PET FLAKES
The Recycling PET (Polyethylene Terephthalate) Flake is obtained from post-consumption of Recycling PET Plastics Bottles recycling. Strong material with light weight. The flake is processed by blowing, injection, and extrusion.
SPECIFICATION:
GRADE AA
PVC CONTENT: 0.005% (50ppm)
OTHER IMPURITY: 0.01% (100ppm)
GLUE RESIDUE/GLUE: 0.02% (200ppm)
GRADE A:
PVC CONTENT:0.01% (100ppm)
OTHER IMPURITY: 0.02% (200ppm)
GLUE RESIDUE/GLUE:0.02% (200ppm)
COLOR: CLEAR / NATURAL
PURPOSE: For the raw material in many industries : Recycled PSF/Fiber, Strapping Band, Sheet, Bottle
The main raw material of PTA and MEG is added with modifiers of third monomer and fourth monomer, etc., then subjected to copolymerization reaction to make modified polyester pellet with melting point at 100'C - 225C.
Functional characteristics low melting point, good spinnability and excellent fiber adhesion effect
Application scope manufacturing bi-component core-sheath fiber and filament yarns, etc.
Specification - LOW MELTING PET CHIPS TRB FIBER GRADE 110-225.
Advantages: It is uniformly depressed anti-adhesive, with excellent film-forming properties; Polymerization of continuous device production makes the quality high and stable.
Application: It can be used in films with special requirements for optical and surface properties or ultra- films below 81/4m (micrometer ). It can be used directly in the food packing materials after FDA approval.
14098 Plastic Raw Materials Suppliers
Short on time? Let Plastic Raw Materials sellers contact you.
For the production of thin film and solar cell encapsulation substrates with high strength requirement
The solar polyester film can protect the solar panel.
PET FLAKES
The Recycling PET (Polyethylene Terephthalate) Flake is obtained from post-consumption of Recycling PET Plastics Bottles recycling. Strong material with light weight. The flake is processed by blowing, injection, and extrusion.
SPECIFICATION:
GRADE AA (B to B flakes)
PVC CONTENT: less 0.005% (50ppm)
OTHER IMPURITY: less 0.01% (100ppm)
GLUE RESIDUE/GLUE: less 0.02% (200ppm)
GRADE A: (Sheet or Filament Grade)
PVC CONTENT: less 0.01% (100ppm)
OTHER IMPURITY: less 0.02% (200ppm)
GLUE RESIDUE/GLUE: less 0.02% (200ppm)
COLOR: CLEAR / NATURAL
PURPOSE: For the raw material in many industries : Recycled PSF/Fiber, Strapping Band, Sheet, Bottle
What is PET Open Agent Film Chips?
PET Open Agent Film Chips are plastic chips made of polyethylene terephthalate (PET) that contain an open agent, which helps to improve the adhesion of inks and coatings to the surface of the film.
It is uniformly depressed anti-adhesive, with excellent film-forming properties; polymerization of continuous device production makes the quality high and stable.
As an opening agent to be used with film grade base materials to produce various types of films.
It can be used in films with special requirement for optical and surface properties or ultra-films below 8u.
Can be used directly in foodstuffs after FDA approval.
What is PET Open Agent Film Chips?
PET Open Agent Film Chips are plastic chips made of polyethylene terephthalate (PET) that contain an open agent, which helps to improve the adhesion of inks and coatings to the surface of the film.
It is uniformly depressed anti-adhesive, with excellent film-forming properties; polymerization of continuous device production makes the quality high and stable.
As an opening agent to be used with film grade base materials to produce various types of films.
It can be used in films with special requirement for optical and surface properties or ultra-films below 8u.
Can be used directly in foodstuffs after FDA approval.
This type Chips that is designed to resist burning and melting at low temperatures.
Low Melting Point Polyester Chip for Hot Melt Yarn Masterbatch
Extrusion Grade Polymer for Hot-melt Adhesive Glue Coating
Description:
Generally speaking, the low melting point polyester chip refers to one specialty polymer with a melting point between 90 and 220.
The melting point of polyester is the temperature at which a solid crystalline substance changes from a solid state to a liquid. So it reflects the purity of polyester. Generally speaking, pure polyester is a partially crystalline polymer with a melting point of 265. But during actual production, some impurities exist in the polyester due to various side reactions. At the same time, the defects of polymer crystals and the difference in crystallinity will also affect the melting point. The common type of low melt polymer is 110. But we can also offer a melting point of 90, 120, 160, and 180.
Application:
Low-melt polyester chips can produce low-melting point fiber, low-melting point synthetic fiber, and thermal-melting mucilage. Its primary usage is acting as bonding fiber in nonwoven fabrics. The end usage lies in clothing, articles for bed, shoe uppers, sleeping bags, sofas, and hygiene products.
LM PET Chip is also the main raw material of masterbatch carriers. That is, low-melt PET chips, conventional chips, and dyes are mixed to produce the polyester color masterbatch according to a certain proportion. The production of this product is the introduction of polyester macromolecules into the modified copolymer unit. And its melting point is in the range of 100-120. Commonly used modifiers are phthalic acid, adipic acid, and trimethylolpropane.
Recently, LM Polymer is also extruded into the back coating of nonwoven, automotive interiors, foam, injection molding, PET sheets, and hot-melt adhesive/glue.
Low Melt Yarn is also called hot melt yarn or fusible yarn. There are sheath-core low-melt bicomponent yarn and full low-melt polyester yarn.
What is pe/pp bicomponent fiber?
PE/PP bicomponent fiber is a type of synthetic fiber that is made up of two different polymers, polyethylene (PE) and polypropylene (PP), which are combined in a single filament.
What are the advantages of using PE/PP bicomponent fiber in textiles?
PE/PP bicomponent fiber offers several advantages in textiles, including improved strength, durability, and moisture management. It also provides a softer feel and can be used in a variety of applications, such as sportswear, outdoor apparel, and home textiles.
What are some common uses of PE/PP bicomponent fiber in the textile industry?
PE/PP bicomponent fibers have several advantages that make them popular in the textile industry. Some of these advantages include:
Improved Strength: PE/PP bicomponent fibers have a higher tensile strength than regular fibers, making them ideal for use in high-stress applications.
Enhanced Durability: These fibers are resistant to wear and tear, making them ideal for use in products that need to withstand daily use.
Improved Comfort: PE/PP bicomponent fibers have a soft texture, which makes them comfortable to wear against the skin.
Moisture Management: These fibers are hydrophobic, which means they repel water and moisture. This property makes them ideal for use in products that need to stay dry.
Some common uses of PE/PP bicomponent fiber in the textile industry include:
Clothing: These fibers are often used in the production of sportswear, outdoor clothing, and other products that require enhanced durability and moisture management.
Home Textiles: PE/PP bicomponent fibers are used in the production of carpets, curtains, and other home textiles that require enhanced strength and durability.
Nonwoven Fabrics: These fibers are used in the production of nonwoven fabrics, which are used in a wide range of applications, including medical products, hygiene products, and filtration materials.
Overall, PE/PP bicomponent fibers offer several advantages that make them a popular choice in the textile industry for a wide range of applications.
We can supply, as much as you want, top quality and clean PET Flakes mix color, hot washed, no caps, no labels, no residue, made in USA.
Price:
US$540.00 per metric ton FAS Port of Long Beach CA for minimum 4 X 40ft containers.
US$585.00 per metric ton FAS Port of Long Beach CA for less than 4 X 40ft containers.
We can supply, as much as you want, top quality and clean PET Flakes mix color (80% green, 20% mix color), hot washed, no caps, no labels, no residue, made in USA.
Price:
US$540.00 per metric ton FAS Port of Long Beach CA for minimum 4 X 40ft containers.
LDPE Mix Color Chunk/Purge and Regrind.
1x40ft HC container = 18 metric tons (Minimum) - Average 2 containers monthly available for shipment.
Melt flow = 0.602.
It's a hard scrap from a film line (Post-Industrial).
Pricing:
- US$325.00 per metric ton (Regrind) FAS Houston Port, TX (USA)
- US$225.00 per metric ton (Chunk/Purge) FAS Houston Port, TX (USA)
PET clear thermoformed tray regrind, upto 3% EVOH
All Clean / Post Industrial
2 x 40ft containers readily available and ongoing monthly.
Approx 16 metric tons per 40ft container.
Price: US$217.00 per metric ton ex-warehouse USA.
PE/PP mix color floor sweep (natural & blue color) = 6.8 tons
PE mix color floor sweep with fillers, color concentrates, etc (Dark & Light colors) = 13.6 tons
Minimum quantity: 1 x 40ft HC container (18 tons) - available for shipment in 10 days.
Price: US$198.00 / MT Ex-warehouse Houston, TX, USA.
Low density polyethylene (LDPE), also known as high pressure polyethylene, is a kind of plastic material, it is suitable for thermoplastic molding processing of various forming processes, forming processing is good. LDPE is mainly used for thin film products, but also for injection products, medical devices, medicine and food packaging materials, blow molding hollow molding products and so on.
Item
Property Unit
Typical Value
Mass density g/cm 3 0.941-0.959
Melt flow Rate(190 centidegree /2.16kg) g/10min 1.0
Tensile yield strength MPa 19.0
Flexural modulus Mpa 965
Elongation@ break % 400
Impact Embrittlement temperature centidegree MAX -118
Dielectric Constant 100KHZ 2.32
1MHZ 2.31
Loss Tangent 100KHZ MAX 0.0001
1MHZ MAX 0.0001
Volume resistivity OHM-CM MIN 1x10 15
Application
Mainly used for the production of high toughness of the telephone,cable insulation material
LDPE:
Physical Properties Test Method Nominal Value Unit
Density ISO 1183 0.921 g/cm3
Melt Mass-Flow Rate (MFR) ISO 1133 1.9 g/10min
Hardness
Shore Hardness (shore D) ISO 868 45
Mechanical Properties
Tensile Modulus ISO 527-2 175 MPa
Tensile Strength Yield, ISO 527-2 9.0 MPa
Break, 13.0 MPa
Tensile Strain(Break) ISO 527-2 850 %
Modulus of Elasticity Internal Method 250 MPa
Thermal
Vicat Softening Temperature ISO 306/A50 89.0 �°C
Melting Temperature (DSC) DIN 53765 108 �°C
Peak Crystallization Temperature (DSC) DIN 53765 97.0 �°C
Heat of Fusion DIN 53765 110 J/g
Electrical
Volume Resistivity ASTM D257 8.5E+15 ohm â?¢cm
Dielectric Strength ASTM D149 30.0 kV/mm
Dielectric Constant (60Hz) ASTM D150 2.20 %
Dissipation Factor (60 Hz) ASTM D150 0.00050
LLDPE
Properties Test conditon Test method Test data Unit
Density 0.91
MFI 2
Drop impact strength ASTM D-1709 90 g
Elongation ,vertical/horizontal ASTM D-882 600/800 %
tensilestrength,thermal resistance ASTM D-1004 105/95 Kg/cm
elongation ASTM D-638 930 %
tensile strength ASTM D-638 180
tensile strength,vertical/horizontal ASTM D-882 380/350
Vicat softening point ASTM D-1525 103 C
melting point ASTM D-2117 126 C
Turbidity ASTM D-1009 12 %
45 glossness ASTM D-2457 75 %
14098 Plastic Raw Materials Suppliers
Short on time? Let Plastic Raw Materials sellers contact you.
