Product Name:POF shrink film wrap
Thickness:From 8mic-38mic / customized
Width:From 150-3000mm/customized
Material:100% virgin polyolefin material
Transparency:High Clear and High Transparent
Colors:From 1 to 8 colors/ customized
Other customized service:Size; Colors;LOGO; Packing;OEM etc.
Modes of packing:Packed in standard cartons
Finishing Time:
<1000KGS, 3-5 days;
<23000KGS, 10-15 days;
20''/40'' FCL within 4 weeks
Application:
1. Food Packing like vegetables, fruit and sweety food;
2. Product Packing like electronic products, daily life products, medical products, etc.
Product Name:POF shrink film wrap
Thickness:From 8mic-38mic / customized
Width:From 150-3000mm/customized
Material:100% virgin polyolefin material
Transparency:High Clear and High Transparent
Colors:From 1 to 8 colors/ customized
Other customized service:Size; Colors;LOGO; Packing;OEM etc.
Modes of packing:Packed in standard cartons
Finishing Time:
<1000KGS, 3-5 days;
<23000KGS, 10-15 days;
20''/40'' FCL within 4 weeks
Application:
1. Food Packing like vegetables, fruit and sweety food;
2. Product Packing like electronic products, daily life products, medical products, etc.
Product Name:POF shrink film wrap
Thickness:From 8mic-38mic / customized
Width:From 150-3000mm/customized
Material:100% virgin polyolefin material
Transparency:High Clear and High Transparent
Colors:From 1 to 8 colors/ customized
Other customized service:Size; Colors;LOGO; Packing;OEM etc.
Modes of packing:Packed in standard cartons
Finishing Time:
<1000KGS, 3-5 days;
<23000KGS, 10-15 days;
20''/40'' FCL within 4 weeks
Application:
1. Food Packing like vegetables, fruit and sweety food;
2. Product Packing like electronic products, daily life products, medical products, etc.
Product Name:POF shrink film wrap
Thickness:From 8mic-38mic / customized
Width:From 150-3000mm/customized
Material:100% virgin polyolefin material
Transparency:High Clear and High Transparent
Colors:From 1 to 8 colors/ customized
Other customized service:Size; Colors;LOGO; Packing;OEM etc.
Modes of packing:Packed in standard cartons
Finishing Time:
<1000KGS, 3-5 days;
<23000KGS, 10-15 days;
20''/40'' FCL within 4 weeks
Application:
1. Food Packing like vegetables, fruit and sweety food;
2. Product Packing like electronic products, daily life products, medical products, etc.
51776 Plastic Products Suppliers
Short on time? Let Plastic Products sellers contact you.
Product Name:POF shrink film wrap
Thickness:From 8mic-38mic / customized
Width:From 150-3000mm/customized
Material:100% virgin polyolefin material
Transparency:High Clear and High Transparent
Colors:From 1 to 8 colors/ customized
Other customized service:Size; Colors;LOGO; Packing;OEM etc.
Modes of packing:Packed in standard cartons
Finishing Time:
<1000KGS, 3-5 days;
<23000KGS, 10-15 days;
20''/40'' FCL within 4 weeks
Application:
1. Food Packing like vegetables, fruit and sweety food;
2. Product Packing like electronic products, daily life products, medical products, etc.
Product Name:POF shrink film wrap
Thickness:From 8mic-38mic / customized
Width:From 150-3000mm/customized
Material:100% virgin polyolefin material
Transparency:High Clear and High Transparent
Colors:From 1 to 8 colors/ customized
Other customized service:Size; Colors;LOGO; Packing;OEM etc.
Modes of packing:Packed in standard cartons
Finishing Time:
<1000KGS, 3-5 days;
<23000KGS, 10-15 days;
20''/40'' FCL within 4 weeks
Application:
1. Food Packing like vegetables, fruit and sweety food;
2. Product Packing like electronic products, daily life products, medical products, etc.
We can supply, as much as you want, top quality and clean PET Flakes mix color, hot washed, no caps, no labels, no residue, made in USA.
Price:
US$540.00 per metric ton FAS Port of Long Beach CA for minimum 4 X 40ft containers.
US$585.00 per metric ton FAS Port of Long Beach CA for less than 4 X 40ft containers.
We can supply, as much as you want, top quality and clean PET Flakes mix color (80% green, 20% mix color), hot washed, no caps, no labels, no residue, made in USA.
Price:
US$540.00 per metric ton FAS Port of Long Beach CA for minimum 4 X 40ft containers.
LDPE Mix Color Chunk/Purge and Regrind.
1x40ft HC container = 18 metric tons (Minimum) - Average 2 containers monthly available for shipment.
Melt flow = 0.602.
It's a hard scrap from a film line (Post-Industrial).
Pricing:
- US$325.00 per metric ton (Regrind) FAS Houston Port, TX (USA)
- US$225.00 per metric ton (Chunk/Purge) FAS Houston Port, TX (USA)
PET clear thermoformed tray regrind, upto 3% EVOH
All Clean / Post Industrial
2 x 40ft containers readily available and ongoing monthly.
Approx 16 metric tons per 40ft container.
Price: US$217.00 per metric ton ex-warehouse USA.
PE/PP mix color floor sweep (natural & blue color) = 6.8 tons
PE mix color floor sweep with fillers, color concentrates, etc (Dark & Light colors) = 13.6 tons
Minimum quantity: 1 x 40ft HC container (18 tons) - available for shipment in 10 days.
Price: US$198.00 / MT Ex-warehouse Houston, TX, USA.
Low density polyethylene (LDPE), also known as high pressure polyethylene, is a kind of plastic material, it is suitable for thermoplastic molding processing of various forming processes, forming processing is good. LDPE is mainly used for thin film products, but also for injection products, medical devices, medicine and food packaging materials, blow molding hollow molding products and so on.
Item
Property Unit
Typical Value
Mass density g/cm 3 0.941-0.959
Melt flow Rate(190 centidegree /2.16kg) g/10min 1.0
Tensile yield strength MPa 19.0
Flexural modulus Mpa 965
Elongation@ break % 400
Impact Embrittlement temperature centidegree MAX -118
Dielectric Constant 100KHZ 2.32
1MHZ 2.31
Loss Tangent 100KHZ MAX 0.0001
1MHZ MAX 0.0001
Volume resistivity OHM-CM MIN 1x10 15
Application
Mainly used for the production of high toughness of the telephone,cable insulation material
LDPE:
Physical Properties Test Method Nominal Value Unit
Density ISO 1183 0.921 g/cm3
Melt Mass-Flow Rate (MFR) ISO 1133 1.9 g/10min
Hardness
Shore Hardness (shore D) ISO 868 45
Mechanical Properties
Tensile Modulus ISO 527-2 175 MPa
Tensile Strength Yield, ISO 527-2 9.0 MPa
Break, 13.0 MPa
Tensile Strain(Break) ISO 527-2 850 %
Modulus of Elasticity Internal Method 250 MPa
Thermal
Vicat Softening Temperature ISO 306/A50 89.0 �°C
Melting Temperature (DSC) DIN 53765 108 �°C
Peak Crystallization Temperature (DSC) DIN 53765 97.0 �°C
Heat of Fusion DIN 53765 110 J/g
Electrical
Volume Resistivity ASTM D257 8.5E+15 ohm â?¢cm
Dielectric Strength ASTM D149 30.0 kV/mm
Dielectric Constant (60Hz) ASTM D150 2.20 %
Dissipation Factor (60 Hz) ASTM D150 0.00050
LLDPE
Properties Test conditon Test method Test data Unit
Density 0.91
MFI 2
Drop impact strength ASTM D-1709 90 g
Elongation ,vertical/horizontal ASTM D-882 600/800 %
tensilestrength,thermal resistance ASTM D-1004 105/95 Kg/cm
elongation ASTM D-638 930 %
tensile strength ASTM D-638 180
tensile strength,vertical/horizontal ASTM D-882 380/350
Vicat softening point ASTM D-1525 103 C
melting point ASTM D-2117 126 C
Turbidity ASTM D-1009 12 %
45 glossness ASTM D-2457 75 %
We produced different qualities in terms of Pet flake size and colors however the product standards are ensured as per international parameters of end use of the Pet Bottle Flakes.
Currently we are enganged in recyling Pet bottles to make Pet flakes. We have collection center in different locations of Bangladesh for collecting PET bottles. After collection, all the bottles are sorted and the lables are removed in our own factory. It is then crushed and washed properly by a team of highly skilled trained professionals to obtain the best quality .It is then tested in our own advanced laboratory for further inspection of quality of the product.After the quality is confirmed it is then packed in plastic bags of 25kg/ 50kg.
Product List:
- Pet Flakes Clear
- Pet Flakes Green
- Pet Flakes Brown
PE Granules
High density polyethylene (HDPE) for non-toxic, tasteless, no smelly white particles, melting point is about 130 �° C, relative density of 0.941 ~ 0.960. It has good heat resistance and cold resistance, chemical stability, but also has high rigidity and toughness, good mechanical strength. Dielectric properties, environmental stress cracking resistance sex also is good.
Low DENSITY POLYETHYLENE (LDPE), commonly known as high-pressure POLYETHYLENE, is mainly used in plastic bags and agricultural film due to its LOW DENSITY and the softest material.
Linear Low Density Polyethylene (LLDPE) is a copolymer of ethylene and a small amount of advanced olefin in the presence of catalyst.LLDPE is similar to LDPE in appearance, with poor transparency and good surface gloss. LLDPE has the advantages of low temperature toughness, high modulus, bending resistance and stress cracking resistance, and good impact strength at low temperature.
We have a wide range of grade PE materials with different physical properties. If the table does not meet your requirements, please feel free to consult us we will try our best to meet all your requirements for plastic granules.
Color: Transparent, green , blue, yellow , red ,white etc.
Size:1.22*2.44m 1.5*3m 1*2m etc.
Thickness: 1-200mm or as your request
Packing: based on your requirement
MOQ:1-2 ton
Payment:T/T
Key Features of Acrylic /PMMA
1.Good light transmission.
2.Good weather resistance.
3.Can be molded and reprocessed.
4.Widely usage, easy to dyeing and painting.
5.Non-toxicity.
6.High mechanical strength.
7.Light weight.
8.Good impact strength.
9.Good Insulation feature, widely used for different electrical equipment.
10.Good hard coating and scratch resistance
11.Good chemical resistance, superior to most other plastic materials.
12.Easy to clean and maintain.
51776 Plastic Products Suppliers
Short on time? Let Plastic Products sellers contact you.
