Fuel Oil is a fraction obtained from petroleum distillation either as a distillate or a residue Broadly speaking oil is any liquid petroleum product which is burned in a furnace or boiler for the generation of heat or used in an engine for the generation of power except oils having a flash point of approximately 40 C 104 F Oil is made of long hydrocarbon chains particularly alkanes cycloalkanes and aromatics The term Fuel Oil is also used in a stricter sense to refer only to the heaviest commercial fuel that can be obtained from crude oil heavier than gasoline and naphtha
Fuel oils are used as fuel for power generation marine bunkers and large industrial heating plants Fuel oil 180 CST also known as Bunker Fuel or Residual Fuel Oil is characterized by its viscosity which is measured in centistokes CST The number 180 indicates the maximum viscosity of the oil at 50 degrees Celsius This specification makes it a relatively thick and viscous fuel compared to lighter fuel oils Both CST 180 and CST 380 fuel oils are considered heavy fuel oils and are commonly used in the shipping industry They are often referred to as bunker fuels and are used in vessels like cargo ships container ships and oil tankers
Speciality
The products offered by Matr Consulting are 3 wide range of Industrial Lubricants, Automotive Lubricants & petroleum. Products with standard specifications are made by reputable companies and delivered to us. These products are prepared and delivered to the customer based on the type of customer request. All financial payments are in cash
Petroleum products are materials derived from crude oil (petroleum) as it is processed in oil refineries. Unlike petrochemicals, which are a collection of well-defined usually pure organic compounds, petroleum products are complex mixtures. The majority of petroleum is converted to petroleum products, which includes several classes of fuels
Lubricants (produces light machine oils, motor oils, and greases, adding viscosity stabilizers as required), usually shipped in bulk to an offsite packaging plant
Separated by the melting point, the paraffin wax is usually at 2 C, as in us: 54-56 C, 56-58 C, 58-60 C, 60-62 C, 64-66 C.
All types of wax products must withstand cold well for paraffin wax, which means that it does not melt or soften and does not deform at a specific temperature. Depending on the conditions of use, locations and seasons of use, as well as differences in the method of use, commercial paraffin wax is required for a series of different melting levels.
Separated by oil knowledge, it can often be divided into: Fully refined paraffin, Semi-refined paraffin, and Crude wax. In addition, paraffin wax needs to be heat resistant, oil resistant and light resistant, otherwise the color will turn yellow after application. Excessive oil exposure impairs the color and stability of the paraffin wax, and also reduces its hardness. The main factors that affect the stability of paraffin wax are its non-hydrocarbon compounds and the low concentration of hydrocarbons.
We can provide services for the purchase of Aviation Turbine Fuel (Jet A1, JA1, JP A1) for export.
Origin: Kazakhstan/ Russia, MOQ:500.000BBLS, FOB price: $73/$69, CIF price: $69/$65 (Gross and Net respectively).
contact us for the procedure.
Note: Seller do not work according to someone else's procedures.
The seller will deliver on the terms: CIF / FOB ports ROTTERDAM, SHARJAH UAE/MERSIN TURKEY, UST-LUGA.
Paraffin are products produced in oil refineries, from the deparaffination of mineral oils. Paraffins have many applications and are available in different formats: solid paraffin (slabs, pellets, powder) and liquid paraffin.
Paraffin wax is a highly popular, clean burning wax which has a brilliant scent throw when compared to naturally sourced waxes.Often pure white and made from petroleum, paraffin wax is easy to work with, stable when shaped and odourless when burnt. The wax mixes well with all dyes and scents we provide with no adverse effects making it the ideal wax for candle making beginners and adepts alike.
Paraffin wax is used for many products, including candles, paper coating and other industrial uses. It is white and comes in a
variety of melt points. It can be used alone or as an additive to provide specific properties to a product. Blended Waxes has a variety of domestically sourced paraffin wax products available.
If you are looking for a paraffin wax with a custom melt pointï¼?Junda is your excellent choice !
Fushun 0.5%oil content refined solid paraffin wax, kunlun brand.
Paraffin Wax
1.100% Pure Paraffin Wax
2.ISO 9001 proved
3. Transparent and White
4.Low Oil Content
5. SGS
6. REACH
Fully refined and semi refined paraffin wax is used widely, mainly used as candles,board,plastics,rubber and other commodity(like waxed paper ,crayons,candles,carbon paper) of the component and packing materials, baking container with dressing, used for electrical components, insulation rubber aging resistance and increased flexibility, etc.
Naphtha is a flammable liquid made from distilling petroleum. It looks like gasoline. Naphtha is used to dilute heavy oil to help move it through pipelines, to make high-octane gas, to make lighter fluid, and even to clean metal. It is a liquid petroleum product that boils from about 30�°C (86�°F) to approximately 200�°C (392�°F), although there are different grades of naphtha within this extensive boiling range that have different boiling ranges. The term petroleum solvent is often used synonymously with naphtha. On a chemical basis, naphtha is difficult to define precisely because it can contain varying amounts of its constituents (paraffins, naphthenes, aromatics, and olefins) in different proportions, in addition to the potential isomers of the paraffins that exist in the naphtha boiling range. Naphtha is also represented as having a boiling range and carbon number similar to those of gasoline a precursor to gasoline.
MARINE GAS OIL (MGO) describes marine fuels that consist exclusively of distillates. Distillates are all those components of crude oil that evaporate in fractional distillation and are then condensed from the gas phase into liquid fractions. Marine gasoil usually consists of a blend of various distillates.
Heavy Fuel Oil (HFO) is a residual fuel incurred during the distillation of crude oil. It is primarily used to generate motion and/or heat that have a particularly high viscosity and density. Mainly used in industrial boilers and other direct source heating applications. It is also used as a principal fuel in marine applications and large diesel engines. Generally HFO typically includes bitumen, asphaltenes and long chain polycyclic aromatic hydrocarbons.
Mazut-100 is a fuel oil that is manufactured to GOST specifications, for example GOST 10585-99. Mazut is almost exclusively manufactured in the Russian Federation, Kazakhstan, Azerbaijan, and Turkmenistan. The most important thing when grading this fuel is the sulphur content.
Aviation Kerosene Colonial Grade 54 Jet Fuel JP 54: Jet fuel A-1. Jet fuel designed for use in aircraft powered by gas-turbine engines. It is clear to straw-colored in appearance. The most commonly used fuels for commercial aviation are Jet A and Jet A-1 are produced to a standardized international specification.
Paraffin waxes in a solid state are usually white, translucent, tasteless and odorless. They are hard, relatively brittle and have a slightly dry feel. In a molten state, paraffin waxes are clear, colorless liquids of low viscosity. When melted, these waxes increase in volume by about 5-8%, resulting in a decrease in density.
Paraffin will react at high temperatures with either oxidizing or halogenating agents. This reaction produces either fatty acids and hydroxy acids or halogen substitution products respectively. Although paraffin has many useful characteristics, most commercial applications are based on its resistance to water and vapor and its glossy appearance when polished.
Aqueous Urea Solution or diesel exhaust fluid (DEF) reduces harmful NOx emissions from diesel engines and enable diesel passenger cars to comply with the Euro 6 exhaust standard.
AdBlue, DEF & ARLA 32 are the global alternative brands for Aqueous Urea Solution products (AUS).
Our supply of Aqueous Urea Solution is mainly directed to our clients in Europe.
Gasoline octane rating denotes its resistance to pre-ignition or knocking in an engine.
It measures the fuel's ability to withstand compression before igniting. A higher octane
rating signifies greater resistance to premature combustion, crucial for high
performance and turbocharged engines. Octane ratings typically range from 87
(regular) to 93 (premium) in the United States, with premium fuels offering enhanced
performance and engine protection. Selecting the appropriate octane level
recommended by the manufacturer ensures optimal engine efficiency and longevity.
Understanding octane ratings aids drivers in choosing the right fuel for their vehicles,
balancing performance, and cost-effectiveness.
Fuel oil CST (CST stands for Centistokes) 180, 280, and 300 are grades of heavy fuel oils used primarily in industrial applications such as marine vessels and power generation. CST 180 has a lower viscosity, making it suitable for engines with higher
operating temperatures. CST 280 and 300 are heavier grades with higher viscosities, often used in applications requiring more power output and in equipment with larger combustion chambers. These fuel oils are derived from crude oil refining processes
and are valued for their energy density and affordability, making them crucial in
various sectors reliant on reliable and cost-effective energy sources.
MAZUT M100 is a heavy, low-quality fuel oil primarily used in industrial boilers and furnaces. It is derived from the distillation of crude oil and contains high levels of sulfur and other impurities. Due to its thick consistency and high viscosity, it requires preheating before use. MAZUT M100 is classified into different grades based on its viscosity and sulfur content, with higher grades indicating lower viscosity and sulfur content. It is commonly utilized in power generation, ship fuel, and as a feedstock in certain industrial processes. Despite its drawbacks, MAZUT
M100 remains a cost-effective option for heavy-duty industrial applications.
Russian Export Blend Crude Oil (REBCO) is a type of crude oil produced in Russia.
It is a light, sweet crude with relatively low sulfur content, making it desirable
for refining into high-quality petroleum products like gasoline and diesel. REBCO
is an important component of Russia's oil exports, accounting for a significant
portion of its global trade. Its favorable characteristics, including its low viscosity
and high API gravity, make it attractive to refineries worldwide. As one of Russia's key export commodities, REBCO plays a crucial role in global energy markets and is subject to fluctuations in demand and pricing.
32119 Petroleum Oil Related Products Suppliers
Short on time? Let Petroleum Oil Related Products sellers contact you.
