Petroleum By Products Suppliers and Manufacturers

Specification: Carbon (C): 10.0% max; Moisture: 2.9% max; Loss on ignition: 13.4% max; Iron oxide (FeO3): 0.4%; Calcium oxide (CaO): 0.6%; Sodium oxide (Na2O): 0.2%; Potassium oxide (K2O): 3.5%; Sulfur trioxide (SO3): 0.8%; Silicon dioxide (SiO2): 70.2%; Aluminum oxide (Al2O3): 0.1%; Magnesium oxide (MgO): 0.4%; Appearance density after compaction: 0.24%.

Granular activated carbons are made from rigid raw materials, giving the necessary hardness to avoid excessive losses due to attrition and handling. They present large internal surface of pore structure, ensuring high adsorption power in specific purposes and uses. They are used in fixed or moving beds as columns where the liquid or gas passes through and gets purified. They can be used in liquid or gas phase continous adsorption process and offer unusual economy in cases where carbon regeneration is favorable. In liquid phase applications they remove colloids and organic substances that give undesirable odors, colors and taste to the products. They are efficiently used for water dechlorination in processes which require super chlorination as well as the removal of organic substances from the water. In vapor phase application they participate in the solvent recovery, adsorption of colors, purification of carbon di-oxide and catalyst support. They are also used to reduce the COD and BOD in effluent waste water. Granular activated carbon is produced from coconut shell charcoal by the process of steam activation. The coconut shell charcoal is fed into the rotary kiln and activated by steam at high temperatures resulting in the evaporation of impurities and opening up of pores on the surface. The resultant big particles are then crushed and sieved to get the desired particle size. Our main grades of granular activated carbon are given as under. We can customize the iodine value as well as the particle size according to your requirements

Our Powder activated carbon is manufactured using pure pine wood which is an excellent base for manufacturing activated carbons with good adsorption power. The steam activated process is done by activating the charcoal in a rotary kiln by heating at high temperatures by steam. The activated carbon that comes out from the kiln is called unwashed activated carbon. These unwashed activated carbon has higher ash and iron content. This is reduced by washing the unwashed activated carbon with acid (HCl / H2SO4) and purified water. This results in reduction of ash content to as low as 1% and iron as low as 50 ppm. The gradation of different qualities of activated carbon is done on the basis of Methylene blue value and iodine value. The iodine value is a better test as the particle size of iodine molecule is small enough to penetrate the smallest of pores. We can relate the iodine value of activated carbon directly to its surface area because of the above fact.

Granular activated carbons are made from rigid raw materials, giving the necessary hardness to avoid excessive losses due to attrition and handling. They present large internal surface of pore structure, ensuring high adsorption power in specific purposes and uses. They are used in fixed or moving beds as columns where the liquid or gas passes through and gets purified. They can be used in liquid or gas phase continous adsorption process and offer unusual economy in cases where carbon regeneration is favorable. In liquid phase applications they remove colloids and organic substances that give undesirable odors, colors and taste to the products. They are efficiently used for water dechlorination in processes which require super chlorination as well as the removal of organic substances from the water. In vapor phase application they participate in the solvent recovery, adsorption of colors, purification of carbon di-oxide and catalyst support. They are also used to reduce the COD and BOD in effluent waste water. Granular activated carbon is produced from coconut shell charcoal by the process of steam activation. The coconut shell charcoal is fed into the rotary kiln and activated by steam at high temperatures resulting in the evaporation of impurities and opening up of pores on the surface. The resultant big particles are then crushed and sieved to get the desired particle size. Our main grades of granular activated carbon are given as under. We can customize the iodine value as well as the particle size according to your requirements

Wood Based Powder Activated Carbon is used for decolorizing in sugar liquors, juices,soybean and food industries. Wood powder activated carbon is non-toxic, without taste and it has the appearance of a fine black powder. Mb Value : 140 to 320 Ash:7 to 12%

Coal based activated carbon originates from coal that has undergone a steam activation process Coal based carbon has mainly mesopores and macropores and is very popular in gas phase purification portable water purification wastewater purification and aquariumpond water purification applications The carbonaceous product of wood Applications Gas phase purification Water purification system

Coconut shell activated carbon is derived from coconut shells. It has a very high hardness and is more abrasion resistant than any other type. It is a totally natural, environmentally friendly product that has a very small carbon foot print. The carbonaceous product of coconut. Applications â?? Portable water purification Wastewater purification Gold absorption from gold solution Medical use

CARBON CATHODE BLOCK AVAILABLE POL- JEBAL ALI QTY - 5000 MT PER MONTH FC- 85% LOADING PER CONTAINER - 25 MT SIZE - 1- 40MM - 80 MM 2- 150MM -500 MM

Dear Buyers, We are dealing with supplying of Carbon Anode Blocks (FC-95%) from GCC countries in Bulk Quantity.

Carbon Anode Scrap for Sale Qty - 50000 MT POL - Saudi, Bahrain Payment Terms - 100% Advance Loading period - Within 7 days after order confirmation. Minimum order Quantity - 10 Containers Fixed Carbon - 95-98% Sizw - 100-600 mm