Sino-NSH-PF is a portable multi-stages high precision oil purification equipment. Sino-NSH-PF is mainly used to the negative mechanical impurities. Because of flexibility and portability, it is widely used in the fields of power station, petrochemical industry, metallurgy, mechanical engineering etc. For oil filling, oil pumping as well as high precision purifying and pipe cleaning.
Sino-NSH-LV is a dehydration and degassing unit with thermal and vacuum processing. It is a multifunctional purifier which can treat various kinds of lubricant oils. Sino-NSH-LV is mainly used to remove dissolved and free water, and particulate impurities effectively so as to increase special index of lubricant oil. Combining with vacuum system, the multi-stage filtration system adopts a high dehydration efficiency . It has a strong anti-emulsifying capability, which could separate the large amount of water from oil and the trance water from oil. The clearness of final oil can be under 6 NAS and water can be under 100 PPM after processing with our machine. Sino-NSH-LV maintains an optimized structure and safe controls so as to meet comprehensive requirement of transformer manufactures and service companies.
Sino-NSH-TC is a complete oil purification system integrating vacuum oil purifier and centrifugal separator, widely used for the filtration and purification of turbine oil, as well as other lubrication oil. Sino-NSH-TC adopts vacuum and centrifugal technology, designed to meet the device needs of customers. It can effectively remove free water, dissolved water as emulsified water, reduce the water content to less than 100 PPM. Also remove the particulate contamination from oil with high precision centrifugal separator. centrifugal separator is able to remove 99.995% of solid contaminants and 99.4% of water. Various capacities are available for this system, and some optional device such as PLC Control system, Container structure,etc.
Sino-NSH-TF-Z is a dehydration and filtration unit, especially suits for purification of turbine oil and fuel,etc. Sino-NSH-TF-Z combines the latest innovations in coalescence separation technology and micro-glass filter media in one system to achieve optional fluid cleanliness. With specially designed filter elements, it can efficiently separate water from oil quick, break the emulsification, as well as remove particulate pollutants. After separation, the water content can be reduced to less than 100 PPM, and the cleanliness can reach or better than NAS 4-6 Grade. Sino-NSH-TF-Z can effectively save operating cost as no heating or vacuum is required, and it is designed for continuous operating and unattended operation.
Sino-NSH-TF-A is fully automatic unit developed based on NSH-TF, realize the intelligence of the machine and simplify the operation. Sino-NSH-TF-A utilizes the brand programmable logic control and a series of instrumentation, alarms and interlocks to provide a fully automatic operation. Manual control of various functions is provided are required. Several Pilot Lights are provided to indicate operations status of key components and alarm conditions. With full scale of on-line testers and detectors as option, Sion-NSH -TF-A could implement accessible and reliable solutions for unique request and practical usage.
Sion-NSH-TF-E is explosion-proof type designed for flammable and combustible working conditions in power plant, petroleum, chemistry, coal mining, metallurgy and other industries. Sion-NSH-TF-E adds an explosion-proof system compare to NSH-TF, using comprehensive explosion-proof technology. The components such as heating system, electric control system, motor and solenoid valves etc are well-selected explosion-proof type adapt to different danger lever.
Sion-NSH-TF is a filtration and dehydration unit with thermal and vacuum processing. It is ideal for filtration and dehydration of turbine oil. This units can extend turbine oil life by removing contaminates from oil, such as water, gas and particulates, improve the oil properties. Sion-NSH-TF combines vacuum dehydration technology and coalescence technology, can effectively remove both emulsified and dissolved water from turbine oil. Fitted with specially made emulsifying device, it is capable of making turbid emulsified oil very clear. Multi-stage precision filters minimizes impurities and ensures oil cleanliness, which can reach or better than NAS 6 Grade. TF series is particularly suitable for purifying turbine lubricating oil. It also apply to treat hydraulic, coolant oil and other lubrication in which contain large of water, vapor, impurities, sludge, dielectric and colloid. TF series will result in the improvement of the properties of turbine oil, other lubrication and extend the maintenance period of turbine or other equipment which has lubrication system and keep them operate in good condition.
NSH-VFD-A is a fully automatic dehydration and degassing unit. It could be tailored according to practical usage of end-user on either functional or operative consideration. It utilizes the brand programmable Logic Control and a series of instrumentation, alarms and interlocks to provide a fully automatic operation. Manual control of various functions is provided as required. Several Pilot Lights are provided to indicate operational status of key components and alarm conditions.
Sino-NSH-VFD is a dehydration and degassing unit with thermal and double-stage vacuum processing. Sino-NSH-VFD is mainly used to improve the properties of insulation oil in electric power transformer and other oil filled electrical equipment. It can remove dissolved and free water, dissolved gas and particulate impurities effectively so as to increase special indexes of insulation oil. Sino-NSH-VFD combines vacuum flashing evaporation technology and laminating gradual-close filter technology to reach best performance of oil purification. Meanwhile, by integrating efficient thermal and double-stage vacuum, the breakdown voltage is high improved, which can be increased from 25kv to over 70kv. Sino-NSH-VFD maintains an optimized structure and safe controls so as to meet comprehensive requirement of transformer manufactures and service companies.
Naphtha Hydrotreatment Unit
62 meters high 4.5 meters in diameter.
1.Locking differential pressure alarm and prevent the false alarm when cold start. 2.Filter strainer with by-pass valve to avoid system fluid off. 3.Motor lack phase or multiphase protection 4.Acousto-optic differential pressure alarm prompt replace filter element 5.coarse filter to protect pump in suction oil mouth. 6.Oil outlet diffuser to prevent air from oil tank 7.Universal wheel makes cart flexible and convenient 8.Increase the oil collecting tray and tubing fixed installation 9.Oil pump with over flow valve
HVP series oil purifier is designed to filtering hydraulic oil and lube oil by re move water,air and dirty. It is movable or fixed for facilitate customers. It makes oil oxidation to reduce to minimum,keeps lubricity and reduce the inc lusion of air then improve the reliability and prolong the service life of systemcomponents and oil.By reducing acid formation,it can control the corrosion in oil system.Acid is formed by the interaction between oil and prill in system. The Pall HVP fluid conditioning purifier removes 100% of free water and as much as 95% of dissolved water. It also removes 100% of free and entrained gases and up to 90% of dissolved gases. Particulate removal is achieved using a high Beta rated (5(c)=1000) Ultipor III filter element to polish the fluid before discharge back to the system reservoir. The HVP can be moved from one system to another or left as a permanent in stallation. It is only be contacted to the 3 phase power.The HVP purifier is si mply connected to an electricsupply, the inlet valve opened and reset and start buttons pressed to start the fluid purifying process. Model HVP100 HVP170 Flow rate (L/min) 100 170 Inlet pressure(bar) -0.4 1 Outlet Max pressure(bar) 8 Normal work vacuum(bar) -0.6-0.9 Inlet size M64 2 Outlet size M52 2 Total power(KW) 38.85 41.70 Oil type Hydraulic oil,lube oil Peak viscosity(cSt) 260 Temperature Range( ) 10 70 Net Weight(Kg) 980 1100 Measurement L(mm) 1600 1750 W(mm) 1200 1300 H(mm) 2100 2100 Dehydration Free water Remove 100% Dissolved water Remove95% Deaeration Free gas Remove 100% Dissolved gas Remove 90%
The Pall HNP fluid conditioning purifier removes 100% of free water and as much as 80% of dissolved water. It also removes 100% of free and entrained gases and up to 80% of dissolved gases. Particulate removal is achieved using a high beta rated (5(c)=1000) Ultipor III filter element to polish the fluid before discharge back to the system reservoir.Other replacement filter media grades are also available to suit application requirements. Replacement HNP series oil purifier is designed to filtering oil by remove water,air and dirty. Oil oxidation,Lubrication performance loss and aeration influence directly on reliability of system and service life of system component and oil. The HNP can be moved from one system to another or left as a permanent installation. The HNP purifier is simply connected to an electric supply, the inlet valve opened and reset and start buttons pressed to start the fluid purifying process. Automatic controls, integral to the unit, constantly monitor the operation and will safely shut down the system if fluid levels and pressures are outside normal limits. Model HNP006 HNP021 HNP073 HNP200 Flow rate (L/min) 10 20 70 229 Inlet pressure(bar) 10 -0.4~0.4 -0.4~3 -0.4~3 Outlet Max pressure(bar) 10 7 7 8 Normal work vacuum(bar) -0.6 0.9 Inlet size G1 1/4 G1 G2 G4 Outlet size G1 G1 G1 1/2 G3 Motor power(KW) 0.67 2.25 6.4 22.7 Oil type Hydraulic oil,lube oil,turbine oil Peak viscosity(cSt) 700 Temperature Range( ) 10~70 Net Weight(Kg) 75 180 450 (600 with heater) 1760 Size L(mm) 695 1090 1580 2679 W(mm) 455 620 680(1170 with heater) 1662 H(mm) 1041 Movable 1040 1880 (2113 With heater) 3266 Fixed 1020 1780 Dehydration Free water Remove 100% Dissolved water Remove90% Remove 80% Remove 90% Deaeration Free gas Remove 100% Dissolved gas Remove 80% No. Flow rate(L/min) 006 10 021 20 073 70 200 229 No. Voltage M 220V 1PH R 380V 1PH T 415V 3PH No. Frequency(Hz) 3 50Hz 3PH 4 60Hz 3PH 5 50Hz 1PH
The HEP oil purifier mainly used for filtering insulating oil to remove water gas and mechanical admixture in above 110/220/500kv electric transmission and transformation equipment.The it can improve the intensity of resisting high pressure and oil quality.Finally it keeps the safe operation of HV electric equipments.HEP oil purifier is used for filtering oil of transformer,capacitor,mutual inductor. The main parts are oil-feed pump import or export filter strainer,vacuum degassing chamber,heater,pipeline,electric cabinet,electric control system,rain cover(stainless steel and aluminum composite panel). Products unique characters 1.Transformer add oil and re-paint 2.Transformer deaerate,dehydrate and remove dirty 3.Transformer do drying process circularly 4.Transformer vacuumize and vacuum add oil Flow rate (L/min) 20/50/100/150/200 ultimate vacuum(Pa) 5 normal operation of the vacuum degree(Pa)
Technical data Model name:PALL Coalescence separation purification plant Work condition:Indoor operation Media:thin oil(low viscosity lube oil) Work temperature:40-70 Media viscosity: 46cSt Working pressure:
Double Stage Vacuum Transformer Oil Purifier, Mineral Dielectric Oil Purification Plant Application: This machine is applied to treat various of unqualified insulation oils including aging transformer oil specially for the power which is above 110KV, mutual inductor oil, switch oil and so on. Also it can inject the insulating oil into the transformers on-line. Regenerate the seriously deteriorated oil by removing the polarity materials. series double-stage vacuum transformer oil purifier adopts a creative advanced technology. The machine is widely used for industries of power plant, power station, electricity company, transformer factory, metallurgy, petrochemical, mechanical engineering, transportation, railway and transformers manufacturing etc Features: 1. PH 5.5 2. Acid 0.03mgkoH/g 3. Flash point 145 4. Dielectric strength 75KV 5. Dielectric loss: tg´(90)% 0.001 6. High vacuum: High point-Vacuum 5pa Working-vacuum 35pa 7. High absorption speed: Absorption speed power 333L/Sr. 8. Duplex 3D stereo-evaporation, eliminating the liquid water quickly 9. UK G technology by which the trace water that is show chain, such as dissolved water, can be removed effectively. 10. Distinctive removing impurities system filtering through double FH trapezoidal network and absorbing by high polymer without the mechanical power 11. Carbon fiber infrared heating system that can make the oil contains zero sum of ethyne after the treatment 12. Specially applied to vacuum oiling and drying for power transmission equipments that are over 110KV 13. The oil of any grades can be treated on line at the working site
Material: 100% polypropylene. > Standard color : White. > Function: Absort oil only while repelling water.Absorb oil or oil-based liquid only,engine oil,hydraulic oil,gasoline,diesel,keroseneâ?¦ect. > Suitable: Apply to land,water surface. > Characteristic : *After fully absorbing,keep floating always. *Recycle about 80% oil after fully absorbing,and reuse it. *Burning after using,ashâ?¤0.02%. *It has strong oil absorption capacity. > Our types has standard type, dimpled type, perforated type. The most common size is 40 cm *50 cm. The thickness is 2 mm, 3 mm, 4 mm, 5 mm...ect.
Wellhead and Christmas tree equipment is an important equipment of oil and gas drilling, the casing head, tubing head, and oil (gas) tree of three parts, used to connect the casing string and tubing string, and the sealing between the layers of casing and tubing annulus, and can control the production wellhead pressure and adjust the oil (gas) wellhead flow, also can be used in acid fracturing, injection, testing and other special operations. Wellhead devices and trees can be divided into oil production wellhead devices, gas recovery wellhead devices, fracturing and acidification wellhead devices, thermal recovery wellhead devices, and other wellhead devices. The Wellhead devices and tree is mainly assembled by a gate valve, throttle valve, three-way, four-way, plug valve emergency cut-off valve and other pressure components. Working Pressur:2000PSi,3000PSi,5000PSi,10000PSi,15000PSi, Technical Parameters 1. Nominal diameter:2-1/16,2-9/16,3-1/16,4-1/16, 2.Specification level:PSL1,PSL2,PSL3,PSL3G,PSL4 3. Performance levels: PR1, PR2 4. Material level: AA, BB, CC, DD, EE, FF, HH 5. Temperature level: K, L, N, P, S, T, U, V 6. Working Medium: Oil, Natural Gas, Mud and Gas Containing H2S, CO2 7. Execution standard: API 6A, NACE MR0175 8. Main Components: Casing Head, Tubing Head, FC type Gate Valves, Flange, Cross, Choke Valve, Casing Hangers, Tubing Hangers, Pressure Gauges, etc. Wellhead Christmas Tree features include. Well Intervention Pressure Relief Chemical injection Tree and well-monitoring points Flow composition and rates Valve and throttle position feedback Connection points The more here.
Served Customers in Many industries Around the World. High Tensile Performance, Suitable for River/harbour/lake/ocean/offshore. Oil Resistant, Wear-resistant, Seawater Corrosion Resistant and UV Aging Resistant.
