Injection molding is to mold molten plastic into a closed mold with a lower temperature through a nozzle under high pressure. Both thermoplastics and thermosetting plastics can be injection molded. In the production of packaging containers, it can mainly produce various box-type packaging containers, such as various turnover boxes and small boxes. For box-type packaging containers, the following aspects should be considered in structural design. Wall thickness of container The design of wall thickness mainly considers three aspects: one is thickness; the other is uniformity; the third is smooth transition. Thickness: The wall thickness of the container is mainly determined by its use, type of plastic, structure, etc. For thermoplastics, it should not be less than 0.6mm, usually 2 ~ 4mm. For thermosetting plastics, because of its poor fluidity, the thickness should be larger, 1.6 ~ 2.5ram for small parts and 3.2 for large parts 8mm, the maximum does not exceed 10mm. Uniformity: The uniformity of the wall thickness has a great influence on the quality of the container. If the thickness difference of a container is too large, it will cause uneven shrinkage and cause defects such as deformation and cracks. Therefore, the structure should be designed with equal thickness as much as possible. Gently transition: In some containers, some parts must have different thicknesses due to structural requirements, such as the corners of the container. At this time, a gentle transition should be used to avoid sudden cross-sections. 2. Increase stiffness Plastic is relatively flexible, and the rigidity of the container made is poor, and the turnover box container sometimes has a large load capacity. Therefore, various structural measures should be taken to improve the rigidity.
Various Sizes Plastic Paint Pail Injection Mold Product description Mould Name: Various Sizes Plastic Paint Pail Injection Mold Mold material : 45 #, 2738, 2316, 718, 718H, P20, P20H, NAK80, 2344 Mold base: LKM, HASCO Cavities :Multiple / Single Runner: Hot runner / cold runner Processing technology: EDM CNC grinding machine Lathe Drilling hole Polishing Wire cutting logo :According to customer needs Design software: CAD UG PRO-E Drawings:according to customer requirements Hardness;35-55HRC Mold life:100,000-1,000,000 times Delivery time:15-45 days What should be paid attention to in the development of plastic bucket molds? How to solve the eccentricity problem of the plastic barrel mold is the first thing. In this way, the barrel cannot be produced for a long time, and there is no way to repair it in the later stage. The second problem is the cycle of mold production cycle. Generally, the cycle of 20L barrels in the market is about 40s. If you want to increase the benefits, reduce the cycle time, save labor costs, electricity costs, and time costs. Conventional customers usually choose steel P20 or 718H. High-end customers will choose 2738, S136 plus beryllium copper. If customers use regrind production, we recommend to do electroplating, which can save the time without frequent lighting.
Plastic animal house molds Product Features Name China customized plastic pet nest for cat Shaping mode Rotomolding mould Model material LLDPE Mould production cycles 15-60 days Mould life 3-6 years Surface treatment Customized Color Customized color
Helmet Injection Mold Basic Imformation NAME (Mould Type) OEM Plastic Injection Mould Material of Steel 738ï¼?718ï¼?NAK80ï¼?S136,P20 etc... Plastic Material ABS, PP, PC, PVC, POM, PA66 etc... Runner Cold/Hot Runner Gate Type Pin point gate, Edge gate, Sub gate, Side gate,etc. Mould Life 500000-1000000 shoots Design Software UG, Pro-E, Solid Works, Auto CAD etc.... 1, Mould base is use of LKM frame, and HASCO standard frame, all components are with DME or HASCO standard. 2, We have a wide useage of mold steel, both local and improted, 45#, 50#, P20, H13, 718&738H, 2738,2344, S136, from ASSAB, DAIDO, THYSSEN, FINKL,etc. heat treatment to HRD 48~52 HRC, nitried all sliders and inserts, use Berylium Copper in corners to improve cooling. 3, We supply full set of 3D mold drawing and details layout. 4, We make all kinds of mold, big size up to 15 Tons, smaller size up to 0.5mm on plastics; We make cold runner mold, hot runner mold(Husky,Mold maser,Synventive,DME and YUDO), 3-plate mold, over mold, insert mold, reverse ejection mold, gas asistance mold, etc. Our engineer and technican are always keep studying and get more and more experienced and professional on mold making skills. 5, We have a wide usage on plastic material, especially for those may cause worse deformation, bad filling, worse part surface, we have our ways to control the mold to have better parts. 6, We ensure the mold life to customers, we provide steel and material conformity, certicate to customers. 7, Our advanced equipment and high effective mangement give customer quick lead time, sometimes we only take 10 days to complete prototype molds.
Plastic Car Door Handle Injection Mould Product Description Injection moulding is a manufacturing process for producing parts by injecting material into a mould. Injection moulding can be performed with a host of materials, including metals, (for which the process is called diecasting), glasses, elastomers, confections, and most commonly thermoplastic and thermosetting polymers. Our Services 1. OEM Manufacturing welcome: Product, Package... 2. Sample order 3. We will reply you for your inquiry in 24 hours. 4. after sending, we will track the products for you once every two days, until you get the products. When you got the goods, test them, and give me a feedback.If you have any questions about the problem, contact with us, we will offer the solve way for you.
Auto parts car front bumper mold plastic injection mold A car bumper is a safety device that absorbs and mitigates external impact and protects the front and rear of the vehicle body. Generally consists of plastic bumpers, cushioning materials and beams. Plastic bumpers have strength, rigidity, and decorativeness. From a safety point of view, a car can play a cushioning role in the event of a collision and protect the front and rear body. From the appearance, it can be naturally combined with the car body to form a natural One body, with good decoration, has become an important part to decorate the appearance of the car. 1: Determination of bumper shell material Regulatory requirements: The front and rear protection devices of the car must ensure that the vehicle will not cause serious damage to the vehicle when a light collision of 4km / h occurs. In addition, the front and rear bumpers not only protect the vehicle and reduce vehicle damage, but also protect pedestrians and reduce the injuries to pedestrians in the event of a collision. Therefore, the shell material of the bumper should have the following characteristics: 1) With less surface hardness, it can reduce pedestrian injuries; 2) Good elasticity and strong resistance to plastic deformation; 3) Good vibration damping effect, can absorb more energy in the elastic range; 4) Resistant to humidity and dirt; 5) Has good acid and alkali resistance and thermal stability. Modern car bumper shells are mostly made of plastic or fiberglass. In order to reduce the cost of trial production, save mold production costs, and also shorten the trial production cycle, in the concept car trial production, consider using FRP glass fiber reinforced epoxy hand lay-up process. The materials of the bumper are generally PP + EPEM + T20 or PP + EPDM + T15. EPDM + EPP is also more versatile. ABS uses less and is more expensive than PP. The thickness of the bumper is usually 2.5-3.5mm, and the gas-assisted molding can be made thinner. Note that if the bottom mesh of the bumper is integrated with the bumper, the thickness of the mesh must be more than 2.0mm, and the die angle should be increased as much as possible (2 degrees or more). If the mesh is separate, the mesh wall of 1-1.5mm is sufficient.
Plastic injectin large plant pot mould Mould Name: Plastic Flower Pot Mould Mold category: injection mold Core/cavity steel material: 718. Mold material can be customized according to customers. Polishing requirements: mirror polishing of the product, or surface treatment such as skin texture, sandblasting, etc. according to customer requirements. Pouring method: single point hot runner Plastic material: PP Mold cavity number: one out one Demoulding method: ejector pin. Mold life: 500,000 times After the plastic raw materials pe or pe are mixed, they are heated and melted by an injection molding machine and injected into the plastic flowerpot mold under high pressure, cooled and molded, and taken out by a robot to become a semi-finished product. Some can be sold directly, and some require printing . There are many shapes of plastic flower pots, which can be divided into round, square, and oval. Plastic flowerpots can be watered many times, and it has better drainage. Many people now choose plastic flower pots for planting potted plants. There are many plastic flower pots that are multi-functional. If you are interested in our products and services, welcome to contact us. We can provide you with more information about mould and the whole production line service.
Plastic flip top cap mould The existing plastic flip cover with an anti-opening protection structure is generally made of polypropylene to ensure the folding performance of the flip hinge. Limited to polypropylene, it has good toughness and can withstand a certain degree of deformation without being damaged. Therefore, most polypropylene anti-opening protection devices can withstand a certain deformation, and the anti-opening protection function is weak, and some consumers can Open the cover when the anti-opening protection structure is destroyed. 1. There is an annular leak-proof ring on the inner wall of the top of the bottle cap; 2. The lower end of the bottle cap is connected to an anti-theft ring through a tensile rib; 3. At the same time, there are a number of sheet-shaped gyroscopic tension wings evenly distributed on the inner wall of the anti-theft ring The bottle cap designed in this way has the characteristics of strong sealing, good leakage resistance and anti-theft performance, safe and convenient use, can effectively prevent the liquid in the bottle from being contaminated by bacteria, and can ensure that various beverage packages meet the national health standards. filp top cap Product Name Plastic flip top cap mould Cavity&Core Stee P20H,718H,2738H,S136,H13 etc. Product Material PP,HDPE,LDPE etc. Mould Base LKM,ISM,HASCO,DME Cavity Single/Multi-cavity Mould life 500,000 ~1million shots runner type cold/hot runner Delivery time 30~60day
Plastic thin wall food container packaging box mould Mould Base LKM Standard, HASCO Standard , etc. Mould Material P20/718/738/NAK80/S136/2738/2316/H13, etc. Moud Precision +/-0.01mm Mould Life 50-500K shots Mould Cavity Single cavity, multi-cavity Runner System Hot runner and cold runner GateType Pinpoint Gate, Edge Gate, Sub Gate, Valve Gate, etc. Equipment CNC,EDM,Cutting off Machine,plastic machinery,etc Plastic Material PA6,PA66, ASA, POM, PPS, ABS,ABS+GF,ABS+PC,POM(Derlin),PP, etc Surface Treatment Polishing,Painting,Chroming,Anodizing, Quanlity System ISO 9001: 2019 Plastic packaging container refers to a container made of plastic raw materials for packaging articles. With the rapid development of petrochemical industry and the rapid development of the plastic industry, plastic packaging containers have replaced packaging containers made of metal, glass, ceramics, wood and other materials in many aspects, showing strong vitality. â? According to the nature of the raw materials used, there are mainly polyethylene, polypropylene, polystyrene, polyvinyl chloride, polyester, polycarbonate and other containers. According to the classification of container molding methods, there are mainly blow molding, extrusion molding, injection molding, stretch molding, rotational molding, vacuum molding and other containers. Classified according to shape and purpose, there are mainly plastic boxes, plastic barrels, plastic bottles, plastic bags, plastic hoses, etc. We will meet your needs in tooling builds and injection molding, rapid scale up ramps for initial market launch, and full-scale manufacturing. Our focus is on innovative products and specialized in shortening the time between development time and manufacturing for our customer.
Plastic bobbin coil mold Product Plastic Wire Coil Mould/Spool Bobbins Mold Mould Base LKM,HASCO,DME Cavity/core material 2738,2343,S130,2344,718,8407,S136,P20,KD-61,NAK80... Cavity QTY Single-cavity Runner cold/hot runner Gate Submarine gate,side/edge gate Mould lifetime 1,000,000 shots Plastic material PP,PE, .etc Lead time 25-40days based on different products Package Wooden cases Port Ningbo/Shanghai Design software UG/CAD/PROE 1.Specialized in manufacturing plastic injection mould and Plastic Wire Coil Mould 2.Good quality Plastic Wire Coil Mould 3.Competitive price 4.Creative Design 5.High precision Plastic Mould 6. Good after-sale service 7. Punctual delivery time
Plastic Baby Chair Injection Mould Product Description 1.Make automatic ejection. Customized designs are accepted. 2.Mould steel: P20 German or Customized 3.Steel hardness: HRC 28 to 33 4.Injection system: hot runner 5.Ejector system: ejector pin 6.Cycle time:30 shots 7.Mould lifespan:1.000.000 times ratten chair ratten chari plastic mould Our Services Good steel with high hardness Good polish with high brightness Good machining with high precision
Name Fico Open Hot Runner FS2097- Rubik's Cube Top Cover Material PC(Shrinkage:0.5%) Product Size 73*47*61 Cavities Material 8402 Cold Runner/Hot Runner Open Hot Runner Turns Into Latent Glue Mould size 750*450*546 Mould Weight 1200 Type Of Injection Moulding Machine HaiTian MA2800/1350 Production Status Already In Production Mould Completion Time 45Days
blow bar, wear parts, impact crusher
Blow bar is one of crucial wear parts on impact crusher. The good blow bars and right material options are so important to keep the crusher running safely and cost efficiently. only manufacture and supply versatile options for blow bars of many brands, also assist customers choosing the right option for right applications based on its long term experience in this industry.
vertical injection method is aimed at the characteristics of light weight, high injection pressure, mold size, and injection molding of various color materials.
Injection pressing machine is suitable for molding epoxy resin products. It used for motor and other industries.
sealing strip vertical injection molding machine without a guidepost, high pressure, and high-speed injection, more suitable for unique molding.
Injection blowing machine is suitable for molding hollow plastic products under 215 cm3, and involves many industries such as lighting, medicine, chemical industry, food, toys, daily necessities, tools and so on. And it has been widely used.
the umbrella manufacturing process for many years research, development of rib machine based on the forefront of the industry.
BMC injection molding machine is mainly used for injection molding processing of thermosetting material BMC.
