; 6; 8; 10; 12,5; 16; 20 bar. Pipes, produced in linear segments, have the length 12 m (or another by agreement with the customer). Pipes with diameter not more than 160 mm can be produced in hanks (cylinders) from 50 to 1000 m. Pipes with diameter up to 110 can be connected by means of mechanic (compression) fittings. Polyethylene pipes of major diameters are connected mainly by means of jam-weld or by means of thermistor fittings that requires special welding equipement. Such connection is monolithic and considered to be the most reliable. -------- Polypropylene casing pipes with connecting threads for the construction of water supply wells and also production wells. The sinking of wells using casing pipes allows to avoid groundwater pollution, and also increase the speed of sinking thanks to reduced diameter in comparison with usual steel pipes. Blue casing pipesfor wells have the following diameters: Pipes are made of copolymere propylenes, which have better mechanical and ecological chracteristics than PVC pipes for wells. ------- Two-layered fluted polymeric pipes for outdoor sewerage (POLYCORR). Polymeric pipes corresponds to the requirements of European standard project EN1401-1; 1999,material for pipes production-block-copolymer polypropylene PP of leading European manufacturers BASELL,?V?.Nominal bore D 200, 300, 400, 500, 600, 800,? type of tube, circular rigidity SN4, SN8,SN16. Pipes produced by means of continuos extrusion method, have double closed structure of wall. The smooth inner surface and the corrugated outer wall. Pipes are connected by means of flayers, produced on the pipes during production process. The color of standard pipes and molded pieces for sewerage -ginger, the color of inner walls of pipes - white. PP pipes are designed for nonramming underground systems of public sanitary and storm water drainage.
Pecifications Place of origin:shandong, china (mainland) Brand name:oem Plastic modling type:blow molding Item:europe market flexible dish washer hose Size:customize Usage:dish washer Type:flexible hose Color:customize Material:customize Quality:rohs Feature 1:durable Feature 2:anti-aging Feature 3:health -
Type:washing machine parts, drain hose connector Place of origin:shandong, china (mainland) Brand name:oem Model number:dhl54851 Product name:pp plastic pipe connector fitting washing machine hose parts Material:pp, pe Color:can be customized Size:can be customized Certificationrohs Length:can be customized Thickness:can be customized Moq:2000piece Capacity:200000 piece/day -
Type:washing machine parts, hose Place of origin:shandong, china (mainland) Brand name:oem Model number:dhl12596 Item:home appliance blow molding plastic flexible hose Size:customize Usage:home appliance Application:plastic flexible hose Material:plastic Quality:rohs Feature 1:flexible Feature 2:anti-aging Feature 3:blow molding plastic -
Type:washing machine parts, drain hose Place of origin:shandong, china (mainland) Brand name:oem Model number:dhl4521 Item:high performance drain hose washing machine part Application:washing machine part Usage:washing machine Color:white/gray Material:pp+pte Quality:rohs / ul Feature 1:flexible Feature 2:high performance Feature 3:rohs quality -
Type:other home appliance parts, cold water drain hose Place of origin:shandong, china (mainland) Brand name:oem Model number:dhl51423 Item:all home appliance plastic parts flexible home appliance outlet pipe Size:customize Usage:washing machine Color:white/gray Material:eva Quality:rohs / ul Feature 1:flexible Feature 2:anti-aging Feature 3:south-america standard -
Type:washing machine parts, washing machine hose Place of origin:shandong, china (mainland) Brand name:oem Model number:dhl75896 Item:high performance washing machine drain hose Size:customize Usage:washing machine Color:white/gray Material:eva/pp Quality:rohs / ul Feature 1:uniform thickness Feature 2:anti-aging Feature 3:high performance -
Name: ANSI b 16.5 Flate Pipe Fittings Flange Size : DN 80 Pipe Outer diameter :88.9mm Flange outer diameter : 190mm Flange inside diameter :94mm Fillet :4mm Bevel edge :4mm Flange thickness :18mm Material: 304/L/H, 316/L/H, 20#15CrMo , 1Cr18NiTi etc. Standard: GB,JB, HGJ,SHJ, ANSL,ASME and national standard . Certificate: ISO 9001: 2000 & CE Certified Application Range: chemical, petroleum, electric power, shipbuilding, metallurgy, new energy source. The Flange We Can Provide: 1) ANSI B16.5, A105 Class 150, Class300, Class600, Class900, Class1500, Class2500, WNRF, SORF, BLRF, THRF, SWRF, LJRF Carbon Steel Flange 2) Din2573 Pn6 Slip-On, Din2576 Pn10 Slip-On, Din2543 Pn16 Slip-On, Din2544 Pn25 Slip-On, Din2545 Pn40 Slip-On, Din 2527 Blind, Din2631-2635 Welding Neck , Rst37.2 Or C22.8 3) JIS Ss400 Or Sf440a 5k 10k 16k 20k 30k SOPFF, SOHFF, BLFF 4) Uni2276 2277 2278 6084 6089 6090 2544 2282 6091-6093 (Rst37.2, S235jrg2, A105 )Carbon Steel Flange 5) En1092 Pn6 Pn10 Pn16 Pn25 Pn40 Pn64 Pn100 Pn160 Type01, Type02, Type05, Type12, Type13 Carbon Steel Flange 6) Bs4504 Sani1123 1000/3, 1600/3, 2500/3, T/D, T/E, T/F Carbon Steel Flange 7) As2129 Table D, Table H, Table E Carbon Steel Flange 8) GOST 12820-80, 12821-80 Table D, E, H Carbon Steel Flange Non Standard: According to the drawing size from 10mm to 5000mm, weight from 0.5kg to 30tons(300000kg) Usage: 1. Connecting pipe line and keep its leakproofness; 2. Convenient for replacing pipe line; 3. Easy to separate and check the situation of pipe line; 4. Easy to seal pipe line, such as oil, petroleum, gas, chemical industry, nuclear power station, water and nuclear power construction, shipbuilding, food manufacturing, construction, shipbuilding, paper making, medicine, and other industries.
Material: pvc Diameter: 10-800mm Thickness: 1.5-30mm Length: 4m, 6m/pc or as required Working pressure: 0.6-2.5mpa Color: white, gray Certification: iso Life span: 50 years Packing: in bulk Shipment: by sea or air Sample: free sample available Moq: 500m Payment: t/t or l/c at sight
Material: pvc Inner size: 5-50mm Outer size: 10-60mm Thickness: 2-5mm Length: 30m/roll or as required Working pressure: 0.1-10bar Color: blue, green, orange Certification: iso Packing: plastic film/cartons, or pallets Shipment: by sea or air Sample: free sample available Moq: 500kgs
Stainless steel 45 degree pipe fitting lateral tee 1/2" tee 3 way threaded pipe fittings stainless steel ss 304 Features: Shape: couple (female x female x female ) Connection:npt-npt-npt Max pressure:150 psi Material: 304 stainless steel Measurement: 1/2" Length:51mm Package include: 1 piece x tee 3 way f/f/f female threaded pipe fitting stainless steel ss 304 Precision cnc machining. Your parts and fittings will be done right! always. Creative ideas inc. And its affiliated factories (also known as cii china) is a manufacturer and exporter of water fountain nozzles, garden sprinklers and sprayers, metal cnc fittings and hvac-r parts, such as plugs, caps, union t, quick couplers, access valves (charging valves for ac), etc. That are made of copper, brass, stainless or carbon steel. Other size is available too, pls feel free to contact us !
Conductive GRE pipe - Glassfibre Reinforced Epoxy Pipe length: Spool pipe: length upon client requirement Manufacturing techniques: With design set linear and thickness, filament winding control by computer and curing/carbon fiber Raw materials : Epoxy Resin/ Anhydride curing agent/fiberglass direct roving Standard: API 15HR/API 15LR/IMO A.753 Fittings: All the fittings match to equivalent pipes, with matched thread specification and pressure rating Connection: Adhesive/ taper-taper Color: Blue/original Color/ or client nominated color Application Ballast system Petroleum cargo lines Portable discharge lines Air vent and sounding system Anti Rolling & Anti Heel cross Stripping lines Deck hot air drying Advantages Keep pipeline free of accumulation of potential static electrical charges Excellent chemical resistance property, Able to withstand high pressure Higher transportation efficiency Light weight-easy to install Able to connect with steel pipe directly Lower abrasion coefficient, Smoothly inner wall, no scaling, no waxing Longer service life that is 4 to 5 times compare to steel pipe(about 20 years) Low maintenance cost
Diameter ranges : DN40-DN800 length: Full length pipe: length from 8.85 to 11.85m, nominal is 9.14m Spool pipe: length upon client requirement Manufacturing techniques: With design set linear and thickness, filament winding control by computer and curing Raw materials : Epoxy Resin/ Anhydride curing agent/fiberglass direct roving Fittings: All the fittings match to equivalent pipes, with matched thread specification and pressure rating Connection: Thread connection :Bell and Spigot thread /Coupling thread (API 8 rd 10 rd thread, use our own designed thread sealant for seal) Key-lock and O-ring connection Color: Blue/original Color/ or client nominated color Application Injection and delivery pipeline Crude oil Brine transport pipeline Oilfield sewage, chemical sewage and wastewater process pipeline Polymer solution transmission pipeline Slotted liner and sieve vessels Natural gas CO2 or H2S gathering and transport lines Other liquids processing pipeline Advantages Excellent chemical resistance property, Able to withstand high pressure Higher transportation efficiency Light weight-easy to install Able to connect with steel pipe directly Lower abrasion coefficient, Smoothly inner wall, no scaling, no waxing Longer service life that is 4 to 5 times compare to steel pipe(about 20 years) Low maintenance cost
Amine cured GRE pipe - Glassfibre Reinforced epoxy Pipe ength: Full length pipe: length from 8.85 to 11.85m, nominal is 9.14m Spool pipe: length upon client requirement Manufacturing techniques: With design set linear and thickness, filament winding control by computer and curing Raw materials : Epoxy Resin/ Anhydride curing agent/fiberglass direct roving Standard: API 15HR/API 15LR Fittings: All the fittings match to equivalent pipes, with matched thread specification and pressure rating Connection: Thread connection :Bell and Spigot thread /Coupling thread (API 8 rd 10 rd thread, use our own designed thread sealant for seal) Key-lock and O-ring connection Color: Blue/original Color/ or client nominated color Application Injection and delivery pipeline Crude oil Brine transport pipeline Oilfield sewage, chemical sewage and wastewater process pipeline Polymer solution transmission pipeline Slotted liner and sieve vessels Natural gas CO2 or H2S gathering and transport lines Other liquids processing pipeline Advantages Excellent chemical resistance property, Able to withstand high pressure Higher transportation efficiency Light weight-easy to install Able to connect with steel pipe directly Lower abrasion coefficient, Smoothly inner wall, no scaling, no waxing Longer service life that is 4 to 5 times compare to steel pipe(about 20 years) Low maintenance cost
Home > products > plastic coated corrugated pipe Hot dipped plastic coating steel corrugated pipes A green plastic coated steel corrugated pipe in integral style with flange plates is placed on the floor in the workshop. Hot dipped plastic coated steel corrugated pipe in integral style Hot dipped plastic coating steel corrugated pipe is a new kind of products. And our company is the one and only manufacture of this product domestic at present. We have already applied for a patent certificate. The base material of this pipe is steel and the interior and exterior surface sides is coated polyethylene (pe) or epoxy (ep). It enjoys the advantage of both plastic pipes and steel corrugated pipes. The advantage contains high mechanical strength, anticorrosion, easy installation, quick construction, long using life etc. It is very suitable for buried pipes instead of cement pipes and box culvert. It is the national popularized environment protection product. Usage Municipal engineering and construction: civic buried water (rain or sewage) drainage, utility tunnel, cable protection, checking well, tower crane cofferdam, vertical pile shell. Road and railway: culvert, passage, bridge, tunnel overhaul, temporary road, leakage well, etc. Coal mine: minerals transferring pipes, passages for persons and machines, mine shaft, etc. Public construction: power plan flue pipes, granary, cement bin, gasometer, fermentor, wind, turbine corrugated steel sleeve pipe, etc. Martial use: military channel, air defence channel, exit channel. Product advantage The hot dipped plastic coating steel corrugated pipes have both rigidity and flexibility. The construct is reasonable for loading. The loading to it will be uniform distribution. It is deformation resistant. The strength of hot dipped plastic coating steel corrugated pipe is much higher than similar type common plain pipes. The construction use this pipe can save much material and reduce works invest cost.
Spiral rib pipe can solve your storm water problems with the improved hydraulics Spiral rib pipe is our innovative flexible metal pipe that combines the proven strength of corrugated metal pipe with the flow capacity of a smooth inner wall. That is to say the product has two layers: the first layer is a smooth interior corrugated steel pipe and the second layer is a smooth steel liner providing for improved hydraulics. It is also called smooth wall spiral rib pipe or double wall corrugated steel pipe. It is economical and easy to install. It combines the advantages of many piping varieties into one revolutionary product. Spiral rib pipe is lightweight, easy to use and install, high strength, long-lasting and with superior performance therefore it is the perfect pipe that used for storm water sewer systems, culverts and drainage systems.
Gate valves are suitable for full-on, full-off flow control.Turning the handle counterclockwise to raise the disc, allowing flow through a straight passageway. Turning the handle clockwise to lower the disc, impeding flow. Specification: Name: marine gate valve Material:cast iron , stainless steel , bronze , cast steel Working pressure: 5k, 10k, 20k, 40k Size:d n25 ~ dn800 Sandard: jis, din, gb Lead time: around 35 days Certificate: abs , bv , ccs , dnv , gl , lr , kr , nk , rina , rs
Name:twin screw multiphase pump Operating limits: Capacity 10 to 1, 000 Head 4 to 35 m Discharge flange size 5 to 14 in pressure up to 4mpa Temperature up to 150 Characteristics: 1. Conveying liquid stationary, no pulse, no stirring, little vibration, low noise. 2. Have very strong self-priming performance, heterogeneous mixing to lose, gas rate is not higher than 80%, sand content not higher than 500 3. The outer bearing structure, adopt independent lubrication, can transport all kinds of lubricity medium. 4. The synchronous gear drive, two rotor between contact, even for a short time idle also just as well.
Tees for pipe fittings. Also called pipe tees.Three-way joint, with the main line to branch office.Tee is a three hole, namely an import, two exits; or two import, an export of a chemical pipe fittings, t and y-shaped, size orifice, nozzles with different diameters, for three of the same or different lines of the Survey Office. Tee's main role is to change the direction of flow. http://www.sellsteels.com/steel-fitting/tees.html
