Carbon fiber water fed pole, we can provide 30%cf, 60%cf, 100%cf, and hmcf, it depends on your demands. The length, we have 18ft~84ft, but we can customize the products according to your request. About the diameter, the smallest inner diameter is 20.5mm, thickness is about 1.4~1.5mm. Surface finish, we can provide natural, 3k weave. We have b series(horizontal clamp) or x series(vertical clamp) for you to choose. This model is x series. At present, we have red clamp, black clamp. The material of clamp is nylon(pa66). We use roll-wrapped, it’s more durable. As water fed pole, we can provide brush, adaptor, hose, euro tip, etc. It’s convenient for you to cleaning the windows. If you have any doubts, you can contact us at all times.
carbon fiber roll wrapped tube, the technology is roll-wrapped, so it's more durable than pultrusion. Surface finish, we can provide natural, 3k weave, glossy, matte, etc. Diameter, 500mm below, but it can be customized according to the order. About the length, we also can manufacture it according to your request. And it can be used for sports, aircraft, etc. If you have any doubts, you can contact us at all times.
Carbon fiber antenna mast, the length we have 18ft~84ft, but we can customize the products according to your request. About the diameter, the smallest inner diameter is 20.5mm, thickness is about 1.4~1.5mm. Surface finish is natural, 3k plain/twill, etc, it depends on your actural situation. We have B series(horizontal clamp) or X series(vertical clamp) for you to choose. This model is X series. The material is Nylon(PA66). The color that we have red and black. Application: Flag pole, radio mast, etc.
Water fed pole is a new and durable product of Weihai Xinbo Composite Products Co., ltd. It consists of telescopic pole, brush, adaptor, hose. Telescopic pole, we have B series(horizontal clamp) and X series (vertical clamp). Our telescopic pole is hollow tubes which can allow the water hose go through it. About normal size, we have 18~84 ft, we also can customize the products according to your request. Brush, it is connected with water hose and adaptor. Adaptor, it is used to connect water fed pole and brush. And the angle, it can be adjusted according to your requirements. Hose, we have black and green. It’s durable, wearable, anti-freeze crack. After assembly, you can use it to clean the windows, it’s very convenient and easy to operate. If you have any other questions, please feel free to contact with us.
Custom carbon composites products, we can adapt different technologies, for example, roll-wrapped, pultrusion, mold compression, pull winding, etc. It can be used according to your request. At present, surface finish, we have 3k weave, UD, etc, it can be customized.About the diameter, length, because it belongs to customized product, you can tell your request. About MOQ, or other data, you can ask our technical staff for special specifications. If you have any other doubts, please contact us at all times.
3k carbon fiber sheet, we have plain weave and twill weave. About the surface finish, we can produce glossy or matte. At present, we have 600*600mm, we also can customize the product according to your request. About thickness, it’s usually 0.3~20mm, but if you have other request, we also can manufacture it. MOQ is 10pcs, if you can order more, we can offer you a better price. All in all, the more quantity, the cheaper. If you have any questions, please don’t hesitate to contact us. We’ll try our best to serve you
Carbon fiber tube is made from 100% carbon fiber, many outstanding characteristics such as high toughness, high strength, flame resistant, heat resistant and light weight, it is widely-used in various fields. According to customer's request, we can supply customized carbon fiber tube.
Our factory has high precision cnc cutting machines, professional engineers.We have more than 10 cnc machines, drilling hole, cutting, counter sunk.Please offer us cad dxf or dwg file or real product for production. Carbon fiber cnc cutting parts application: 1. aerospace, rc model parts, helicopters, model drone , uavs; 2. decoration parts for car and jewelry; 3. manufacture fixtures and tooling; 4. industrial automation and robotics; 5. sports equipment; 6. musical instruments; 7. scientific apparatus; 8. medical device; 9. others.
1.Good tenacity; 2.High strength; 3.Light weight; 4.Strong toughness; 5.Nice looking;stylish; 6.Variety of colors for choice. 7.Fashion mix; 8.Sunshading; 9.Uv-blocking
Carbon fiber square tube description: 1.Pure carbon, high strength, light weight, nice surface; 2.Raw material :imported from taiwan tairyeil or japan toray's carbon fiber fabric; 3.Outside 3k +inside ud carbon.
Carbon fiber key case product description: 1.Real carbon fiber key holder, carbon fiber key bag; 2.Light weight, modern, high-tech look, noble; 3.Size of 100*55*20mm; 4.Suitable for all car keys.
Product description: 1.Weave :3k plain /twill in matte/glossy sureface , we can do 1k, 1.5k, 6k , 12k. 2.Lay up :both sides 3k +middle ud carbon. 3.Size: 400*500mm, can do 500*500mm, 500*600mm, 500*1200mm, 600*1000mm, 1000*1200mm. 3.Thickness: 0.2-60mm, 0.2-0.5-0.6-0.8-1.0-1.2-1.5-2.0-2.5-3.0-3.5-4.0-4.5-5-6----60mm. 4.Weight: 200g/sqm -360g/sqm. 5. Fiber count: 5*5/cm. 6.Color: black, silver, yellow, red , blue, some mix color 7.Material: 100% pure carbon fiber or carbon wth fiberglass or as per customer request
We offer from Low grade Activated Carbon to High grade Activated Carbon derived from Coal, wood, and Coconut shell as per the requirements. We currently export 300-400 MT of Activated Carbon world wide on monthly basis. Sea worthy.
Activated Carbon.
we produce carbon black from recycled tires jumbo bags 1 ton
Moisture(weight) Ash Particle size Performance of decolouring 20kg/bag
En590 10 ppm, jet a1, d6, lng and crude oil..
REFINERY TANK TO VESSEL&TANK/DIP & PAY PROCEDURE 1. Buyer issues official ICPO addressed to the refinery or representative. 2. Seller issues Commercial Invoice (CI), buyer signs and returns the signed invoice to the seller. 3. Seller issues to the buyer the partial proof of product documents: - ATSC - Authority to sell and collect. - DTA - Dip Test Authorization - PRODUCT PASSPORT - Product analysis report from a renowned inspection company. - STATEMENT OF PRODUCT AVAILABILITY DULY SIGNED AND NOTARIZED BY THE APPROPRIATE AUTHORITIES. - COMMITMENT LETTER TO SUPPLY - ATV �¢?? Authority to verify the existence of product via email or phone call. 4. Buyer sends Dip Test Authorization to the seller�¢??s tank farm for endorsement extends seller�¢??s tank and receives full GPS coordinates of the tanks, Hub Numbers, terminal access permit and dip test is conducted immediately with buyer�¢??s team to obtain fresh SGS report. 5. After a successful Dip Test in Seller�¢??s tanks, Buyer takes over seller�¢??s tank or Seller injects into buyer�¢??s vessel / Tank and buyer conducts its DIP TEST Inspection for Q & Q of the Petroleum Products aboard vessel / Tank. 6. Buyer after a successful Q &Q Dip test on the product, the buyer makes the payment for the total value of the product injected into the tanks through the means of MTI03 - TT. 7. Upon seller receives the payment for the product from the buyer, the seller issues to the buyer the Title ownership of the product and all exporting documents of the Product. 8. The seller pays all intermediaries involved in the transaction.
REFINERY TANK TO VESSEL&TANK/DIP & PAY PROCEDURE 1. Buyer issues official ICPO addressed to the refinery or representative. 2. Seller issues Commercial Invoice (CI), buyer signs and returns the signed invoice to the seller. 3. Seller issues to the buyer the partial proof of product documents: - ATSC - Authority to sell and collect. - DTA - Dip Test Authorization - PRODUCT PASSPORT - Product analysis report from a renowned inspection company. - STATEMENT OF PRODUCT AVAILABILITY DULY SIGNED AND NOTARIZED BY THE APPROPRIATE AUTHORITIES. - COMMITMENT LETTER TO SUPPLY - ATV �¢?? Authority to verify the existence of product via email or phone call. 4. Buyer sends Dip Test Authorization to the seller�¢??s tank farm for endorsement extends seller�¢??s tank and receives full GPS coordinates of the tanks, Hub Numbers, terminal access permit and dip test is conducted immediately with buyer�¢??s team to obtain fresh SGS report. 5. After a successful Dip Test in Seller�¢??s tanks, Buyer takes over seller�¢??s tank or Seller injects into buyer�¢??s vessel / Tank and buyer conducts its DIP TEST Inspection for Q & Q of the Petroleum Products aboard vessel / Tank. 6. Buyer after a successful Q &Q Dip test on the product, the buyer makes the payment for the total value of the product injected into the tanks through the means of MTI03 - TT. 7. Upon seller receives the payment for the product from the buyer, the seller issues to the buyer the Title ownership of the product and all exporting documents of the Product. 8. The seller pays all intermediaries involved in the transaction.
FOB Jurong Jet fuel A1 Price 76 - 100 $ depend the procedure Contract signed direct buyer to refinery. Contact us for the procedure and more informations.
