The machine is for turning raw material of PP,PS,PE to plastic sheet. It works combining with thermoforming machine to produce plastic plate,cup,etc. Screw diameter: 110mm Screw L/D ratio(L): 33:1 Cylinder material: 38CRMDALA Cylinder heating type: Aluminum cast heater, total 6zones Cylinder cooler type: Cooling with air blower each zone(high precision of temperature control) Speed down cabinet: ZLYJ-250-16:1 coupling drive Screen Changer type: Hydraulic screen changer, non-stop machine Motor power of hydraulic pressure: 2.2 kw Width of die head, PP,PS,PE: 800mm Sheet width: 670mm Sheet thickness: 0.3-2.0mm Die head heating power: 11 kw Die head heating type: Built-in heating stick Die head heating control: 6 zones controlled saperately Main power: 55 kw-6 grade( 380W, 60HZ) Type of main machine speed adjustment: Frequency converter speed adjustment Frequency converter: 55KW Outline dimension: (LxWxH)12mx1.6mx2.3m For any interest, pls contact us. We provide machine working video and glad to serve on you.
The machine is for shaping plastic sheets to plastic products. 1. It adopts frequency speed control motor to send plastic sheet, improving the accuracy of feeding operation. 2. Double hydraulic oil pump make the equipment run more high-speed, stable and reliable. 3. Four guide posts run the operation of the table using, ensuring the accuracy and working life of molds. 4. Air cushion buffer opening and closing of modes to reduce noise. Technical Parameters Suitable material: PP/PS/PET Sheet Width: 400-630mm Thickness of Sheet: 0.3-2mm Max. Formed Area: 640Ã?280mm Max. Formed Height: 160mm(-180mm need customized) Air Pressure: 0.8Mpa Water Consumption(15-20degrees centigrade): 150L/min Air Consumption: 2000L/min Work Efficiency: 15-35pcs/min Power Source: 380V,50Hz(3phase,5wires) Heating Power: 65-78kw Oil Pump Motor: 11kw Sheet Feeding Motor: 2.9kw Rewinding Diameter: 600mm Dimension: 3500Ã?1800Ã?2500mm Machine Weight: 4500-5500kg For any interest, pls contact us. We provide machine working video and glad to serve on you.
Apolo c200 can compact large size and lightweight ps materials. The compacted ps is easy to handle and convenient to recycle or buy or sell. Applicable materials include styropor, styrofoam and food trays and cups. The machine can smash the waste eps and compress the waste eps into tight block. Eps, after compaction, can be sold for recycling and reusing them to make frame products and construction moldings, such as crown molding, wall panel.
Greenmax apolo series specialize in compressing all kinds of eps material. The machine smash the waste eps and compress the waste eps into tight block. Eps, after compaction, can be sold for recycling and reusing them to make frame products and construction moldings, such as crown molding, wall panel.
The gm zeus series was recently developed in 2012 and upgraded from apolo, aiming to process a wider range of foam type materials, such as eps, epp and epe. Advantages of apolo are combined to zeus so that some materials that can have a better compact effects. Zeus have the function that can prevent some compacted materials from scattering again. A good helper for polystyrene recycling. For plastic foam recycling, zeus series use a surface melting technology makes an external skin are the block, so it could compact all kinds of plastic foam like epe / expandable polyethylene, epp / expanded polypropylene, also all kind of plastic foam.
Compacts all kinds of scattered eps and bulk eps into a compact size. The compact size of epp is easy to transport and store in a warehouse. So apolo c300 system offers a convenience to you. Applicable materials include eps, xps and psp, like food trays and cups
Zeus c100 can prevent the compacted eps, pe foam and other material from scattering. C100 can also prevent the compacted material loosening again. C100 can offer convenience for recyclers. Applicable materials include epe(pe foam), epp, eps, xps and psp. Food trays and cups is also included.
Zeus c200 can prevent the compacted eps, pe foam and other material from scattering. C200 could also prevent the compacted material loosening again. C200 offers convenience for recyclers. Applicable materials include epe(pe foam), epp, eps, xps and psp. Food trays and cups is also included.
With the help of poseidon, all you need to do is pulse-on the machine and then throw the pet bottles into the feed bins. Poseidon can do all the rest tasks automatically. The liquids are squeezed out while the bottles are compacted. After process, 85%-95% of the liquids are extracted from the bottles and they are collected into a tank. Before draining out, they would be treated first in order to avoid water pollution. As for the compacting effect, the bottles volume ratio before and after compacting is around 6:1
Greenmax apolo series specialize in compressing all kinds of eps material. The machine smash the waste eps and compress the waste eps into tight block. Eps, after compaction, can be sold for recycling and reusing them to make frame products and construction moldings, such as crown molding, wall panel, etc.
Refractory plastic, also known as plastic, including high-performance wear-resistant refractory plastic, is a mud-like high-grade unshaped refractory, to ramming, vibration or extrusion methods such as construction. With excellent wear resistance, superior adhesion and high operating temperature (not less than 1600 , ), the construction process is simple, short duration, after the completion of the construction without oven and other advantages. Gongyi taurus refractory material factory is a professional refractory materials manufacturers and refractory materials suppliers, mainly supply refractory bricks, unshaped refractories, silicon carbide refractory castable, castable refractory cement, pouring material, castable refractory concrete, silica ramming mass etc. Series of refractory materials products, sincerely welcome everyone to visit.
Focus on polystyrene compacting, apolo series is the most popular machine of greenmax. With 5 years' accumulative innovation, current apolo can process most ps foams including eps, xps and psp. Greenmax apolo series can reduce the volume of styrofoam waste up to 50:1. So the scattered and big size material can be compressed into tight block. Then the lightweight and scattered eps will be easily transported. Greenmax use a more powerful crusher for eps. Compared to the crusher of eps, the crusher of eps has double motor and more sharped blade. But the apolo machines can also handle styrofoam recycling effectively.
The gm zeus series was recently developed in 2012 and upgraded from apolo, aiming to process a wider range of foam type materials, such as eps, epp and epe. Advantages of apolo are combined to zeus so that some materials that can have a better compact effects. Zeus have the function that can prevent some compacted materials from scattering again. Its a good helper for polystyrene recycling. For plastic foam recycling, zeus series use a surface melting technology makes an external skin are the block, so it could compact all kinds of plastic foam like epe / expandable polyethylene, epp / expanded polypropylene.
Features: 1.Gloss & clarity 2.Freshness 3.Anti-fog 4.Cold resistance 5.Wrapping applicability More Product Details Material - PVC Type - Cling film Usage - Food Wrapping & Preservation Hardness - Soft Processing Type - Casting Transparency - High T ansparent Width - 250mm-600mm Length - 300m-3000 Meters Thickness - 10~20 Micron Place of Origin - Taiwan Temperature resistance - -60&120&186 Packaging - 6, 2 , 1 roll/ctn OEM Printing on core and cartons - Available 6 rolls / 2 rolls / 1 rolls per carton depends on the roll size
Ptfe fine powder We have 50ton store to deal with. If any request, pleased to know it. Tell me your application and powder request. Then we will send you price and other terms.
EPE Foam Pipe/Rod/Profile Production Line from Jiecheng company, mainly make products for electrical Insulation, thermal insulation, bed mat- tress, sofa terrier edge,Car upholstery, sofa backrest and top-brand clothing stereotypes, filling and decoration, it is the ideal material to replace the rubber foam products. The machine model can be design according to customers demand Youtube: Cathy Li JC-foam
PE/PP Geonet/Civil Net Machine is used to making the plastic geo net, plastic civil net in all kinds of application, such as reinforce the subgrade, put in river bank to prevent soil erosion, keep animals, fence, decoration and so on.
Product name : polyester chips Specifications : Grade : films Feature : moisture proof Microns : 0.64 Any other details, contact us without any hesitate. Ernest at tengtuo-exp dot com
Product description: After the high tech anti infrared special process, the plate evenly distributed on both sides of the high concentration of co extruded uv anti uv coating, all-round blocking ultraviolet. Because both sides of the anti uv function, this not only brings the design flexibility, but also in the cutting and installation of materials show an important advantage. Both sides can be installed outwards, thereby reducing the installation error to a minimum. And both sides of the use of uv technology, which has a better outdoor anti-aging performance
Product description: Pc lens surface of the special optical lens design, so that the light refraction repeatedly, without affecting the transparency of the plate, the astigmatism effect is good results. Beautiful rhombohedral pattern, decorative strong, and combined with the led light source to achieve color Main application: Advertising light box Led lampshade Outdoor billboard Ceiling lighting, ceiling Partition, screen
