Printing grade frosted PC film suitable for special printing, helmets, signs, nameplates, protective covers, etc. Anti-scratch PC film Uses: window lenses for electronic products such as mobile phones, MP3, MP4, DVD, backlight sources, etc. It has excellent physical and mechanical properties, especially excellent impact resistance, high tensile strength, flexural strength and compressive strength; good heat resistance and low temperature resistance, stable mechanical properties in a wide temperature range, size Stability, electrical properties and flame retardancy, can be used for a long time at -60~120; no obvious melting point, melted at 220-230; high rigidity, high viscosity of resin melt; low water absorption and small shrinkage , Small creep, high dimensional accuracy, good dimensional stability, low permeability of the film; it is a self-extinguishing material; stable to light, but not resistant to ultraviolet light, good weather resistance; oil resistance, acid resistance.
"Mat black PVC film sheet roll PVC-MSH-026" parameter description Is it in stock: Yes Certification: ROHS, UL, REACH Material: Polyvinyl chloride PVC Processing method: Extrusion Type: Thermoplastic Model: PVC-MSH-026 Size: 026 Black PC roll Features: The product has excellent appearance characteristics, not only durable, but also extremely easy to print. It does not need surface pretreatment and special ink, and it can show good ink adhesion. Uses: Widely used in membrane switches, instrument switches, brackets, commercial and communication equipment, POP display panels, medical diagnostic equipment, automotive instruments, etc. Existing specification coil: 930mm wide Appearance: black one side glossy and one side matte Brand: Dan Mason
Uses: Widely used in membrane switches, instrument switches, brackets, commercial and communication equipment, POP display panels, medical diagnostic equipment, automotive instruments, etc. PC film (also called polycarbonate film, because the thickness is relatively thin, generally called film or sheet below 1.0mm, generally called pc board above 1.0): PC film thickness is between 0.125 and 1.0, with smooth and frosted , There are coils and sheets. There are sheets and coils. The sheets are one by one. The coil has a certain width and a length of several hundred meters. The general thickness is: 0.125, 0.175, 0.2, 0.25, 0.3, 0.375, 0.5, 0.7, 0.8, 1.0. Among them, 0.125, 0.175, 0.2, 0.25, 0.3, 0.375, etc. are mainly coiled materials, while other thicknesses are mainly sheet materials
Is it in stock: Yes Certification: UL, ROHS, REACH Type: Polycarbonate PC Processing Method: Film Press Color: Black Model Number: pc-fr-020 Specifications: Any cutting according to customer requirements Trademark: Dan Mason Packaging: stretch film Yield: 10000000000 Detailed introduction of "fire retardant pc film pc-fr-020" Fire retardant PC film Fire retardant pc film pc-fr-020. The thickness of the pc film is between 0.125 and 1.0, with smooth and frosted surfaces, and there are coils and sheets. There are sheets and coils. The sheets are one by one, and the coil is a certain width and a length of several hundred meters long; The thicknesses are: 0.125, 0.175, 0.2, 0.25, 0.3, 0.375, 0.5, 0.7, 0.8, 1.0. Among them, 0.125, 0.175, 0.2, 0.25, 0.3, 0.375, etc. are mainly made of coils, while other thicknesses are mainly made of sheets PC sheet is mainly used in optical electronics, medical equipment, high-speed rail aviation, printing anti-counterfeiting, led display, automotive industry and electronics, electrical industry, liquid crystal display and industrial machinery parts, mirror plating, various signs, printing, membrane switch backlight Window lenses, special printing, helmets, signs, nameplates, protective covers, power system insulation, disk drive insulation, keyboard insulation, TV/monitor insulation, computer motherboard insulation, electronic components, electrical enclosures, switch panels and other electronic products , junction box and charger shell, automotive instrumentation and panel printing with flame retardant requirements, electronic packaging, luggage, sports equipment, instrument panels, auto parts, controller panels, membrane switches, electrical products, etc., optical accessories, optical display , flat panel display, high-speed rail aviation, medical equipment, lighting film, surgical light film, electrical panel, nameplate, protective mask, sun hat, sunglasses, mobile phone, mp3, mp4, dvd, etc.
Black PP sheet: mainly coarse sand, fine sand, double light, single light, single mirror sand, etc.; can be used for leather bags, leather goods, insulating gaskets, electronic nameplates, electronic gaskets; cosmetics, food, clothing, stationery, hardware products And other high-end packaging, it can also be used for screen printing, light boxes, picture albums, folder covers, picture album covers, etc. PP film application 1) Stationery includes: PP folder, PP file bag, PP business card case, PP briefcase, PP pencil case, PP pencil case, PP data book, PP page card, PP separator, PP notebook cover, PP bookshelf, PP Writing pad, PP wall calendar, PP desk calendar, PP advertising umbrella, PP mouse pad, PP stationery portable box and other stationery products. 2) Gift categories include: PP gift box, PP cosmetic box, PP gift bag, PP handbag, PP handbag bottom liner, PP petticoat, PP glasses case, PP glasses display stand, PP toy box, PP tissue box and other packaging. 3) Food categories include: PP placemats, PP coasters, PP drinking cups, PP bowls, PP candy boxes, PP candy bags, PP wine boxes, PP wine bags, PP cutting boards, etc. 4) Lighting categories include: PP shade 5) Electronic products include: PP electronic intermediate film board, PP electronic packaging box, etc. 6) Footwear and clothing include: PP clothing box, PP clothing handbag, PP clothing drawing board, PP clothing list, etc. PP shoe box, PP shoe lining, PP shoe pattern drawing board, etc. 7) Other PP products include: PP supermarket hanger, PP luggage list, PP road sign, PP drawer, PP raincoat box, PP photo frame, etc.
Black PP sheet: mainly coarse sand, fine sand, double-gloss, single-gloss, single-mirror sand, etc.; can be used for leather bags, leather goods, insulating gaskets, electronic nameplates, electronic gaskets; cosmetics, food, clothing , stationery, hardware products and other high-end packaging, can also be used for silk screen printing, light boxes, picture albums, folder covers, album covers, etc. PP film sheet application 1) Stationery includes: PP folder, PP file bag, PP business card case, PP briefcase, PP pencil case, PP pencil holder, PP data book, PP paging card, PP separator, PP notebook cover, PP book holder, PP writing board, PP wall calendar, PP desk calendar, PP advertising umbrella, PP mouse pad, PP stationery portable box and other stationery products. 2) Gift categories include: PP gift box, PP cosmetic box, PP gift bag, PP handbag, PP handbag bottom liner, PP lining strip, PP glasses box, PP glasses display stand, PP toy box, PP tissue box and other packaging. 3) Food categories include: PP placemats, PP coasters, PP drinking cups, PP bowls, PP candy boxes, PP candy bags, PP wine boxes, PP wine bags, PP cutting boards, etc. 4) Lighting categories include: PP lampshade 5) Electronic products include: PP electronic interlayer board, PP electronic packaging box, etc. 6) Shoes and clothing categories include: PP clothing boxes, PP clothing handbags, PP clothing drawing boards, PP clothing listings, etc. PP shoe box, PP shoe lining, PP shoe pattern drawing board, etc. 7) Other PP products include: PP supermarket hanging strips, PP luggage listings, PP road signs, PP drawers, PP raincoat boxes, PP photo frames, etc.
parameter description Is it in stock: Yes Certification: ROHS, UL, REACH Material: Polyvinyl chloride PVC Processing method: Extrusion Type: Thermoplastic Model: PVC-MSH-015 Size: 0.15 Brand: Dan Mason Packing: Carton or stretch film Color: Double Sided Matte Black Yield: 100000000 Â detailed introduction Matte black PVC film sheet roll PVC membrane PVC (polyester fiber type) membrane material Classification According to the intensity level, it is divided into grades Explain that the fabric substrate of PVC film material should be polyester and polyamide fiber fabrics. The coating is mainly polyvinyl chloride (PVC) resin, and the weight of different coatings should be between 400 and 1500g/m2 according to functional requirements. PVDF), polypropylene resin (ACRYLIC), silicone resin, etc., and should have the function of improving the self-cleaning and anti-aging properties of PVC film materials. The thickness of the PVC film material should be greater than 0.5mm. The surface layer should have stable anti-corrosion and anti-ultraviolet erosion capabilities during the shelf life, and should have self-cleaning properties. Selection points 1) The surface layer of the PVC film material should have stable anti-corrosion and anti-ultraviolet erosion capabilities during the shelf life, and the surface should have self-cleaning properties. 2) After the PVC film material reaches the melting point in the fire environment, a melting hole will appear, and the boundary of the melting hole will burn and spread, but no open fire will be generated. According to my country's GB8624 "Classification Method of Combustion Performance of Building Materials", it is designated as B1 grade flame-retardant material.
Name: PET sheet, PET transparent sheet, PET film, PET coil, PET sheet with high transparency, PET film Thickness: 12 silk - 200 silk Width: 100mm 1100mm Process: Extrusion Color: transparent, porcelain white, color chips, customized according to user needs or samples use: 1. Vacuum forming: food packaging, toy boxes, stationery boxes, gift boxes and tools, hardware packaging; 2. Antistatic application: electronic parts packaging, permanent conductive sheet, permanent antistatic sheet, permanent semi-conductive sheet; 3. General purpose: blister, folding box, packaging, printing, card making, etc.
PET sheet is a new type of material developed in recent years. With its excellent toughness, high strength, high transparency, and excellent environmental performance that it can be recycled and reused, and does not produce harmful gases when burned, it has gradually been greatly appreciated by consumers and producers. Green ignorance; conform to the trend of environmental protection. PET sheet has the following main characteristics: 1. It has excellent transparency and smoothness, and has a good display effect. 2. Excellent surface decoration performance, can be printed without surface treatment, easy to emboss patterns, easy to metal treatment. 3. Has good mechanical strength. 4. Good barrier properties to oxygen and water vapor. 5. Good chemical resistance, can withstand the erosion of various chemical substances. 6. It is non-toxic and has reliable hygienic performance. It can be used for the packaging of food, medicine and medical equipment, and can be sterilized by gamma rays. 7. It has good adaptability to environmental protection, and can be recycled and reused economically and conveniently; when the waste is incinerated, it does not produce harmful substances that endanger the environment. The thermoforming performance is good, which is equivalent to ordinary PVC sheet, and PET thermoforming products with excellent performance can be obtained by vacuum forming; PET sheet is considered to be an ideal packaging material that meets the requirements of environmental protection. Performance parameters: 1. Density 1.33g/cm Oxygen permeability 4-4.5cm*mm/(m*24h*0.1mpa) 2. Tensile strength longitudinal 53MPA moisture permeability 3G*mm/(M*24H); transverse 53MPA maximum operating temperature is nearly 70 degrees 3. The elongation at break is 250% longitudinally and 250% laterally 4. Heating dimensional change longitudinal 5% transverse 5%
"PVC transparent film sheet PVC-TM-02" parameter description Is it in stock: Yes Certification: ROHS, REACH Material: PVC Processing method: Calendering method Type: Thermoplastic Model: PVC-TM-020 Specifications: 0.2mmx760mm Trademark: Dan Mason Packing: cardboard or carton Yield: 100000000 Detailed introduction of "PVC transparent film sheet PVC-TM-02" PVC film sheet The full name is Polyvinylchlorid, the main ingredient is polyvinyl chloride, and other ingredients are added to enhance its heat resistance, toughness, ductility, etc. PVC can be divided into soft PVC and hard PVC. Among them, hard PVC accounts for about 2/3 of the market, and soft PVC accounts for 1/3. Soft PVC is generally used for the surface of floors, ceilings and leather, but because soft PVC contains softeners (this is also the difference between soft PVC and hard PVC), it is easy to become brittle and difficult to store, so its scope of use is limited. Hard PVC does not contain softeners, so it has good flexibility, easy to form, not easy to be brittle, non-toxic and pollution-free, and has a long storage time, so it has great development and application value. The essence of PVC is a vacuum blister film, which is used for surface packaging of various panels, so it is also called decorative film and adhesive film, and is used in many industries such as building materials, packaging, and medicine. Among them, the building materials industry accounts for the largest proportion, at 60%, followed by the packaging industry, and several other industries with small-scale applications. PVC is a polyvinyl chloride plastic with bright color, corrosion resistance, firmness and durability. Due to the addition of some toxic auxiliary materials such as plasticizers and anti-aging agents in the manufacturing process, its products generally do not store food and medicine. The optimum molding temperature of PVC is 170â??-180â??, that is to say, the melt temperature is around 170â??-180â??. At this temperature, PVC becomes a viscous fluid state, and its physical properties reach the highest level. Thickness: 0.15MM-0.5MM Color: transparent Features: Cold resistance, low toxicity, etc. Uses: screen printing/pad printing/offset printing, high frequency voltage and sewing. Widely used in handbags, cosmetic bags, stationery fabrics or accessories, toys and gifts, etc.
"Mat black PVC film sheet roll PVC-MSH-015" parameter description Is it in stock: Yes Certification: ROHS, UL, REACH Material: Polyvinyl chloride PVC Processing method: Extrusion Type: Thermoplastic Model: PVC-MSH-015 Size: 0.15 Brand: Dan Mason Packing: Carton or stretch film Color: Double Sided Matte Black Yield: 100000000 "Mat black PVC film sheet roll PVC-MSH-015" detailed introduction Matte black PVC film sheet roll PVC membrane PVC (polyester fiber type) membrane material Classification According to the intensity level, it is divided into grades Explain that the fabric substrate of PVC film material should be polyester and polyamide fiber fabrics. The coating is mainly polyvinyl chloride (PVC) resin, and the weight of different coatings should be between 400 and 1500g/m2 according to functional requirements. PVDF), polypropylene resin (ACRYLIC), silicone resin, etc., and should have the function of improving the self-cleaning and anti-aging properties of PVC film materials. The thickness of the PVC film material should be greater than 0.5mm. The surface layer should have stable anti-corrosion and anti-ultraviolet erosion capabilities during the shelf life, and should have self-cleaning properties. Selection points 1) The surface layer of the PVC film material should have stable anti-corrosion and anti-ultraviolet erosion capabilities during the shelf life, and the surface should have self-cleaning properties. 2) After the PVC film material reaches the melting point in the fire environment, a melting hole will appear, and the boundary of the melting hole will burn and spread, but no open fire will be generated. According to my country's GB8624 "Classification Method of Combustion Performance of Building Materials", it is designated as B1 grade flame retardant material.
Printing grade frosted PC film Suitable for special printing, helmets, signs, nameplates, protective covers, etc. Anti-scratch PC film Uses: window lenses for electronic products such as mobile phones, MP3, MP4, DVD, and backlights
"PVC transparent film sheet PVC-TM-025" parameter description Is it in stock: Yes Certification: ROHS, REACH Material: PVC Processing method: Calendering method Type: Thermoplastic Model: PVC-TM-025 Specifications: 0.25mmx760mm Trademark: Dan Mason Packing: cardboard or carton Yield: 100000000 Detailed introduction of "PVC transparent film sheet PVC-TM-025" PVC film sheet The full name is Polyvinylchlorid, the main ingredient is polyvinyl chloride, and other ingredients are added to enhance its heat resistance, toughness, ductility, etc. PVC can be divided into soft PVC and hard PVC. Among them, hard PVC accounts for about 2/3 of the market, and soft PVC accounts for 1/3. Soft PVC is generally used for the surface of floors, ceilings and leather, but because soft PVC contains softeners (this is also the difference between soft PVC and hard PVC), it is easy to become brittle and difficult to store, so its scope of use is limited. Hard PVC does not contain softeners, so it has good flexibility, easy to form, not easy to be brittle, non-toxic and pollution-free, and has a long storage time, so it has great development and application value. The essence of PVC is a vacuum blister film, which is used for surface packaging of various panels, so it is also called decorative film and adhesive film, and is used in many industries such as building materials, packaging, and medicine. Among them, the building materials industry accounts for the largest proportion, at 60%, followed by the packaging industry, and several other industries with small-scale applications. PVC is a polyvinyl chloride plastic with bright color, corrosion resistance, firmness and durability. Due to the addition of some toxic auxiliary materials such as plasticizers and anti-aging agents in the manufacturing process, its products generally do not store food and medicine. The optimum molding temperature of PVC is 170â??-180â??, that is to say, the melt temperature is around 170â??-180â??. At this temperature, PVC becomes a viscous fluid state, and its physical properties reach the highest level. Thickness: 0.15MM-0.5MM Color: transparent Features: Cold resistance, low toxicity, etc. Uses: screen printing/pad printing/offset printing, high frequency voltage and sewing. Widely used in handbags, cosmetic bags, stationery fabrics or accessories, toys and gifts, etc.
PVC (polyester fiber) film material Classification According to the intensity level, it is divided into grades Explain that the fabric base material of PVC film material should be polyester and polyamide fiber fabric. The coating is mainly polyvinyl chloride (PVC) resin. According to the functional requirements, the weight of different coatings should be between 400 1500g/m2. The surface layer should be polyvinylidene fluoride resin (PVF) and polyvinylidene fluoride resin ( PVDF), polypropylene resin (ACRYLIC), silicone resin, etc., and should have the function of improving the self-cleaning and anti-aging properties of PVC film materials. The thickness of the PVC film material should be greater than 0.5mm. The surface layer should have stable anti-corrosion and anti-ultraviolet eroding ability during the warranty period, and should have self-cleaning performance. Selection points 1) The surface layer of the PVC film material should have stable anti-corrosion and anti-ultraviolet eroding ability during the warranty period, and the surface should have self-cleaning performance. 2) When the PVC film material reaches the melting point in a fire environment, a molten hole will appear, and the boundary of the molten hole will burn and spread, but no open flame will be produced. According to my country's GB8624 "Classification Method for Combustion Performance of Building Materials", it is designated as a Class B1 flame-retardant material. 3) The color, light reflection and transmittance of PVC film materials should meet the requirements of the following table. Film material type Film surface color Light reflectance (%) Film surface transmittance (%) PVC film material Milky white, translucent 75 85 613 Color 45 55 4 6 4) The main performance comparison of four different surface materials of PVC film materials is shown in the table below. Main performance: PVC film material on the surface of polypropylene resin, PVC film material on the surface of PVDF can be spliced PVC film material on the surface of PVDF not spliced, PVC film material on the surface of PVF-film Manufacturer warranty period 3-7 years 10 years 10 years 10 years Aging resistance low fair good good UV resistance low fair good good Corrosion resistance low fair good good Softness good good good good Foldability Foldable Foldable Foldable Unfoldable Self-cleaning performance low good very good very good Splicing method Direct splicing Polishing or pasting splicing strip splicing Polishing or pasting splicing strip splicing Material price low high high high
Transparent PC sheet, thickness 0.7, 0.8, 1.0, 1.2, 1.5, etc., width 915mmx1830mm It can be used for printing as a base plate, and can also be used as a window, etc. Complete specifications, welcome to inquire
We have ongoing supply of LDPE Film in rolls. Contact us for pictures and specification.
We have ongoing supply of transparent LDPE Film in bales 98-2 post industrial. Please contact us for more information .
There are mainly coarse sand, fine sand, double gloss, single gloss, single mirror sand, etc. can be used for leather bags, leather goods, insulating gaskets, electronic nameplates, electronic gaskets; cosmetics, food, clothing, stationery, hardware products And other high-end packaging, can also be used for silk screen printing, light boxes, picture albums, folder covers, album covers, etc.
Product Feature: HDPE Masking Tape Plastic Drop Sheet Roll Strip 1,Corona treatment . 2,Longitudinal easy to tear, and easy to use by hand. 3,Used a wide range of paint industries,include: Automotive, House, Construction, Shipbuilding and etc. 4,Using advanced folding way, product appearance small volume, convenient movement. 5,Can match dispenser, easy to use. Product Specification TBN1-1 300mm*33m TBN2-1 550mm*33m TBN3-1 1100mm*33m TBN4-1 1400mm*33m TBN5-1 1800mm*33m TBN6-1 2100mm*15m TBN7-1 2400mm*20m TBN8-1 2700mm*20m
Paint Adhesive Masking Protection easy-to-cut extremely smooth to cut tape-resistant tape can be repositioned The special structure of plastic film is composed of three layers, which increases the moisture absorption function and prevents the whitening caused by moisture watertight, tear resistant Electrostatic treatment- adapts tight to the surface, Reduce dust pollution perfect paint adhesion heat resistant up to 120 C The Packing Dispenser Box perfect protection against dust until use, less rework of finish Preserve electrostatic adsorption Convenient stacking and clean storage Products description Material HDPE Thickness 8-18mic Color transparent, white, blue and others overlapperd width 95cm Temperature resistance of film 120 C Statically charge Yes
