1. Product Introduction:
This product is belong to C9 category. It has the properties of good mutual solubility, water resistance, ethanol resistance and chemical resistance. It has good chemical stability over acid and alkali, good adhesive strength and good thermal stability etc.
2. Application:
This product is suitable for paint.
Z Premium Hydraulic Oil ISO VG 46, Anti-Wear Hydraulic Oils have high viscosity index, chemically stable, good quality mineral base oils which have been further fortified with anti- oxidant, anti-corrosion, anti-wear and anti-foam additives. Recommended as fluid media for hydraulic systems operating under moderate to severe conditions. Also recommended for circulation, splash, ring oiling system, industrial gear and air compressors.
31837 Petroleum Oil Related Products Suppliers
Short on time? Let Petroleum Oil Related Products sellers contact you.
Z Premium Hydraulic Oil 100,is good quality, top achievement hydraulic oil developed to accommodated the appeal for environmentally acceptable hydraulic fluids. This product is based on synthetic, readily biodegradable esters.
Z Premium Hydraulic Oil 150, is a non-compressible fluid that is used to transfer power within hydraulic machinery and equipment. Otherwise known as hydraulic fluid, hydraulic oil can be synthetic- or mineral-based.
Z Premium Hydraulic Oil 320, is formulated with a high level of R & O inhibitors for maximum protection against rust and oxidation in hydraulic pumps and motors.
Recommended for Use Where R & O Oils are Permitted in:
Hydraulic Power Systems.
Hydraulic Drills.
Hydraulic Pumps.
Air Compressors.
Industrial Gear Drives
Z Premium Mineral Oil is used in the manufacture of Bulk Drugs, Cosmetics, Textile Auxiliaries, Plant Spray Oil, Agrochemicals, Aerosols, Dye Intermediates, Paper Industry, Inks, Perfumery, Specialty Lubricants, Plastics - used as Lubricant Plasticiser, Food Industry, Specialty Chemicals, Incenses, Personal Care Products etc.
Z Premium Metal Cutting Fluid,The two main tasks of cutting fluid are cooling and lubricating. ... As well as cooling machinery, cutting fluids also help metalworking processes by lubricating the area between the cutting edge of a tool and the chip
Z Premium Cutting Oil,are used to reduce friction, through lubrication, which is a tribological phenomenon characteristic of machining processes, and occurs at the contact between workpiece and tool. Also, cutting works to remove the heat generated from the cutting zone through cooling.
Z Premium Neat Cutting Oil are used in a variety of machining operations e.g. grinding, turning, milling, broaching, drilling, tapping, gear cutting etc. primarily to provide cooling and lubrication which lead to good tool life and appropriate surface finish of the components being machined.
Z Premium Hydraulic Oil 68 -They provide long service life and are recommended for hydraulic and circulation systems of a wide variety of equipment. These oils are also used for compressor crankcase lubrication, but are not recommended for lubrication of turbines and equipment having silver-coated components.
Z Premium Rubber Processing Oil is mixtures of paraffinic, naphthenic and aromatic compounds of wide distribution of molecular weight. Rubber process oil is used in the rubber industry to enhance the process ability of rubbers and rubber compounds and increase the bulk of rubber so as to lower the price.
Z Premium Vacuum Pump Oil serves as a mechanical lubricant and a medium for trapping gas molecules. It's chemically stable, unreactive to most gases and materials, and has a low-vapor pressure.
Z Premium Vacuum Pump Oil VM4 is specially developed having low vapour pressure 1 x 10-6 mm Hg at 20C. This oil is having a very high thermal stability which helps in maintaining constant vacuum for the operation.
Z Premium Vacuum Pump Oil VM100 serves as a mechanical lubricant and a medium for trapping gas molecules. It's chemically stable, unreactive to most gases and materials, and has a low-vapor pressure.
Z Premium Spindle Oils are anti-wear oil that is formulated for use in the lubrication of high-speed spindle bearings in precision grinders and other machine tools that require the use of low viscosity oils. It can be applied by misting, drop feed, force-feed and wick feed, hand oiling or by the use of circulation systems.
Z Premium Heat Transfer Oil 400 is a liquid that takes part in heat transfer by serving as an intermediary in cooling on one side of a process, transporting and storing thermal energy, and heating on another side of a process.
Z Premium Heat Transfer Oil 500 -highly refined and stable paraffinic oil designed to be used as a heat transfer medium and quenching oil. In many industrial applications heating is provided indirectly by circulating hot oil through a heat exchanger, thus reducing hot spots and increasing the safety of the heating process.
31837 Petroleum Oil Related Products Suppliers
Short on time? Let Petroleum Oil Related Products sellers contact you.
