INCOLOY ALLOY 020 is a nickel-chromium-iron-molybdenum alloy with excellent resistance to corrosion in a wide range of environments. This alloy has a high nickel content, which provides superior resistance to oxidizing chemicals and reduces the risk of stress corrosion cracking. INCOLOY ALLOY 020 also has high resistance to pitting and crevice corrosion, making it ideal for use in harsh chemical processing environments. In conclusion, INCOLOY ALLOY 020 is a highly versatile alloy with excellent corrosion resistance and mechanical properties, making it suitable for use in a variety of industries and applications. Incoloy alloy 020 is also known as Alloy 20. Here are some international standards and specifications for this alloy: American standards: ASTM B473, ASTM B462, ASTM B729, ASTM B464, ASTM B729, ASTM B366, ASTM B462, ASTM B463, ASTM B464, ASTM B468, ASTM B729, ASTM B729, ASTM B729, ASTM B462, ASTM B729, ASME SB-473, ASME SB-462, ASME SB-729, ASME SB-464, ASME SB-366, ASME SB-462, ASME SB-463, ASME SB-464, ASME SB-468, ASME SB-729, ASME SB-729, ASME SB-729, ASME SB-462, ASME SB-729 European standards: EN 2.4660, EN 2.4663 German standards: DIN NiCr20CuMo, DIN 2.4660, DIN 2.4663 British standards: BS NA 24 Japanese standards: JIS NW 024 (similar to Alloy 20) It's important to note that these standards may have slightly different compositions or properties than Incoloy alloy 020/Alloy 20, so it's important to verify that they meet your specific requirements before specifying them. Regenerate response We can provide the following the form:Incoloy alloy020 coil; Incoloy alloy 020 strip;Incoloy alloy 020 plate; Incoloy alloy 020 sheets; Incoloy alloy 02 tube; Incoloy alloy 020 pipe; Incoloy alloy 020 flat; Incoloy alloy 020 bar BS:NA 24/JIS:NW024/UNS:N08020/W.Nrï¼?2.4663 INCOLOY ALLOY 020 is widely used in a variety of industries due to its excellent corrosion resistance and high strength. Some common applications include: Chemical processing: INCOLOY ALLOY 020 is frequently used in chemical processing equipment such as heat exchangers, tanks, and piping. Oil and gas: INCOLOY ALLOY 020 is used in oil and gas production due to its resistance to sulfur-containing gases and high temperatures. Power generation: INCOLOY ALLOY 020 is used in power generation equipment such as boilers, steam generators, and turbine components due to its high strength and corrosion resistance. Marine: INCOLOY ALLOY 020 is used in marine environments due to its resistance to seawater and other harsh corrosive environments.
Incoloy alloy G-3 is a highly corrosion-resistant nickel-chromium-iron alloy. It is designed for use in highly aggressive environments, such as chemical processing plants, petrochemical refineries, and nuclear power plants. The alloy exhibits excellent resistance to both oxidizing and reducing acids, as well as to chloride-containing solutions. Conclusion Incoloy alloy G-3 is a highly corrosion-resistant nickel-chromium-iron alloy that exhibits excellent resistance to both oxidizing and reducing acids, as well as to chloride-containing solutions. The alloy has high strength and excellent toughness, even at high temperatures, and is used in a wide range of applications in highly aggressive environments. Incoloy alloy G-3 is a nickel-chromium-iron alloy with additions of molybdenum and copper. Here are some international standards and specifications for this alloy: American standards: ASTM B582, ASTM B462, ASTM B472, ASTM B366, ASTM B462, ASTM B463, ASTM B472, ASTM B574, ASTM B575, ASME SB-582, ASME SB-462, ASME SB-472, ASME SB-366, ASME SB-462, ASME SB-463, ASME SB-472, ASME SB-574, ASME SB-575 European standards: EN 2.4619, EN 2.4650 German standards: DIN NiCr23Mo16Cu, DIN 2.4619, DIN 2.4650 British standards: BS NA 24 Japanese standards: JIS NW 6200 We can provide the following the form:Incoloy alloyG-3 coil; Incoloy alloyG-3 strip;Incoloy alloy G-3 plate; Incoloy alloy G-3 sheets; Incoloy alloy G-3 tube; Incoloy alloy G-3 pipe;Incoloy alloy G-3 flat; Incoloy alloy G-3 bar BS:NA 24/JIS:NW 6200/UNSN06985/W.Nr:2.4619 Incoloy alloy G-3 is used in a wide range of applications, including: Chemical processing plants: The alloy is used in equipment such as heat exchangers, valves, pumps, and reactors that are exposed to highly corrosive acids and other chemicals. Petrochemical refineries: Incoloy alloy G-3 is used in equipment such as distillation columns, piping, and heat exchangers that are exposed to high temperatures and corrosive chemicals. Nuclear power plants: The alloy is used in equipment such as steam generators and reactor vessels that are exposed to high temperatures and radiation.
Incoloy Alloy 901 is a high-strength, heat-resistant nickel-iron-chromium alloy with excellent mechanical properties and resistance to oxidation and corrosion at elevated temperatures. This alloy is often used in gas turbine engines and industrial furnace components.Conclusion: Incoloy Alloy 901 is a high-strength, heat-resistant nickel-iron-chromium alloy with excellent mechanical properties and resistance to oxidation and corrosion at elevated temperatures. It is commonly used in gas turbine engines, industrial furnace components, and aerospace applications. With its exceptional mechanical properties and chemical composition, it is a reliable and durable material for a wide range of demanding applications. Incoloy alloy 901 is a nickel-iron-chromium alloy with additions of titanium and aluminum. Here are some international standards and specifications for this alloy: American standards: AMS 5660, AMS 5661, AMS 5662, AMS 5700, AMS 5714, AMS 5870, AMS 5898, ASTM B462, ASTM B473, ASTM B649, ASTM B670, ASME SB-462, ASME SB-473, ASME SB-649, ASME SB-670 European standards: EN 2.4662 German standards: DIN NiCrFeTiAl, DIN 2.4662 British standards: BS HR 51 Japanese standards: JIS NW 4899 We can provide the following the form:Incoloy alloy901 coil; Incoloy alloy901 strip;Incoloy alloy901 plate; Incoloy alloy901 sheets; Incoloyl alloy 901 tube; Incoloy alloy 901 pipe;Incoloy alloy 901 flat; Incoloy alloy901 bar BS:HR 51/JIS:NW 4899/UNS:N09901/W.Nr:1.4898 Incoloy Alloy 901 is widely used in gas turbine engines, industrial furnace components, and aerospace applications due to its excellent mechanical properties and resistance to oxidation and corrosion at high temperatures. Some of its typical applications are as follows: Gas turbine engines: Incoloy Alloy 901 is used in the hot sections of gas turbine engines, such as combustion liners, transition ducts, and afterburner parts, where high strength and resistance to oxidation and corrosion are required. Industrial furnace components: Incoloy Alloy 901 is used in the construction of high-temperature furnace components, such as radiant tubes, muffles, and fixtures. It offers excellent resistance to oxidation and corrosion, making it a reliable and durable material for these applications. Aerospace: Incoloy Alloy 901 is used in a variety of aerospace applications, including aircraft engine components, missile components, and rocket motor cases. Its high strength and excellent resistance to oxidation and corrosion make it a popular choice for these demanding applications.
Incoloy Alloy 902 is a high-strength, heat-resistant, and corrosion-resistant alloy material with excellent mechanical properties and oxidation resistance. It is an iron-based high-temperature alloy composed of elements such as chromium, nickel, molybdenum, copper, aluminum, titanium, and zirconium. The main features of Incoloy Alloy 902 include: Corrosion resistance: Incoloy Alloy 902 has strong corrosion resistance and can resist the corrosion of many strong acids, alkalis, and saltwater environments. Therefore, it is widely used in the chemical, marine, and petroleum industries. Oxidation resistance: Incoloy Alloy 902 has excellent oxidation resistance and can be used for a long time in high-temperature environments without failure. Therefore, it is widely used in equipment and devices operating in high-temperature oxidation environments. High-strength performance: Incoloy Alloy 902 has extremely high strength and hardness, can withstand high stress and high loads, and is therefore widely used in high-strength fields such as aerospace, nuclear industry, etc. Good machinability: Incoloy Alloy 902 has good machinability and can be formed and processed by various methods such as hot working and cold working, suitable for the manufacture of products in various shapes and specifications. In summary, Incoloy Alloy 902 is an excellent high-temperature alloy material with excellent corrosion resistance, oxidation resistance, and high-strength performance. It is widely used in the manufacture of equipment and devices operating in high-temperature, high-pressure, and corrosion-resistant environments. Incoloy alloy 902 is a nickel-iron-chromium alloy with additions of molybdenum and niobium. Here are some international standards and specifications for this alloy: American standards: AMS 5221, AMS 5223, AMS 5225, AMS 5226, AMS 5230, AMS 5231, AMS 5542, AMS 5676, AMS 5717, AMS 5718, AMS 5719, AMS 5738, AMS 5801, AMS 5803, AMS 5804, AMS 5806, AMS 5580, ASTM B366, ASTM B408, ASTM B564, ASTM B649, ASTM B670, ASME SB-366, ASME SB-408, ASME SB-564, ASME SB-649, ASME SB-670 European standards: EN 2.4665 German standards: DIN NiCr21Mo14W, DIN 2.4665 British standards: BS HR 202 Japanese standards: JIS NW 4990 We can provide the following the form:Incoloy alloy902 coil; Incoloy alloy902 strip;Incoloy alloy902 plate;Incoloy alloy902 sheets; Incoloy alloy 902 tube; Incoloy alloy 902 pipe;Incoloy alloy 902 flat; Incoloy alloy902 bar BS: HR 202/JIS:NW 4990/UNS:N09902/W.Nr:2.4665
Incoloy Alloy 908 is a high-temperature, high-strength, and highly corrosion-resistant alloy composed of elements such as nickel, chromium, molybdenum, and iron. It is a single-phase austenitic alloy, typically formed by casting and forging. Chemical composition: The chemical composition of Incoloy Alloy 908 is composed of elements such as nickel, chromium, iron, molybdenum, vanadium, manganese, tantalum, silicon, carbon, phosphorus, and sulfur. Nickel content is 40-45%, chromium content is 20-23%, iron content is 16-19%, and molybdenum content is 8-10%. Mechanical properties: Incoloy Alloy 908 has excellent high-temperature and high-strength performance. Its tensile strength is 135 ksi (930 MPa) (minimum), yield strength is 70 ksi (480 MPa) (minimum), and elongation is 25% (minimum). Physical properties: The density of Incoloy Alloy 908 is 8.14 g/cm�³, the melting point is 1338�°C (2440�°F), the thermal conductivity is 11.7 W/m�·K (100�°C), and the coefficient of thermal expansion is 13.7 �¼m/m-K (20-100�°C). Corrosion resistance: Incoloy Alloy 908 has excellent corrosion resistance, especially in high-temperature, high-pressure, and highly corrosive environments. It can withstand the corrosion of corrosive media such as sulfuric acid, hydrochloric acid, nitric acid, and fluoride, and can resist chloride stress corrosion cracking (SCC). The international standard designations for Incoloy alloy 908 include UNS N09908 and W.Nr. 1.4876. There are also corresponding standards and specifications in different countries and regions, such as AMS and ASTM standards in the United States, EN standards in Europe, and JIS and JPI standards in Japan. Here are the specific standards and designations for Incoloy alloy 908 in different countries: United States: AMS 5545, AMS 5546, AMS 5547, AMS 5549, ASTM B408, UNS N09908 Germany: DIN 17752, DIN 17753, DIN 17754, W.Nr. 1.4876 United Kingdom: BS HR 6 Europe: EN 10095 Japan: JIS H4551, JPI-SB46 We can provide the following the form:Incoloy alloy908 coil; Incoloy alloy908 strip;Incoloy alloy908 plate; Incoloy alloy908 sheets; Incoloy alloy908 tube; Incoloy alloy908 pipe;Incoloy alloy908 flat; Incoloy alloy908 bar GB:HR 6/JIS:H4551/UNS:N09908/W.Nr:1.4876
Project on:HQ-M2001 Product name: Basin faucet Function: Hot and cold Material: zinc alloy
Our company produces pipes and fittings of various materials, sizes and standard specifications In particular, some heavy industrial pipe fittings, as well as processing and production according to the drawings, are our strengths
BW PIPE FITTINGS ( ELBOWS, TEES, REDUCERS, CAPS, ETC.) AS PER ANSI B16.9 /DIN/ JIS /GOST and other standards, welcoming your detailed inquiry. Thanks! Skype: cnjune QQ: 2235192007 wechat: flange2235192007
Dear Friend, How are you? Our company has been operating in the auto parts industry for 24 years, supplying a wide range of high-quality products to customers worldwide. Our main products include engine bearing, piston ring, piston, oil pump, water pump, gasket, valves, and we can also supply other parts upon customer request. We pride ourselves on providing exceptional customer service and competitive prices. We understand the importance of quality control and ensuring that our products meet the highest standards. We have a team of experienced professionals who oversee the production process and ensure that each and every part meets the specifications and requirements of our customers. Thank you! We look forward to hearing from you soon. Best regards,
Flanges; These are fittings that are generally used in pipelines and ensure the sealing of content facilities.Stainless options are used at higher levels. In addition to its use in pipelines, its use is also common in machinery and installation elements. Flange Standards Flanges are produced subject to certain standards for ease of production and use and for the manufacturer and user to speak the same language and act according to certain standards. We can generally talk about 4 basic standards for flanges: 1-ANSI (American Standard) 2-PN (European Standard) 3-BS10 (UK and Australian Standard) 4-JIS (Japan and Korea Standard) In all these standards, different flange sizes are used depending on the temperature and pressure values â??â??of the installation. Therefore, it is not possible to use a flange of any standard with flanges of another standard. We provide flange production at all standards in our production.
Overview API Rotary Drilling Rubber Hose for Oilfield steel wire spiral 1.CONSTRUCTION: It is composed of an inner rubber protection layer, middle rubber layer, steel wire spiral layer and external rubber cover. 2.APPLICATIONS: Steel wire spiral drilling rubber hoses are used in oil fields, well cementing, well repairing, geological explorations, small drilling machine, and water conveyance at coal excavations. Used to carry slurry, water at environmental temperature, and other fluids. 3.Execution Specification: API SPEC 5CT, API SPEC STD 5B, API RP 5C1, API RP 5A5, API RP 5B1, API BUL 5C3 SY/T 6194-2003, GB/T 9253.2-1999, GB/T17745-1999, SY/T 6474-2000, GB/T18052-2000, SY/T 6328-1997
ID:63mm WAILL:5mm LH:102*102mm
Reinforcement: One high tensile steel wire braids Cover: abrasion, ozone and weather resistant synthetic rubber, MSHA approved Temperature range: -40F to +212F (+248F max.) R1-S-04 - 1/4" SAE 100R1 Hydraulic Hose (per foot)
Use: it is widely used in the production of concrete vibrators, flexible shaft pumps, various kinds of power tools and all non-lineal transmission tools. It is designed to protect the flexible shaft inside from damage and wear in revolution. Constructionï¼? Flexible hose is made of multi-layer materials. From outside to inside the materials consist of winding steel straps(made of cold rollled steel straps), rubber(winding straps are applied with a thin layer of strong rubber), canvas(the winding steel straps are wrapped with a layer of canvas), rubber(extruders add an even layer of sythetic rubber on the surface of canvas), braided steel wire(one layer or two steel wire are to be made out of the synthetic rubber with braiding machines), rubber(extruders add one even layer of synthetic rubber)
we could supply spiral welding perforated pipe and straight welding perforated pipe. The pipes can be customized according to buyer's request, including diameter, length, wall thickness, hole size and opening area.
We are professional manufacturer of Hose fittings parts with high quality and competitive price. 1. Produce all hose end fittings : mild steel fittings, stainless steel fittings, unions, compression unions, brass fittings, Tube nuts. Banjos..... 2. Hydraulic brake hose and air hose and hose assembly. 3. Teflon (PTFE) braided brake line with differ colors and fittings. 4.Low carbon welded steel tubing ,steel tubing, Copper tubing (4.76mm,6mm,6.35mm,8mm,9.35mm,12mm) 5. Machinery parts or other hardware parts .Our products have been exported to North America, Europe, Asia and Middle East area more 50 countries with high quality and good price ! Hope to hear from you soon. Good Business Start Here! Waiting for your early reply!
Full range of copper alloy pipe fittings. .
Threaded Class 2000-1/4 (DN6) to 4 (DN100) Class 3000-1/4 (DN6) to 4 (DN100) Class 6000-1/4 (DN6) to 4 (DN100) Socket Welded Class 3000-1/4 (DN6) to 4 (DN100) Class 6000-1/4 (DN6) to 4 (DN100) Class 9000-1/2 (DN15) to 2 (DN50) Specification: ASME B16.11 ASME B1.20.1 (NPT) Threaded DN Nom. Pipe size A C H G B L 2000 3000 6000 2000 3000 6000 2000 3000 6000 2000 3000 6000 6 1/8" 21 21 25 17 17 19 22 22 25 3.18 3.18 6.35 6.4 6.7 8 1/4'' 21 25 28 17 19 22 22 25 33 3.18 3.30 6.60 8.1 10.2 10 3/8'' 25 28 33 19 22 25 25 33 38 3.18 3.51 6.98 9.1 10.4 15 1/2" 28 33 38 22 25 28 33 38 46 3.18 4.09 8.15 10.9 13.6 20 3/4" 33 38 44 25 28 33 38 46 56 3.18 4.32 8.53 12.7 13.9 25 1" 38 44 51 28 33 35 46 56 62 3.68 4.98 9.93 14.7 17.3 32 1-1/4" 44 51 60 33 35 43 56 62 75 3.89 5.28 10.59 17.0 18.0 40 1-1/2" 51 60 64 35 43 44 62 75 84 4.01 5.56 11.07 17.8 18.4 50 2" 60 64 83 43 44 52 75 84 102 4.27 7.14 12.09 19.0 19.2 65 2-1/2 76 83 95 52 52 64 92 102 121 5.61 7.65 15.29 23.6 28.9 80 3'' 86 95 106 64 64 79 109 121 146 5.99 8.84 16.64 25.9 30.5 100 4'' 106 114 114 79 79 79 146 152 152 6.55 11.18 |18.67 27.7 33.0
Threaded Class 2000-1/4 (DN6) to 4 (DN100) Class 3000-1/4 (DN6) to 4 (DN100) Class 6000-1/4 (DN6) to 4 (DN100) Socket Welded Class 3000-1/4 (DN6) to 4 (DN100) Class 6000-1/4 (DN6) to 4 (DN100) Class 9000-1/2 (DN15) to 2 (DN50) Specification: ASME B16.11 ASME B1.20.1 (NPT) Threaded DN Nom. Pipe size A C H G B L 2000 3000 6000 2000 3000 6000 2000 3000 6000 2000 3000 6000 6 1/8" 21 21 25 17 17 19 22 22 25 3.18 3.18 6.35 6.4 6.7 8 1/4'' 21 25 28 17 19 22 22 25 33 3.18 3.30 6.60 8.1 10.2 10 3/8'' 25 28 33 19 22 25 25 33 38 3.18 3.51 6.98 9.1 10.4 15 1/2" 28 33 38 22 25 28 33 38 46 3.18 4.09 8.15 10.9 13.6 20 3/4" 33 38 44 25 28 33 38 46 56 3.18 4.32 8.53 12.7 13.9 25 1" 38 44 51 28 33 35 46 56 62 3.68 4.98 9.93 14.7 17.3 32 1-1/4" 44 51 60 33 35 43 56 62 75 3.89 5.28 10.59 17.0 18.0 40 1-1/2" 51 60 64 35 43 44 62 75 84 4.01 5.56 11.07 17.8 18.4 50 2" 60 64 83 43 44 52 75 84 102 4.27 7.14 12.09 19.0 19.2 65 2-1/2 76 83 95 52 52 64 92 102 121 5.61 7.65 15.29 23.6 28.9 80 3'' 86 95 106 64 64 79 109 121 146 5.99 8.84 16.64 25.9 30.5 100 4'' 106 114 114 79 79 79 146 152 152 6.55 11.18 |18.67 27.7 33.0 Notes: 3) Dimensions in Millimeters. 4) Other information please contact BNK for further assistance
Full coupling ,half coupling,reducing coupling and cap Threaded Threaded Class 3000-1/4 (DN6) to 4 (DN100) Class 6000-1/4 (DN6) to 4 (DN100) Specification: ASME B16.11 ASME B1.20.1 (NPT) Threaded DN Nom.pipe size W P D G B L2 3000&60003000 6000300060003000 6000 6 1/8" 32 19 16 4.8 6.4 6.7 8 1/4'' 35 25 27 19 25 4.8 6.4 8.1 10.2 10 3/8'' 38 25 27 22 32 4.8 6.4 9.1 10.4 15 1/2" 48 32 33 28 38 6.4 7.9 10.9 13.6 20 3/4" 51 37 38 35 44 6.4 7.9 12.7 13.9 25 1" 60 41 43 44 57 9.7 11.2 14.7 17.3 32 1-1/4" 67 44 46 57 64 9.7 11.2 17.0 18.0 40 1-1/2" 79 44 48 64 76 11.2 12.7 17.8 18.4 50 2" 86 48 51 76 92 12.7 15.7 19.0 19.2 65 2-1/2" 92 60 64 92 108 15.7 19.0 23.6 28.9 80 3'' 108 65 68 108 127 19.0 22.4 25.9 30.5 100 4'' 121 68 75 140 159 22.4 28.4 27.7 33.0
