Main Parameter Process Ability: 30-500 m 3 /h Outlet Pressure: 1.6 -6.4 MPa Applicable Gas-Liquid Ratio: 1:90 Applicable Temperature: -20-250â?? (gas-Liquid filtration, gas-Liquid separation, pressurization, sewage discharge and other functions are integrated.) Closed loop automatic control Size: 7500�?2400-9000�?2400mm � Applications 1. Crude oil 2. Gas-bearing crude oil 3. Transportation and mixed transportation of oily sewage, etc.. � Water Jacket Heating Furnace The skid-mounted water jacket heating furnace integrates the water jacket heating furnace body, burner system, chimney and its accessories, the fuel pressure regulating system, pressure regulating control valve of the heated medium, temperature and pressure measuring device, sampling port, safety valve, operating platform escalator, piping system valve instrument and the automatic control system into one, which is convenient for on-site installation and easy operation and maintenance. The automatic control system of the water jacket heating furnace can be divided into two control modes: burner local control and station control room control, which can be applied to various types of water jacket heating furnaces. It is mainly composed of pneumatic control valve, gas emergency cut-off valve, water bath temperature controller, extinguishing automatic protector and other components.which can change according to the outlet temperature requirement of the heated medium and the change of temperature and flow into the reheating furnace. In the absence of external power supply, the burner output power can be automatically adjusted to ensure that the temperature of the heated medium meets the process requirements. When the water heating furnace is in abnormal conditions, and master fire is flameout, the control system can automatically cut off the fuel gas source and protect the the safety of the furnace body. At the top of the water heating furnace equipped with an air pipe connecting with atmosphere, which makes the heating furnace operate under normal pressure in any circumstances, ensures the safety of the furnace body
Main Parameter Process Ability: 30-500 m 3 /h Outlet Pressure: 1.6 -6.4 MPa Applicable Gas-Liquid Ratio: 1:90 Applicable Temperature: -20-250 (gas-Liquid filtration, gas-Liquid separation, pressurization, sewage discharge and other functions are integrated.) Closed loop automatic control Size: 7500 2400-9000 2400mm Applications 1. Crude oil 2. Gas-bearing crude oil 3. Transportation and mixed transportation of oily sewage, etc.. Water Jacket Heating Furnace The skid-mounted water jacket heating furnace integrates the water jacket heating furnace body, burner system, chimney and its accessories, the fuel pressure regulating system, pressure regulating control valve of the heated medium, temperature and pressure measuring device, sampling port, safety valve, operating platform escalator, piping system valve instrument and the automatic control system into one, which is convenient for on-site installation and easy operation and maintenance. The automatic control system of the water jacket heating furnace can be divided into two control modes: burner local control and station control room control, which can be applied to various types of water jacket heating furnaces. It is mainly composed of pneumatic control valve, gas emergency cut-off valve, water bath temperature controller, extinguishing automatic protector and other components.which can change according to the outlet temperature requirement of the heated medium and the change of temperature and flow into the reheating furnace. In the absence of external power supply, the burner output power can be automatically adjusted to ensure that the temperature of the heated medium meets the process requirements. When the water heating furnace is in abnormal conditions, and master fire is flameout, the control system can automatically cut off the fuel gas source and protect the the safety of the furnace body. At the top of the water heating furnace equipped with an air pipe connecting with atmosphere, which makes the heating furnace operate under normal pressure in any circumstances, ensures the safety of the furnace body
Product Description The crude oil electric heating pressurization skid is based on the oil and gas gathering and transportation pressurization skid, combined with the characteristics of oil exploitation, it integrates multiple production facilities such as filter, separation buffer tank, heating furnace and external transmission pump in the traditional oil station boosting station. It adopts electric heating and supporting intelligent control system, with filtering, heating, separation, buffering and pressurization functions, and can realize remote terminal control and unattended operation on site.
Please contact us for more informations
The Oil Filtration Plant shall be designed for high vacuum and low temperature of oil for achieving required results. The Oil Filtration Plant shall be Mobile, mounted on an under carriage with Four Pneumatic wheels. Automatic brakes and towing arrangement shall be provided. The Plant shall be weather proofed and shall be suitable for outdoor use. The casing shall be provided with doors of SS 304 Sheets, hinged on fabricated Framework, Angles and Channels to have access to the operational controls and inspection windows etc. The equipment shall be enclosed and protected against climatic conditions. The Screw Jacks for relieving pressure on wheels at stationary conditions shall be provided. All components shall have adequate strength and rigidity to withstand normal conditions of handling transport and usage and shall be free from edges or corners to avoid injury to Operating Personnel in normal conditions of use. The design of the Plant shall be such that if required the part/s can easily be replaced.
NSH GED Vacuum Distillation System is able to regenerate a variety of waste oil: engine oil, transformer oil,motor oil, car oil, lubrication oil, gear oil, hydraulic oil, washing oil, Ship marine oil, etc. Specialized not only one single type of oil, but also mixed waste/used black dirty oil. After the distillation treatment, vacuum treatment and regeneration treatment through GED system, you can get high quality diesel, and a small amount of gasoline
NSH Vacuum Insulating Oil Purifier, use for purification and treatment of insulating oils, oil filling and drying of electrical equipment, such as transformers. This series is able to purify trace water, gas and particulate matters effectively. It is divided into three models for different practical usage: â?¢VF: Single-stage Vacuum Transformer Oil Purifier â?¢VFD: Double-stage Vacuum Transformer Oil Purifier â?¢VFD-R: Double-stage Vacuum oil Purification and Regeneration Plant VFD-A: Advanced Full-automatic Vacuum Insulation Oil Purifier Tailored: Tailored Vacuum Oil Solutions
This equipment is a multi-source high-vacuum evaporation coating instrument. The equipment adopts a front-opening vacuum chamber design. The chamber has a large space and strong expandability, which can meet the evaporation coating of multiple types of large-size samples. The chamber has an upper sample stage inside, and the clamping or clamping type sample mounting parts can be selected according to the user's sample style. The sample table can be rotated, heated and raised and lowered, and all operations are integrated and controlled through the touch screen. The vacuum pump set of the equipment is a two-stage vacuum system, which is composed of a dual stage rotary vane vacuum pump and a turbo molecular pump. It can provide a clean and oil-free high vacuum environment for the vacuum coating test; the vacuum system contains a complete pneumatic valve system, and the user can One-touch operation through the touch screen realizes vacuuming, non-stop load and unload sample, complete shutdown and other operations. The equipment has two sets of evaporation sources. It adopts a tungsten boat evaporation source and water-cooled copper electrodes. It can support a maximum current of 300A and a heating temperature of up to 3000â??. It can realize the evaporation of various refractory metals. This equipment adopts an integrated design, and the chamber and the electric control part are separated left and right, which realizes the separation of water and electricity, and effectively guarantees the safety of users. The electric control part adopts the design of the combination of touch screen and button panel. The vacuum system, sample table and other auxiliary functions are operated by the touch screen with one button. The evaporation and the film thickness control are operated independently by the panel, which is as convenient for users as possible while avoiding the possibility of wrong operation. The equipment is well-designed and has excellent performance, and it is an indispensable choice for laboratory high-precision evaporation coating test.
Capacity 5 tonnes per day i.e. 4 batches of 1250 kg. each 1. All the main vessels i.e. two neutralizers, one bleacher and one deodourizer are properly arranged on the first floor of the steel structure. So all these vessels are hanging on the steel strucutre. Just below the two neutralizers, two soap pans are resting on the ground floor in which soap stock is collected. There is a steam pipe arrangement in the soap pans also. 2. Steel structure has size of 14ft. x 14ft. (i.e. 4.25mtr. x 4.25mtr). First floor is 9ft. above the ground level. There are 8 coloumns of double chanel which supports the entire steel structure. It has proper staircase and railing on all the sides of steel structure at the first floor and also on staircase. Two filter presses are also accomodated on the first floor of the steel structure. 3. Two oil tanks i.e. raw oil tank and bleached oil tank are accomodated under the strucutre on the ground floor. Then cooler, thermic fluid boiler, two steam generators, vacuum pump, water pumps, oil pumps and refined oil tank are arranged on the ground floor around the steel structure i.e. outside the square of 14ft. x 14ft. of the steel structure. So total space occupied is about 30ft. * 30ft. (9mtr. x 9mtr.). 4. 40ft. tower is erected just near the deodourizer and its complete structure is supported from the ground floor and also it is attached with the refinery structure. Berometric condenser is arranged at 40ft. height to create proper vacuum. 5. All types of piplines are interconnected as per the requirement of the refinery i.e. oil pipelines (yellow colour), vacuum pipelines (blue colour), steam pipelines (black colour), water pipelines (white colour), thermic fluid pipelines (red colour). At all appropriate places, proper valves are provided in the pipelines. 6. Neutralizer is provided with thermic fluid coil for heating the oil. 7. Bleacher is provided with double pipe coil. One is for thermic fluid and another is for cooling water. 8. Deodourizer is provided with double pipe coil i.e. in both the coils, thermic fluid is circulated. Steam is ejected from the stainless nozzles provided on the steam pipe cross supported at the bottom. 9. Cooler is provided with double pipe coil. Both for cooling water. 10. In every vessel temperature guage is provided. Vacuum guage is provided on deodourizer, bleacher and cooler. 11. Neutralizer is open on the top having conical bottom. 12. Bleacher has dished ends on both the sides. Similarly deodourizer has dished ends on both the sides. Cooler has also dished ends on both the sides. 13. Specification of Refinery with fractionation Process 14. There will be chilling plant for fractionation process which will include shell and tube chiller, compressor, motor, pump, condenser, control panel box etc. 15. Crystallizing unit which is similar to neutralizer complete with chilling coil. 16. Filter press for separation of palm olein and palm sterene.
Model number LF-16L-30T-1 Specifications 75*57*112mm Food grade MSAP bioactive molecular scale inhibition technology, highly effective scale inhibition, protect the water heater from scaling, improve thermal efficiency, Extend the life of the water heater; 17L / min super-large water consumption, meet the domestic water heater, boiler water consumption;40μm fine filter, made of SS316L stainless steel, filtering impurities such as suspended matter and particles; The filter element is more durable, the amount of clean water can reach 30 tons, and the replacement is convenient;The bottle body is made of transparent modified secret formula material, and the bottle cap is made of healthy and environmentally friendly copper, which is strong and explosion-proof;
Features and Benefits 1 Adjustable G force up to 8.0, drying solids discharge more efficient 2 Mechanical shaker deck angle adjustable while working 3 Heat treatment on complete shaker deck for High G force operation. 4 Patent tighten rubber sealing for shaker deck and screen, easy replacement 5 Famous Brand Vibration Motors : Martin or Oli 6 International brand Siemens or Schneider 7 Low Height Hopper more easier for cuttings Feeder
Description: Vacuum Degasser is adapted to get rid of various cut-in gases in the drilling fluids. Vacuum degasser is very important for returning mud gravity, stabilizing mud viscosity and reducing drilling cost. Therefore, it works as one type mud cleaning equipment. As it is placed after the shale shaker, so we call it second stage mud cleaning equipment in mud recycling system. At the same time vacuum degasser can be used as a heavy-power agitator.
Description: Shale Shaker is the first stage solids control equipment in drilling fluids recycling system; it is also the most important equipment. To a large extent, the performance of shale shaker decides the working efficiencies of whole solids control system. Besides single shale shaker, Lake Petro also could offer tandem shakers and triplicate shakers on single skid according to customers requirements and also the connecting manifold and mud distributor. Lake Petro provides the most popular type Linear Motion shale shaker.
Description: Lake make High quality replacement shaker screens for MI Swaco Shale Shaker, Nov Shale Shaker, Brandt Shale Shaker with competitive price as well as global distribution.
Bucking Unit Is A Kind Of The Threaded Connection Handing Unit, Can Be Used In Downhole Pump, Downhole Tools, Tubing , Casing, And Negotiation Thread Connection Of Manufacturing Assembly And Maintenance.
Description: A rotary table is a mechanical device on a drilling rig that provides clockwise (as viewed from above) rotational force to the drill string to facilitate the process of drilling a borehole.
Description: Hydraulic Screwing Machine is mainly used in the production of Tubing, Casing and Couplings. The unit is normally used to make-up/break-out couplings of casing, tubing and pipes and it supports different type of thread connection.
Description: Weight indicator suitable for drilling and geological exploration drilling rig or workover process instructions and record the drilling hanging weight and WOB change, it can help drillers to master the working parameters and judge the working state of drilling tools. Weight indicator by the deadline anchor, weight secondary table (weight indicator and recorder).The instruments work environment temperature: -40~50 Liuda Li
Description: Gas Separator (Poor Boy Degasser) is engineered specifically for onshore drilling operations. The working principle of the poor boy degasser is simple. The drilling mud with gas mixture in the bore hole is transferred by mud return lines to the inlet of the mud gas separator, allowing it to impinge on a series of baffles which separates gas from drilling mud.
Application & Function: HOPU Series ZYD oil regeneration system is equipped with decolorization system to improve oil color. It is mainly used to remove trace water,gas and other contaminants such as solid particles in the the waste oil, widely used to purify various unqualified electrical insulating liquids such as transformer oil, capacitor oil, switch oil and silicone fluids, etc. After process, oil puncture voltage(breakdown voltage BDV) can be greatly increased, the coefficient of loss tan delta can be significantly improved, and the oil dielectric strength can be maintained. Feature: 1.Higher than the national standard, it can increase oil puncture voltage by at least 35KV at a time, greatly reduce the oil processing period, due to reduced general oil repeatedly heating oil quality aging filtration lead hazards. 2.High vacuum pressure and high flow rate: Absorption speed power=333L/s to meet with the requirements in the installation and maintenance of transformers vacuumize. It is suitable for degas, dewater of transformer oil. 3.Adopt the nano-molecular material filtration and three-dimensional flash distillation technology to remove water, gas and impurities of the transformer oil effectively, to improve the voltage-withstand value and the quality of oil. 4 .Carbon fiber infrared heating system, it can remove all the ethyne from the oil. 5. Adopt VK technology, it can remove the water effectively, such as the dissolve water. 6. Especially applied to vacuum filling oil and drying for power transmission equipments which power is over 110KV. Please contact for more technical details and latest price: Michael Hua is at your service Email 1: mh@hopufiltration.com Email 2: oilfilter@aliyun.com QQ:330713880 Mob: 0086 13896055638 Tel: +86 23 62538144 Fax:+ 86 23 62538144-3 Website: www.hopufiltration.com Branch 1: www.oilpurifiertech.com Branch 2: www.oilfiltration123.com
