Russia, Venezuela, Iran SN 100 BS 150 SN 150 SN 300 SN 500
Russian,venzula, Iraq, Iran MAZUT -100 GOST 10585/75 GOST 10585/ 99
Russia, Venezuela, Iran
Russia, Venezuela, Iran
Russia, Venezuela, Iran
Tung oil is a type of wood finishing product that is derived from the pressed nut of the tung tree. Tung oil is drying oil that is similar to linseed, safflower, poppy, and soybean oil. Drying oils are perfect for wooden objects, since the oil dries to a clear film once it has made contact with the air. Pure tung oil and tung oil finishes are two distinct products that should not be confused with one another. Tung oil, also known as China Wood Oil, Lumbang oil, Noix dâ??abrasin (fr.) or simply wood oil, is made from the seed kernels of the Tung tree (Aleurites fordii and Aleurites montana, family Euphorbiaceae). Tung oil was used as a preservative for wood ships. The oil penetrates the wood, then hardens to form an impermeable hydrophobic layer (repels water) up to 5 mm into the wood. As a preservative it is effective for exterior work above and below ground, but the thin layer makes it less useful in practice. Item Specifications Color:7-10 Refractive index(20):1.5160-1.5225 Acid value(mgKOH/g):5-8 Iodine value:163-173 Washer off Experiments(282):7.5minutes max Specific gravity(20/4):0.9360-0.9395 Saponification value:190-196 FFA2.5%4% max Moisture & impurities combined:0.3% max Package: 1) by 190kgs/iron drum,80drums/15.2mts/20 FCL 2) by 950kgs/ibc tank ,20IBC /19MTS/20 FCL 3) by flexitanks of about 19-21mts/20 fcl 4) by isotanks of about 20-22mts/20 isotank.
Russian Gasoline 87 - 93 Octane, Naphtha, Russian Jet Fuel TSA1 & JP54, ESPO, D2, Russian EN590 Diesel, LNG & LPG, RPO 145, Bitumen, Russian Light Crude Oil (LCO), Urea, Pet Coke & 180CST
Anionic/cationic/non-ionic Paraffin Wax Emulsion High Solid Content
Used in Cosmetics & Medical industries. Brands:-indian & Imported
1- APPEARANCE - VISUAL - BRIGHT & CLEAR. 2- COLOUR - ASTM D 1500 - 2.0 TO 2.5 3- DENSITY@ 29.5 - ASTM D 1298 - GM/ML - 0.820 TO 0.880 4- VISCOSITY@ 40 - ASTM D 445 - CST - 45.0 TO 65.0 5- VISCOSITY @ 100 - ASTM D 445 - CST - 6.5 TO 8.0 6- VISCOSITY INDEX - ASTM D 2270 - 120 7- FLASH POINT C, - ASTM D 92 - 140 TO 220 8- POUR POINT C, - ASTM D 97 - -3 TO -6
IOC JET A-1 is a petroleum distillate blended from kerosene fractions having Aromatics below 20 % v/v, Total sulphur below 0.25 % mass, Mercaptan Sulphur below 0.002 % mass, freezing point below - 47 0 C and a flash point above 38 0 C. It contains Static Dissipator additive STADIS 450.
Density @ 15 C max.... 991 kg/m3 Viscosity @ 50 C max.... 180 mm2/s Water max... 0.5% (v/v) Sulphur max... 3.5 % (m/m) Flash Point min.... 60 0C Pour Point max... 30 0C Micro Carbon Residue max... 15 % (m/m) Ash max.... 0.1 % (m/m) Total Sediment Potential max... 0.1 % (m/m) Vanadium max.... 200 mg/kg Aluminium + Silicon max... 80 mg/kg Zinc max... 15 mg/kg Phosphorus max... 15 mg/kg Calcium max... 30 mg/kg
The unit of viscosity used is the Centistoke and the d6 fuel most frequently quoted are listed below in order of cost, the least expensive first : * IFO 380 â?? Intermediate d6 fuel oil with a maximum viscosity of 380 Centistokes * IFO 180 Intermediate d6 fuel oil with a maximum viscosity of 180 Centistokes * LS 380 Low-sulphur (
1- Antioxidant in hydro processed fuel mim/max..... 17/24 Mg/l 2- Antioxidant non hydro processed fuel max.....24 Mg/l 3- Static dissipater first doping ASA-3 max ...... 1Mg/l 4- Stadis 450 max.... 3Mg/l 5- Specific energy, net min.... 18.4 MJ/kg 6- Smoke point max.... 19M/m 7- Luminomitier number max.... 45 8-Naphthalenes max.... 3%volume 8-Total Acidity max... 0.1 MG. KOH/g 9-Aromatic max... 22.0%vol 10-Sulphur Total max... 0.3 %mass 11-sulphur Mercaptan max... 0.003 %mass 12-Recovered residuals max.... 1.5%vol 13-Loss max.... 1.5%vol 14-Flash Point max... 42 Centigrade 15-Density at 15.�°C Min/Max... 776/840 kg / m2 16-Freezing point max.... - 40 Centigrade 17-Corrosion copper (2hrs at 100c) max.... 1 18-Corrosion silver (4hrs at 100c) max.... 1 19- Filter Pressure differential mm.Hg max... 25 20-Tube deposit rating (visual) max....
1-Ash content..... 0.14%max 2-Mass fraction of sulphur.... 0.5max 3-Temperature of solidification.... 25� C max 4-Kinematics viscosity.... 118max 5- water content.... 0.5%max 6- Mechanical impurities... 0.1%max 7- Hydrogen sulphide content Hâ??S ppm..... 0.5max 8- Carbon residual.... 7%max 9- Aluminium (Al) ppm.... 5 max 10- silicone (si)..... 12 max 11- sodium (NA).... 15max 12- Asphaltene m/m... 3.6%max 13- lnltial Bolling Point deg.... 216�°C 14- Final Bolling Point deg.... 550C 15- percent recovered.... 78%vol 16- Residual.... 22%vol 17- Total Nitrogen... 0.192%m/m
1-Blend crude oil espo 2-Fuel oil mazut m100gost 10585-75/99 3-gas oil diesel D2 0.2/62 gost 305/82 4.aviation kerosene colonial grade 54jet fuel/jet A1 5.virgin d6 fuel oil 6.en 590 ppm (ulsd) 7.liquidified natural gas(lng) 8.russian liquidified petroleum gas lpg 9.russian bitumen 60/70 and 80/100 10.russian light cycle oil (LCO) 11.Rrussian diesel automotive gas oil (AGO) 12.Rusian gasoline 87-89-91-92=95 octanes Product offer
CommodiTY. JP 54 A1 Origin: Russia Delivery: ANY SAFE Port / CIF Trial Qty: 500,000(Minimum); 2 ,000,000 (Maximum) Contract Qty: 12 months + Rolls and Extension CIF Price: Net US$ 42/Barrel
Petroleum products
We manufacture and export a premium quality range of Low Aromatic White Spirit (LAWS). These spirits are acknowledged as the paint thinner, demanded in paper, pring, adhesive and chemical industry as a common organic solvent in painting or decorating. We process this spirit under the supervision of our skilled professionals by utilizing superior quality materials at our well equipped production unit. Further, this LOW AROMATIC WHITE SPIRIT (LAWS) can be easily availed by our precious clients in various packaging options at affordable price. Features: Long shelf life Free from adulteration Properly packed
a. Name of product Fuel Oil (Mazut) – CST180, CST280, CST380 b. Price of product Negotiable c. Product origin Iran, Iraq, Russia d. Key Specifications/Special Features Mazut is a heavy, low quality fuel oil which is the residue from distillation of gasoline, ligroin, kerosene, and diesel oil fractions from petroleum. It comprises all residual fuel oils, including those obtained by blending. Its kinematic viscosity is above 10 cSt at 80°C. The flash point is always above 50°C and the density is always higher than 0.90 kg/l. It may be used as boiler fuel oil, in the preparation of distillate and residual lubricating oils, in cracking or hydrogenation processes for the manufacture of motor fuel (gasoline or diesel oil), and in the production of bitumen and coke, depending on its chemical composition and properties. e. Harmonization System (HS) Code :27101950 f. Minimum Order Size : 100 MT g. Packaging details Bulk, Barrel, Tanker
