IOC JET A-1 is a petroleum distillate blended from kerosene fractions having Aromatics below 20 % v/v, Total sulphur below 0.25 % mass, Mercaptan Sulphur below 0.002 % mass, freezing point below - 47 0 C and a flash point above 38 0 C. It contains Static Dissipator additive STADIS 450.
Density @ 15 C max.... 991 kg/m3 Viscosity @ 50 C max.... 180 mm2/s Water max... 0.5% (v/v) Sulphur max... 3.5 % (m/m) Flash Point min.... 60 0C Pour Point max... 30 0C Micro Carbon Residue max... 15 % (m/m) Ash max.... 0.1 % (m/m) Total Sediment Potential max... 0.1 % (m/m) Vanadium max.... 200 mg/kg Aluminium + Silicon max... 80 mg/kg Zinc max... 15 mg/kg Phosphorus max... 15 mg/kg Calcium max... 30 mg/kg
The unit of viscosity used is the Centistoke and the d6 fuel most frequently quoted are listed below in order of cost, the least expensive first : * IFO 380 â?? Intermediate d6 fuel oil with a maximum viscosity of 380 Centistokes * IFO 180 Intermediate d6 fuel oil with a maximum viscosity of 180 Centistokes * LS 380 Low-sulphur (
1- Antioxidant in hydro processed fuel mim/max..... 17/24 Mg/l 2- Antioxidant non hydro processed fuel max.....24 Mg/l 3- Static dissipater first doping ASA-3 max ...... 1Mg/l 4- Stadis 450 max.... 3Mg/l 5- Specific energy, net min.... 18.4 MJ/kg 6- Smoke point max.... 19M/m 7- Luminomitier number max.... 45 8-Naphthalenes max.... 3%volume 8-Total Acidity max... 0.1 MG. KOH/g 9-Aromatic max... 22.0%vol 10-Sulphur Total max... 0.3 %mass 11-sulphur Mercaptan max... 0.003 %mass 12-Recovered residuals max.... 1.5%vol 13-Loss max.... 1.5%vol 14-Flash Point max... 42 Centigrade 15-Density at 15.�°C Min/Max... 776/840 kg / m2 16-Freezing point max.... - 40 Centigrade 17-Corrosion copper (2hrs at 100c) max.... 1 18-Corrosion silver (4hrs at 100c) max.... 1 19- Filter Pressure differential mm.Hg max... 25 20-Tube deposit rating (visual) max....
1-Ash content..... 0.14%max 2-Mass fraction of sulphur.... 0.5max 3-Temperature of solidification.... 25� C max 4-Kinematics viscosity.... 118max 5- water content.... 0.5%max 6- Mechanical impurities... 0.1%max 7- Hydrogen sulphide content Hâ??S ppm..... 0.5max 8- Carbon residual.... 7%max 9- Aluminium (Al) ppm.... 5 max 10- silicone (si)..... 12 max 11- sodium (NA).... 15max 12- Asphaltene m/m... 3.6%max 13- lnltial Bolling Point deg.... 216�°C 14- Final Bolling Point deg.... 550C 15- percent recovered.... 78%vol 16- Residual.... 22%vol 17- Total Nitrogen... 0.192%m/m
1-Blend crude oil espo 2-Fuel oil mazut m100gost 10585-75/99 3-gas oil diesel D2 0.2/62 gost 305/82 4.aviation kerosene colonial grade 54jet fuel/jet A1 5.virgin d6 fuel oil 6.en 590 ppm (ulsd) 7.liquidified natural gas(lng) 8.russian liquidified petroleum gas lpg 9.russian bitumen 60/70 and 80/100 10.russian light cycle oil (LCO) 11.Rrussian diesel automotive gas oil (AGO) 12.Rusian gasoline 87-89-91-92=95 octanes Product offer
CommodiTY. JP 54 A1 Origin: Russia Delivery: ANY SAFE Port / CIF Trial Qty: 500,000(Minimum); 2 ,000,000 (Maximum) Contract Qty: 12 months + Rolls and Extension CIF Price: Net US$ 42/Barrel
Petroleum products
Citru-Etch II Emulsion is a stable, micro particle, (O/W) oil in water emulsion, formulated for use in investment casting to remove silicone release coating deposits and, with minimum etching, chemically modify wax pattern surfaces to enhance refractory slurry coat adhesion. Citru-Etch II Emulsion is formulated to provide both an environmentally responsible and safe method of use. The emulsion is sufficiently stable to function as a uniform cleaner for wax patterns and allows several months shelf life for unopened drums stored under ambient conditions. CAUTION: Heat destabilizes the Citru-Etch II Emulsion; drums should be stored inside in an air-conditioned environment, such as the slurry room. In use, Citru-Etch II Emulsion functions as a typical nonionic detergent to effect removal of silicone deposits from wax pattern surfaces. Wax patterns on removal from a CitruEtch II Emulsion bath tend to retain a "hydrophobic" surface that assures good drainage. The surface, however, is also "oleophilic" and strongly couples to water based baths such as rinse, prewet, or refractory slurry that contains a suitable surfactant level. Price Range: 400 - 450 INR Minimum Quantity: 30 Kg Product Type: Wax Pattern Cleaner Appearance: White Form: Liquid Ph Level: 6.5 to 8.0 Density: @ 20o C 0.90 - 1.00 g/ml FOB: Greater Noida (India) Payment Terms: Cash In Advance (CIA)
We manufacture and export a premium quality range of Low Aromatic White Spirit (LAWS). These spirits are acknowledged as the paint thinner, demanded in paper, pring, adhesive and chemical industry as a common organic solvent in painting or decorating. We process this spirit under the supervision of our skilled professionals by utilizing superior quality materials at our well equipped production unit. Further, this LOW AROMATIC WHITE SPIRIT (LAWS) can be easily availed by our precious clients in various packaging options at affordable price. Features: Long shelf life Free from adulteration Properly packed
a. Name of product Fuel Oil (Mazut) – CST180, CST280, CST380 b. Price of product Negotiable c. Product origin Iran, Iraq, Russia d. Key Specifications/Special Features Mazut is a heavy, low quality fuel oil which is the residue from distillation of gasoline, ligroin, kerosene, and diesel oil fractions from petroleum. It comprises all residual fuel oils, including those obtained by blending. Its kinematic viscosity is above 10 cSt at 80°C. The flash point is always above 50°C and the density is always higher than 0.90 kg/l. It may be used as boiler fuel oil, in the preparation of distillate and residual lubricating oils, in cracking or hydrogenation processes for the manufacture of motor fuel (gasoline or diesel oil), and in the production of bitumen and coke, depending on its chemical composition and properties. e. Harmonization System (HS) Code :27101950 f. Minimum Order Size : 100 MT g. Packaging details Bulk, Barrel, Tanker
White Spirit is a petroleum distillate used as a paint thinner and mild solvent. In industry, mineral spirits are used for cleaning and degreasing machine tools and parts, and in conjunction with cutting oil as a thread cutting and reaming lubricant. Mineral spirits are an inexpensive petroleum-based replacement for the vegetable-based turpentine. It is commonly used as a paint thinner for oil-based paint and cleaning brushes, and as an organic solvent in other applications. a. Name of product White Spirit (Solvent 402) b. Price of product 650$ / MT FOB c. Product origin Iran, Kuwait, UAE, Oman d. Key Specifications/Special Features White Spirit is a petroleum distillate used as a paint thinner and mild solvent. In industry, mineral spirits are used for cleaning and degreasing machine tools and parts, and in conjunction with cutting oil as a thread cutting and reaming lubricant. Mineral spirits are an inexpensive petroleum-based replacement for the vegetable-based turpentine. It is commonly used as a paint thinner for oil-based paint and cleaning brushes, and as an organic solvent in other applications. e. Harmonization System (HS) Code :27101990 f. Minimum Order Size : 100 MT g. Packaging details Flexi Tank, drums or Iso Tanks
Home Stowed Fuel
Home Stowed Fuel
Little Sulphurously Fuel Oil For Firebox
Kerosene Lighting Ko-20 Brand
SN-80 SN-180 SN-350 SN-600 SN-1200
Fuel For Reactive Engines Ts-1
WE ARE READY TO SUPPLY IN FOB ROTTERDAM/HOUSTON CI DIP PAY JET A1 - JP54 - VIRGIN FUEL OIL D6 - EN590 - No upfront fees - Seller will pay Buyer's tank farm lease for 3 days - Dip test after injecting to Buyer's tank farm TRANSACTION PROCEDURES FOB CI DIP & PAY 1) Buyer issues ICPO. 2) Seller issues Commercial Invoice (CI). Buyer signs and returns to Seller with his TSA. Seller verifies Buyer's TANK FARM and makes 3 days tank lease payment to the Buyer's tank farm for the Injection Process. 3) Buyer pays his Tank Farm Company for 2 days tank storage costs, (totaling 5 day TSR) after his Tank Farm Company has received the payment from Seller's Company 3 days cost. 4) Seller injects into Buyer's tank and issues ATV and Unconditional DTA. 5) Buyer conducts Dip Test and makes the payment for the total value of product injected into the tanks through the means of MT103-TT. 6) Seller pays all intermediaries involved in the transaction, and subsequently monthly shipment continues as per terms and conditions of the sales and purchase agreement contract between Buyer and Seller.
We offer diesel fuel D2 (gas oil), D6, jp54, LNG, LPG, natural gas and their derivatives. Miscellaneous aviation fuel and more. Sugar white crystalline beet sugar category TS 2, in woven polypropylene bags with polyethylene liner with a nominal weight of 50 kg GOST 33222-2015 All communication only after LOI (application) and RWA. There will be questions, I will answer. Terms of Payment 1. Buyer shall furnish Supplier with BG or SBLC meeting the following requirements: Type of BG or SBLC: Financial instrument to be held by the Supplier as security for payment. Confirmed by Top 50 Prime World Bank, BG or SBLC amount: the amount equal to the total price of the Product to be delivered to Buyer within the 2-month period under the Agreement, Validity period: 365+30 days, Beneficiary: Supplier, The Financial instrument can be issued on behalf of the Buyer by the third party. 2. BG or SBLC shall be issued in accordance with the following procedure: The Buyers Bank issues the letter RWA as per the format in Appendix No. 4 (from the bank email address) to the Supplier e-mail. The Supplier reserves the volume of the Product for the Buyer. The Bank of the Buyer issues the letter (Pre-Advice) (MT-799) to the Bank of the Supplier about the readiness to issue the Financial instrument BG/SBLC (MT-760). The Suppliers bank within 5 (five) bank days, after reception of the letter (Pre-Advice) about readiness of release of the Financial instrument (BG/SBLC), sends to the Buyer�¢??s bank the set of documents that form Proof of Product Capability (POPC); Within 5 (Five) banking days from the receipt of the POPC, the Buyer's Bank issues BG/SBLC MT-760 to the Bank of the Supplier (Beneficiary); Is not later than the 5 (Five) banking days from the moment of the nomination BG/SBLC of the matched size, salesman lets out in the address of buyer 2% as the guarantee of the timely delivery of Product (MT-760). 3. BG or SBLC shall provide for payment(s) for the shipped Product, as well as payment of penalties and costs to be made by Buyer under Clause 12 of the Agreement. 4. Under the terms of BG/SBLC Supplier shall be entitled to draw payments for partial shipments. 5. Each payment under SWIFT MT-103 for the shipped batch of the Product shall be made to Supplier in within 5 (Five) banking days.
