JJC High Quality Convenient camera plastic lens cap
l Scratch, dust damage protection
l Will not cause vignetting
l No need to worry about losing your lens cap
l With a filter attached to the camera lens, JJC ALC-LX100 is able to close perfectly
l Thickness of compatible filters is up to 8mm
l Allows you to take photos normally without removing the cap from the lens
JJC LH-83M Lens Hood features a filter access window for easier adjustment of specialty rotating filters such as ND and CPL filters while the hood is in place. The hood prevents unwanted stray light from entering the lens by extending and shading the end of the lens. What more, it has a non-glare matte finish on the inside to further prevent or limit lens flare. And there is no vignetting with the hood on. The "petal" shape of this lens hood maximizes the amount of hood coverage for the minimum amount of weight and hood area. It can also be placed backwards over the lens for a more compact storage solution. It allows you to put on a lens cap with the hood on, too. In addition, since the end of the lens is extended, you also get the added benefit of some extra protection from accidental impact. JJC LH-83M lens hood replaces Canon EW-83M.
Product Highlights
Comes with a filter access window for CPL, ND filters adjustment
Blocks stray light from entering the lens
Reversible for easy storage
Will not affect the use of lens cap
Non-glare matte finish prevents reflections
No vignetting will be caused with the hood on
Extra protection from accidental impact
The FX Series Flash Multiplier designed by JJC is for use with telephoto lenses of 300mm or longer. It is excellent for photography on wildlife, birding, wedding, evening party, portraits and more. The Flash Multiplier increases the flash output by about 2 to 4 f/stops and allows you to shoot at greater distances and shoot with smaller apertures. It also reduces the drain on battery power. The lens is lightweight and durable. It focuses and concentrates the output of the flash into a narrow beam, thus increasing your flash range. With four surfaces connected together and the reflective lining, the collapsible black box helps focus and enhance luminous beam and prevents light from leaking undesirably. Besides, the lens is held in place with no sagging or flopping, which ensures the best results and makes it easy to use. Just replace the flash adapter ring, and you can use the flash multiplier on much more other models of flashes. This is not only convenient, but also saves you much cost. The unit is also simple and quick to set up and remove. After folding it flat, you can store it in the supplied case. Furthermore, the unit is light in weight, making it convenient to carry. JJC FX Series Flash Multiplier will help you get more creative effects when you capture pictures.
Package Contents
Lens x 1
Collapsible Black Box x 1
Square Adapter x 1
Instruction Manual x 1
Carrying Case x 1
Product Highlights
Excellent for photography on wildlife, birding, wedding, evening party, portraits and more
Increases the flash output by about 2 to 4 f/stops
Allows you to shoot at greater distances and shoot with smaller apertures
Reduces the drain on battery power
By replacing the flash adapter ring, you can use the flash multiplier on much more other models of flashes
Easy attachment and removal, and folds flat for compact storage in supplied case
Lightweight for easily carrying
For use with telephoto lenses of 300mm or longer
With and Without the Flash Multiplier
1.JJC FX Series Flash Multiplier allows you to shoot at greater distances.
Product category:, Camera filters
Model/item no.:, Slim mrc-uv-77
Brand:, Tanso
Min. Order:, 50 pieces
Unit price:, Us $ 5-50 / piece
Country of origin1:, Ningbo , zhejiang , china (mainland)
Product packing way:, 1pc/plastic box
Payment term:, T/t, western union
Delivery port:, Fob ningbo
Date of delivery:, 7days
Sales method:, Export, manufacture, wholesale, service, retail
Quantity per month:, 200000
Product category:,Camera filters
Model/item no.:,Slim mrc-cpl-72
Brand:,Tanso
Min. Order:,50 pieces
Country of origin1:,Zhejiang , china (mainland)
Product packing way:,1pc/plastic box
Payment term:,T/t, western union
Delivery port:,Fob ningbo
Date of delivery:,7days
Sales method:,Export, manufacture, wholesale, service, retail
Quantity per month:,200000
4198 Photographic Optical Equipment Suppliers
Short on time? Let Photographic Optical Equipment sellers contact you.
Didea use precision cnc machining processing technic to make the products. It make the tripod very stable and the hardness and precision are much better than the secondary processing of casting and forging.The appearance is very smooth and beautiful.
K series tripod, based on the t series feature: done by machine and use hard anodizing technology, this makes our tripods more stable and fastness. K series tripod even upgrade the technology and the function: the column, bearing plate and the leg tube can be assembled as monopod, even leg tube and bearing plate can be fixed as monopod
K series function:
1. Tripod converted to monopod.
2. Low angle shoot without center column.
3. Shoot with inverted center column.
4. Inverted folded to save space, convenient to carrying, traveling and outdoor shoot.
8.Power save mode
9.Overheating protection
12.Support high speed continuous shooting:in 1/16 or less brightness, it can support 12eps high-speed continuous shooting
13.Support red-eye reductin flash mode
14.Raster af asist lamp
15.Built-in wide panel & bounce card
ISO9001-2008 & ISO14001-2004 arrpoved factory
CE, ROHS, SGS, UL certificated
Customer's design and logo are welcome
100% strict qc test for each finished product
Strong r&d team specially for oem&odm service
Voeloon v300(oloong sp-660ii) ttl professional camera flash light
1) ttl auto flashlight(i-ttl for nikon or e-ttl ii for canon)
2) guide number:35(iso100, 35mm)
3) fast recycling time:2s(full power output, 4*aa ni-mh batteries)
4) 22 levels light quantity output control system
5) s1/s2 flash mode(support for multiple lamp lighting system)
6) overheating protection(comes with the temperature detection system)
7) large lcd screen
8) dual auxiliary focus lamp
9) for nikon, canon, olympus & pentax
10) iso9001 & iso4000
Voeloon v600(oloong sp690ii) digital camera accessory flash speed light
Description:
1) support nikon i-ttl(ttl: 24mm-180mm;gn:35)
2) compatible with nikon wireless creative lighting system(master/slave mode)
3) stroboscopic system
4) fast recycling time
5) large capacity electrical storage system
6) sound monitoring system
7) high-definition lcd and led backlit
8) xenon lamp overheating protection system
9) high-temperature insulation
10) metal mounting foot
11) auxiliary focus system
12) light lead flashing system
13) iso9001 & iso4000
14) advanced application;you can set exposure compensation¡¢exposure bracketing¡¢front/rear-curtain sync of external flash, and it supports red-eye reduction flash mode¡¢fv lock¡¢power saving mode.
Wireless system
System mode: digital fsk 2.4ghz
Distance range: more than 400m
Wireless channel: 15 fixed channels and 1 auto channel
Trigger mode
Receiver: output support ttl, hot shoe and connecting cable socket
Power
Transmitter: transceiver 300hrs(aa 1.2v 2400mah rechargeable battery)
Receiver::receiver 200hrs(aa 1.2v 2400mah rechargeable battery)
Performance
Flash mode: e-ttl, ttl, m (for canon)
Support mixed mode output(such as, ttl mode in group a, m mode in group b)
Support different ev addition/subtraction of each ttl group setting
Support output light ratio
Sync mode: 1st curtain, 2nd curtain, high speed sync red-eye reduction
Group control: 3 different groups
Function: supports flash zooming, focal length, iso, shutter speed, fv lock and fp
Sync speed: 1/8000s
Compatible flash: flashgun, studio light and outdoor light
Firmware support: support upgrade the device online
Rikon standard color packing
Weight:0.8kg
Dimensions: 19.5cm*12.5cm*6.5cm
1.Features:
1.1Vf-902 is using 2.4ghz which is global free frequency
1.2Using fsk system which more stable.
1.3Operating distance up to 100m.
1.4Flash sync speed up to 1/250s.
1.5Purchase the meyin studio connecting cable to control speed lite or studio light.
1.6Purchase the meyin shutter connecting cable to control camera shutter.
2.Specification:
Type: fsk 2.4ghz wireless system
Operation range: 100m
Channel: 16
Shutter release: half-press, full-press
Tx socket: 3.5mm 3 steps input plug
Rx socket: 3.5mm 3 steps output plug
Usable number: >10000times(2xaaa alkaline cell)
Rx stand-by-time: 45hours (2xaaa alkaline cell)
Dimensions£º(w x l x h): tx: 76 x 36 x 35 mm rx: 76 x 36 x 38.7 mm
3.Package included
Vf-902tx: 1pcs
Vf-902rx: 1pcs
Instructions manual: 1pcs
Rs-801
Cable shutter remote
Specification
Style: cable shutter release control
Mode: two-press button for focus and shoot. Hold the button for continuous shooting or long exposure.
Cable length: 70cm
Size: 91mm(l) x 23.7mm(w) x 17.1mm(h)
Advantage:
1.Rs-801 shell made of abs material. They are all new material instead of recycle material.
2.Rs-801 button made of pure copper. It can be pressed more than 1 million times.
3.Rs-801 support focus, shot and bulb mode.
4.Rs-801 always use the latest version connector.
Haida Circular Polarizing (C-POL) Filters use the neutral polarization material, without any color cast. Through special techniques to glue them together with optical glass, also with special crack resistance treatment.
For the concern that you may go to the rain forest where is hot and wet, or to the area where is freezing, so an excellent quality CPL filter must go through the extreme temperature difference. Under these circumstances, an ordinary polarizing filter will always have the problem of air bubble or adhesive failure. But Haida's special strict processing technique just put an end to all these bad results may occur.
When using the polarizing filter, smooth rotation will be needed to take the brilliant pictures.Ordinary CPL filters could easily get frozen when in low temperature, or lose the comfortable damping feel in high temperature. Our special processing technique guarantee each CPL filter from Haida has the steady rotating function between -40 and 80.
Haida Wide Angle Variable Neutral Density Filters is made of special selected optical material, by rotating the frame, the density could be easily adjusted from ND2 (ND0.3) to ND1000 (ND3.0).The premium special neutral optical material guarantee no color cast would occur when adjusting. Original wide angle design just acts as the same effect as the ultra slim filter frame to eliminate "ghosting".
The upside part of frame is made of premium alloy material with special non-reflection treatment, the under part is in bright dark. The whole filter looks so kingly. The special processing techniques guarantee the steady rotating function in any temperatures from -40 to 80.
Warmly remind you that because of physical properties and light changes in different circumstances,sometimes slight crossbar shadow may occur, please decrease the neutral density till it disappear, then taking pictures.
4198 Photographic Optical Equipment Suppliers
Short on time? Let Photographic Optical Equipment sellers contact you.
