JP54 powers gas turbine aircraft engines. Jet A and A-1 have specifications that can be used in fuel worldwide. Jet B is used in cold weather elements. Commonly a number of different mixtures make up jet fuel and this relates to flash points and how the carbon numbers are distributed.
The name bunker fuel is thought to come from the storage area within a boat or ship where fuel is stored, known as the fuel bunker. Maritime vessels use bunker fuel to power their motors, but depending on your vessel, it might not be regular white diesel. Some watercraft indeed use diesel and other, larger vessels marine gas oil (which is considered a low sulfur fuel oil or LSFO) as their source of bunker fuel.
Light Cycle Oil (LCO) is a diesel boiling range product from Fluid Catalytic Cracking Units (FCCUs). ... Light Cycle Oil is the diesel boiling range material, which is produced in addition to gas and petrol in the FCCU. LCO is treated in the diesel hydrotreater (DHT) unit to produce low sulphur environment friendly diesel.
Petcoke is the coke that, in particular, derives from a final cracking processâ??a thermo-based chemical engineering process that splits long chain hydrocarbons of petroleum into shorter chainsâ??that takes place in units termed coker units. (Other types of coke are derived from coal.)
300,000 to 500,000 metric tons
500,000 to 1,000,000 metric tons
As Certificated Mandate We Have All This Petroleum Products Avaible For The Best Price. Directly From The Refinery With
FOB/CIF.DLC/SBLC NON TRANSFERBLE.USD/YNC RMB.
TRANSACTION PROCEDURES CIF (BANK GUARANTEE BASIS) Payment at the discharging port.
Orgin: NON Russian and Russian.
PETCOKE (Sulpher from 1% to 6%)
Minimum Quantity: 50,000 MT
LIQUIDIFIED NATURAL GAS (LNG)
Minimum Quantity: 20,000 MT
Application:It is used as color concentrate,Dispersion Agents,Adhesives,Inks and Paints,Coating,Cable Filling Compound,Lubricants agent and Mold release agent and so on.
Features and Benefits:
1.Good hardness
2.Good lubricity
3.Good chemical stability
Properties Unit Test Method Specifications
Melting point C ASTM E 28 107 3
Density g/cc 23 C ASTM D 1505 0.93
Hardness d-mm 25 C ASTM D 5 5
Acid value Mg KOH/g ASTM D 1386 10 1
Appearance Yellowish powder
Application:As a lubricant, film remover and phase solvent for rubber and plastic processing, due to its high melting point and low viscosity, it promotes good resin fluidity, relatively reduces the power consumption of resin mixing, reduces the adhesion between resin and mold, is easy to remove film, and plays the role of internal and external lubrication.
Features and Benefits:
1.Good thermal stability
2.Good lubricity
3.Good dispersion
Properties Unit Test Method Specifications
Mettler drop point C ASTM D3954 130
Density g/cc ASTM D1505 0.99
Hardness d-mm ASTM D-5
Application:It is widely used in the production of PE and PVC cables, PVC profiles and pipes. In the plastic processing industry, the internal and external lubrication of PVC is relatively balanced; The lubricity of oxidized polyethylene wax in the hard, transparent and opaque PVC formulation is better than that of other lubricants.
Features and Benefits:
1.Good hardness
2.Good thermal stability
3.Good lubricity
Properties Unit Test Method Specifications
Mettler drop point C ASTM D3954 128
Density g/cc ASTM D1505 0.99
Hardness d-mm ASTM D-5
Application:It is used as color concentrate,Dispersion Agents,Adhesives,Inks and Paints,Coating,Cable Filling Compound,Lubricants agent and Mold release agent and so on.
Features and Benefits:
1.Low viscosity
2.Good thermal stability
3.Good dispersion
Properties Unit Test Method Specifications
Melting point C ASTM E 28 110 3
Density g/cm3 23 C ASTM D 1505 0.93
Hardness d-mm 25C ASTM D 5 5
Acid value Mg KOH/g ASTM D 1386 15 1
Appearance Yellowish powder
Application:It is used as dispersion agents and lubricant for pigments or fillers such as thick color master-batch, polypropylene master-batch, additive master-batch and filling master-batch.
Features and Benefits:
1.Low viscosity
2.High melting point
3.Good hardness
Properties Unit Test Method Specifications
Mettler drop point C ASTM D3954 102
Density g/cc ASTM D1505 0.99
Hardness d-mm ASTM D-5 5
Acid No. Mg KOH/g - 12
Viscosity mm2/s at 150 C Brookfield 5000
Particle size mesh ASTM D6913-2004 20
Paraffin is mainly composed of solid alkane, odorless and tasteless. It is a white or light yellow translucent solid. Due to its high oil content, it is mainly used to make matches, fiberboard, canvas, etc. When polyolefin additives are added to paraffin wax, its melting point increases and its adhesion and flexibility increase. It is widely used in moisture-proof and waterproof packaging paper, paperboard, surface coating of some textiles and candle production.
Properties Unit Test Method Results
Melting point C GB/T 2539 54-56
Oil content GB/T 3554 0.8
Color GB/T 3555 27
Light stability SH/T 0404 4
Penetration 25 C,1/10mm GB/T 4985 19
Paraffin is mainly composed of solid alkane, odorless and tasteless. It is a white or light yellow translucent solid. Due to its high oil content, it is mainly used to make matches, fiberboard, canvas, etc. When polyolefin additives are added to paraffin wax, its melting point increases and its adhesion and flexibility increase. It is widely used in moisture-proof and waterproof packaging paper, paperboard, surface coating of some textiles and candle production.
Properties Unit Test Method Results
Melting point C GB/T 2539 70-72
Oil content GB/T 3554 0.8
Color - GB/T 3555 25
Light stability - SH/T 0404 5
Penetration 25 C,1/10mm GB/T 4985 19
Paraffin is mainly composed of solid alkane, odorless and tasteless. It is a white or light yellow translucent solid. Due to its high oil content, it is mainly used to make matches, fiberboard, canvas, etc. When polyolefin additives are added to paraffin wax, its melting point increases and its adhesion and flexibility increase. It is widely used in moisture-proof and waterproof packaging paper, paperboard, surface coating of some textiles and candle production.
Properties Unit Test Method Results
Melting point C GB/T 2539 70-72
Oil content GB/T 3554 0.8
Color - GB/T 3555 25
Light stability - SH/T 0404 5
Penetration
Paraffin is mainly composed of solid alkane, odorless and tasteless. It is a white or light yellow translucent solid. Due to its high oil content, it is mainly used to make matches, fiberboard, canvas, etc. When polyolefin additives are added to paraffin wax, its melting point increases and its adhesion and flexibility increase. It is widely used in moisture-proof and waterproof packaging paper, paperboard, surface coating of some textiles and candle production.
Properties Unit Test Method Results
Melting point C GB/T 2539 58-60
Oil content GB/T 3554 0.8
Color - GB/T 3555 27
Light stability - SH/T 0404 4
Penetration 25 C,1/10mm GB/T 4985 19
Paraffin is mainly composed of solid alkane, odorless and tasteless. It is a white or light yellow translucent solid. Due to its high oil content, it is mainly used to make matches, fiberboard, canvas, etc. When polyolefin additives are added to paraffin wax, its melting point increases and its adhesion and flexibility increase. It is widely used in moisture-proof and waterproof packaging paper, paperboard, surface coating of some textiles and candle production.
Properties Unit Test Method Results
Melting point C GB/T 2539 64-66
Oil content GB/T 3554 0.8
Color - GB/T 3555 25
Light stability - SH/T 0404 5
Penetration 25 C,1/10mm GB/T 4985 19
Paraffin is mainly composed of solid alkane, odorless and tasteless. It is a white or light yellow translucent solid. Due to its high oil content, it is mainly used to make matches, fiberboard, canvas, etc. When polyolefin additives are added to paraffin wax, its melting point increases and its adhesion and flexibility increase. It is widely used in moisture-proof and waterproof packaging paper, paperboard, surface coating of some textiles and candle production.
Properties Unit Test Method Results
Melting point C GB/T 2539 50-52
Oil content GB/T 3554 0.8
Color - GB/T 3555 27
Light stability - SH/T 0404 4
Penetration 25C,1/10mm GB/T 4985 19
